Overall: 2004/3488 fields covered

ADC

0x40012400: Analog to Digital Converter instance 1

128/128 fields covered. Toggle Registers

Show register map

ISR

ADC interrupt and status register

Offset: 0x0, reset: 0x00000000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCRDY
rw 		EOCAL
rw 		AWD3
rw 		AWD2
rw 		AWD1
rw 		OVR
rw 		EOS
rw 		EOC
rw 		EOSMP
rw 		ADRDY
rw
Toggle Fields

ADRDY

Bit 0: ADC ready flag.

Allowed values:
0: NotReady: ADC not yet ready to start conversion
1: Ready: ADC ready to start conversion

EOSMP

Bit 1: ADC group regular end of sampling flag.

Allowed values:
0: NotAtEnd: Not at the end of the samplings phase
1: AtEnd: End of sampling phase reached

EOC

Bit 2: ADC group regular end of unitary conversion flag.

Allowed values:
0: NotComplete: Channel conversion is not complete
1: Complete: Channel conversion complete

EOS

Bit 3: ADC group regular end of sequence conversions flag.

Allowed values:
0: NotComplete: Conversion sequence is not complete
1: Complete: Conversion sequence complete

OVR

Bit 4: ADC group regular overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

AWD1

Bit 7: ADC analog watchdog 1 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD2

Bit 8: ADC analog watchdog 2 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD3

Bit 9: ADC analog watchdog 3 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

EOCAL

Bit 11: End Of Calibration flag.

Allowed values:
0: NotComplete: Calibration is not complete
1: Complete: Calibration complete

CCRDY

Bit 13: Channel Configuration Ready flag.

Allowed values:
0: NotComplete: Channel configuration update not applied
1: Complete: Channel configuration update is applied

IER

ADC interrupt enable register

Offset: 0x4, reset: 0x00000000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCRDYIE
rw 		EOCALIE
rw 		AWD3IE
rw 		AWD2IE
rw 		AWD1IE
rw 		OVRIE
rw 		EOSIE
rw 		EOCIE
rw 		EOSMPIE
rw 		ADRDYIE
rw
Toggle Fields

ADRDYIE

Bit 0: ADC ready interrupt.

Allowed values:
0: Disabled: ADRDY interrupt disabled
1: Enabled: ADRDY interrupt enabled. An interrupt is generated when the ADRDY bit is set.

EOSMPIE

Bit 1: ADC group regular end of sampling interrupt.

Allowed values:
0: Disabled: EOSMP interrupt disabled
1: Enabled: EOSMP interrupt enabled. An interrupt is generated when the EOSMP bit is set.

EOCIE

Bit 2: ADC group regular end of unitary conversion interrupt.

Allowed values:
0: Disabled: EOC interrupt disabled
1: Enabled: EOC interrupt enabled. An interrupt is generated when the EOC bit is set.

EOSIE

Bit 3: ADC group regular end of sequence conversions interrupt.

Allowed values:
0: Disabled: EOS interrupt disabled
1: Enabled: EOS interrupt enabled. An interrupt is generated when the EOS bit is set.

OVRIE

Bit 4: ADC group regular overrun interrupt.

Allowed values:
0: Disabled: Overrun interrupt disabled
1: Enabled: Overrun interrupt enabled. An interrupt is generated when the OVR bit is set.

AWD1IE

Bit 7: ADC analog watchdog 1 interrupt.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD2IE

Bit 8: ADC analog watchdog 2 interrupt.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD3IE

Bit 9: ADC analog watchdog 3 interrupt.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

EOCALIE

Bit 11: End of calibration interrupt enable.

Allowed values:
0: Disabled: End of calibration interrupt disabled
1: Enabled: End of calibration interrupt enabled

CCRDYIE

Bit 13: Channel Configuration Ready Interrupt enable.

Allowed values:
0: Disabled: Channel configuration ready interrupt disabled
1: Enabled: Channel configuration ready interrupt enabled

CR

ADC control register

Offset: 0x8, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADCAL
rw 		ADVREGEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADSTP
rw 		ADSTART
rw 		ADDIS
rw 		ADEN
rw
Toggle Fields

ADEN

Bit 0: ADC enable.

Allowed values:
0: Disabled: ADC disabled
1: Enabled: ADC enabled

ADDIS

Bit 1: ADC disable.

Allowed values:
0: NotDisabling: No disable command active
1: Disabling: ADC disabling

ADSTART

Bit 2: ADC group regular conversion start.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

ADSTP

Bit 4: ADC group regular conversion stop.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

ADVREGEN

Bit 28: ADC voltage regulator enable.

Allowed values:
0: Disabled: ADC voltage regulator disabled
1: Enabled: ADC voltage regulator enabled

ADCAL

Bit 31: ADC calibration.

Allowed values:
0: NotCalibrating: ADC calibration either not yet performed or completed
1: Calibrating: ADC calibration in progress

CFGR1

ADC configuration register 1

Offset: 0xc, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AWD1CH
rw 		AWD1EN
rw 		AWD1SGL
rw 		CHSELRMOD
rw 		DISCEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AUTOFF
rw 		WAIT
rw 		CONT
rw 		OVRMOD
rw 		EXTEN
rw 		EXTSEL
rw 		ALIGN
rw 		RES
rw 		SCANDIR
rw 		DMACFG
rw 		DMAEN
rw
Toggle Fields

DMAEN

Bit 0: ADC DMA transfer enable.

Allowed values:
0: Disabled: DMA disabled
1: Enabled: DMA enabled

DMACFG

Bit 1: ADC DMA transfer configuration.

Allowed values:
0: OneShot: DMA one shot mode selected
1: Circular: DMA circular mode selected

SCANDIR

Bit 2: Scan sequence direction.

Allowed values:
0: Upward: Upward scan (from CHSEL0 to CHSEL17)
1: Backward: Backward scan (from CHSEL17 to CHSEL0)

RES

Bits 3-4: ADC data resolution.

Allowed values:
0: Bits12: 12 bits
1: Bits10: 10 bits
2: Bits8: 8 bits
3: Bits6: 6 bits

ALIGN

Bit 5: ADC data alignement.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

EXTSEL

Bits 6-8: ADC group regular external trigger source.

Allowed values:
0: TIM1_TRGO: Timer 1 TRGO event
1: TIM1_CC4: Timer 1 CC4 event
2: TIM2_TRGO: Timer 2 TRGO event
3: TIM2_CH4: Timer 2 CH4 event
5: TIM2_CH3: Timer 2 CH3 event
7: EXTI_LINE11: EXTI line 11 event

EXTEN

Bits 10-11: ADC group regular external trigger polarity.

Allowed values:
0: Disabled: Hardware trigger detection disabled
1: RisingEdge: Hardware trigger detection on the rising edge
2: FallingEdge: Hardware trigger detection on the falling edge
3: BothEdges: Hardware trigger detection on both the rising and falling edges

OVRMOD

Bit 12: ADC group regular overrun configuration.

Allowed values:
0: Preserve: ADC_DR register is preserved with the old data when an overrun is detected
1: Overwrite: ADC_DR register is overwritten with the last conversion result when an overrun is detected

CONT

Bit 13: ADC group regular continuous conversion mode.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

WAIT

Bit 14: Wait conversion mode.

Allowed values:
0: Disabled: Wait conversion mode off
1: Enabled: Wait conversion mode on

AUTOFF

Bit 15: Auto-off mode.

Allowed values:
0: Disabled: Auto-off mode disabled
1: Enabled: Auto-off mode enabled

DISCEN

Bit 16: ADC group regular sequencer discontinuous mode.

Allowed values:
0: Disabled: Discontinuous mode disabled
1: Enabled: Discontinuous mode enabled

CHSELRMOD

Bit 21: Mode selection of the ADC_CHSELR register.

Allowed values:
0: BitPerInput: Each bit of the ADC_CHSELR register enables an input
1: Sequence: ADC_CHSELR register is able to sequence up to 8 channels

AWD1SGL

Bit 22: ADC analog watchdog 1 monitoring a single channel or all channels.

Allowed values:
0: AllChannels: Analog watchdog 1 enabled on all channels
1: SingleChannel: Analog watchdog 1 enabled on a single channel

AWD1EN

Bit 23: ADC analog watchdog 1 enable on scope ADC group regular.

Allowed values:
0: Disabled: Analog watchdog 1 disabled
1: Enabled: Analog watchdog 1 enabled

AWD1CH

Bits 26-30: ADC analog watchdog 1 monitored channel selection.

Allowed values: 0x0-0x11

CFGR2

ADC configuration register 2

Offset: 0x10, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CKMODE
rw 		LFTRIG
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TOVS
rw 		OVSS
rw 		OVSR
rw 		OVSE
rw
Toggle Fields

OVSE

Bit 0: ADC oversampler enable on scope ADC group regular.

Allowed values:
0: Disabled: Oversampler disabled
1: Enabled: Oversampler enabled

OVSR

Bits 2-4: ADC oversampling ratio.

Allowed values:
0: Mul2: 2x
1: Mul4: 4x
2: Mul8: 8x
3: Mul16: 16x
4: Mul32: 32x
5: Mul64: 64x
6: Mul128: 128x
7: Mul256: 256x

OVSS

Bits 5-8: ADC oversampling shift.

Allowed values:
0: NoShift: No shift
1: Shift1: Shift 1-bit
2: Shift2: Shift 2-bits
3: Shift3: Shift 3-bits
4: Shift4: Shift 4-bits
5: Shift5: Shift 5-bits
6: Shift6: Shift 6-bits
7: Shift7: Shift 7-bits
8: Shift8: Shift 8-bits

TOVS

Bit 9: ADC oversampling discontinuous mode (triggered mode) for ADC group regular.

Allowed values:
0: TriggerAll: All oversampled conversions for a channel are done consecutively after a trigger
1: TriggerEach: Each oversampled conversion for a channel needs a trigger

LFTRIG

Bit 29: Low frequency trigger mode enable.

Allowed values:
0: Disabled: Low Frequency Trigger Mode disabled
1: Enabled: Low Frequency Trigger Mode enabled

CKMODE

Bits 30-31: ADC clock mode.

Allowed values:
0: ADCLK: ADCCLK (Asynchronous clock mode)
1: PCLK_Div2: PCLK/2 (Synchronous clock mode)
2: PCLK_Div4: PCLK/4 (Synchronous clock mode)
3: PCLK: PCLK (Synchronous clock mode)

SMPR

ADC sampling time register

Offset: 0x14, reset: 0x00000000, access: read-write

21/21 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SMPSEL18
rw 		SMPSEL17
rw 		SMPSEL16
rw 		SMPSEL15
rw 		SMPSEL14
rw 		SMPSEL13
rw 		SMPSEL12
rw 		SMPSEL11
rw 		SMPSEL10
rw 		SMPSEL9
rw 		SMPSEL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMPSEL7
rw 		SMPSEL6
rw 		SMPSEL5
rw 		SMPSEL4
rw 		SMPSEL3
rw 		SMPSEL2
rw 		SMPSEL1
rw 		SMPSEL0
rw 		SMP2
rw 		SMP1
rw
Toggle Fields

SMP1

Bits 0-2: Sampling time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles3_5: 3.5 ADC clock cycles
2: Cycles7_5: 7.5 ADC clock cycles
3: Cycles12_5: 12.5 ADC clock cycles
4: Cycles19_5: 19.5 ADC clock cycles
5: Cycles39_5: 39.5 ADC clock cycles
6: Cycles79_5: 79.5 ADC clock cycles
7: Cycles160_5: 160.5 ADC clock cycles

SMP2

Bits 4-6: Sampling time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles3_5: 3.5 ADC clock cycles
2: Cycles7_5: 7.5 ADC clock cycles
3: Cycles12_5: 12.5 ADC clock cycles
4: Cycles19_5: 19.5 ADC clock cycles
5: Cycles39_5: 39.5 ADC clock cycles
6: Cycles79_5: 79.5 ADC clock cycles
7: Cycles160_5: 160.5 ADC clock cycles

SMPSEL0

Bit 8: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL1

Bit 9: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL2

Bit 10: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL3

Bit 11: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL4

Bit 12: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL5

Bit 13: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL6

Bit 14: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL7

Bit 15: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL8

Bit 16: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL9

Bit 17: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL10

Bit 18: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL11

Bit 19: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL12

Bit 20: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL13

Bit 21: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL14

Bit 22: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL15

Bit 23: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL16

Bit 24: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL17

Bit 25: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

SMPSEL18

Bit 26: Channel sampling time selection.

Allowed values:
0: Smp1: Sampling time of CHANNELx use the setting of SMP1 register
1: Smp2: Sampling time of CHANNELx use the setting of SMP2 register

AWD1TR

watchdog threshold register

Offset: 0x20, reset: 0x0FFF0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
HT1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LT1
rw
Toggle Fields

LT1

Bits 0-11: ADC analog watchdog 1 threshold low.

Allowed values: 0x0-0xfff

HT1

Bits 16-27: ADC analog watchdog 1 threshold high.

Allowed values: 0x0-0xfff

AWD2TR

watchdog threshold register

Offset: 0x24, reset: 0x0FFF0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
HT2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LT2
rw
Toggle Fields

LT2

Bits 0-11: ADC analog watchdog 2 threshold low.

Allowed values: 0x0-0xfff

HT2

Bits 16-27: ADC analog watchdog 2 threshold high.

Allowed values: 0x0-0xfff

CHSELR0

channel selection register

Offset: 0x28, reset: 0x0FFF0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHSEL
rw
Toggle Fields

CHSEL

Bits 0-18: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSELR1

channel selection register CHSELRMOD = 1 in ADC_CFGR1

Offset: 0x28, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SQ8
rw 		SQ7
rw 		SQ6
rw 		SQ5
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SQ4
rw 		SQ3
rw 		SQ2
rw 		SQ1
rw
Toggle Fields

SQ1

Bits 0-3: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ2

Bits 4-7: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ3

Bits 8-11: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ4

Bits 12-15: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ5

Bits 16-19: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ6

Bits 20-23: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ7

Bits 24-27: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

SQ8

Bits 28-31: conversion of the sequence.

Allowed values:
0: Ch0: Channel 0 selected for the Nth conversion
1: Ch1: Channel 1 selected for the Nth conversion
2: Ch2: Channel 2 selected for the Nth conversion
3: Ch3: Channel 3 selected for the Nth conversion
4: Ch4: Channel 4 selected for the Nth conversion
5: Ch5: Channel 5 selected for the Nth conversion
6: Ch6: Channel 6 selected for the Nth conversion
7: Ch7: Channel 7 selected for the Nth conversion
8: Ch8: Channel 8 selected for the Nth conversion
9: Ch9: Channel 9 selected for the Nth conversion
10: Ch10: Channel 10 selected for the Nth conversion
11: Ch11: Channel 11 selected for the Nth conversion
12: Ch12: Channel 12 selected for the Nth conversion
13: Ch13: Channel 13 selected for the Nth conversion
14: Ch14: Channel 14 selected for the Nth conversion
15: EOS: End of sequence

AWD3TR

watchdog threshold register

Offset: 0x2c, reset: 0x0FFF0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
HT3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LT3
rw
Toggle Fields

LT3

Bits 0-11: ADC analog watchdog 3 threshold high.

Allowed values: 0x0-0xfff

HT3

Bits 16-27: ADC analog watchdog 3 threshold high.

Allowed values: 0x0-0xfff

DR

ADC group regular conversion data register

Offset: 0x40, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
r
Toggle Fields

DATA

Bits 0-15: ADC group regular conversion data.

Allowed values: 0x0-0xffff

AWD2CR

ADC analog watchdog 2 configuration register

Offset: 0xa0, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AWD2CH18
rw 		AWD2CH17
rw 		AWD2CH16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AWD2CH15
rw 		AWD2CH14
rw 		AWD2CH13
rw 		AWD2CH12
rw 		AWD2CH11
rw 		AWD2CH10
rw 		AWD2CH9
rw 		AWD2CH8
rw 		AWD2CH7
rw 		AWD2CH6
rw 		AWD2CH5
rw 		AWD2CH4
rw 		AWD2CH3
rw 		AWD2CH2
rw 		AWD2CH1
rw 		AWD2CH0
rw
Toggle Fields

AWD2CH0

Bit 0: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH1

Bit 1: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH2

Bit 2: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH3

Bit 3: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH4

Bit 4: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH5

Bit 5: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH6

Bit 6: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH7

Bit 7: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH8

Bit 8: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH9

Bit 9: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH10

Bit 10: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH11

Bit 11: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH12

Bit 12: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH13

Bit 13: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH14

Bit 14: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH15

Bit 15: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH16

Bit 16: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH17

Bit 17: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD2CH18

Bit 18: ADC analog watchdog 2 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD2
1: Monitored: ADC analog channel-x is monitored by AWD2

AWD3CR

ADC analog watchdog 3 configuration register

Offset: 0xa4, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AWD3CH18
rw 		AWD3CH17
rw 		AWD3CH16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AWD3CH15
rw 		AWD3CH14
rw 		AWD3CH13
rw 		AWD3CH12
rw 		AWD3CH11
rw 		AWD3CH10
rw 		AWD3CH9
rw 		AWD3CH8
rw 		AWD3CH7
rw 		AWD3CH6
rw 		AWD3CH5
rw 		AWD3CH4
rw 		AWD3CH3
rw 		AWD3CH2
rw 		AWD3CH1
rw 		AWD3CH0
rw
Toggle Fields

AWD3CH0

Bit 0: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH1

Bit 1: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH2

Bit 2: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH3

Bit 3: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH4

Bit 4: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH5

Bit 5: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH6

Bit 6: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH7

Bit 7: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH8

Bit 8: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH9

Bit 9: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH10

Bit 10: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH11

Bit 11: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH12

Bit 12: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH13

Bit 13: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH14

Bit 14: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH15

Bit 15: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH16

Bit 16: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH17

Bit 17: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

AWD3CH18

Bit 18: ADC analog watchdog 3 monitored channel selection.

Allowed values:
0: NotMonitored: ADC analog channel-x is not monitored by AWD3
1: Monitored: ADC analog channel-x is monitored by AWD3

CALFACT

ADC calibration factors register

Offset: 0xb4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CALFACT
rw
Toggle Fields

CALFACT

Bits 0-6: ADC calibration factor in single-ended mode.

Allowed values: 0x0-0x7f

CCR

ADC common control register

Offset: 0x308, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VBATEN
rw 		TSEN
rw 		VREFEN
rw 		PRESC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields

PRESC

Bits 18-21: ADC prescaler.

Allowed values:
0: Div1: Input ADC clock not divided
1: Div2: Input ADC clock divided by 2
2: Div4: Input ADC clock divided by 4
3: Div6: Input ADC clock divided by 6
4: Div8: Input ADC clock divided by 8
5: Div10: Input ADC clock divided by 10
6: Div12: Input ADC clock divided by 12
7: Div16: Input ADC clock divided by 16
8: Div32: Input ADC clock divided by 32
9: Div64: Input ADC clock divided by 64
10: Div128: Input ADC clock divided by 128
11: Div256: Input ADC clock divided by 256

VREFEN

Bit 22: VREFINT enable.

Allowed values:
0: Disabled: VREFINT disabled
1: Enabled: VREFINT enabled

TSEN

Bit 23: Temperature sensor enable.

Allowed values:
0: Disabled: Temperature sensor disabled
1: Enabled: Temperature sensor enabled

VBATEN

Bit 24: VBAT enable.

Allowed values:
0: Disabled: VBAT channel disabled
1: Enabled: VBAT channel enabled

AES

0x40026000: Advanced encryption standard hardware accelerator 1

5/40 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR
0x4 SR
0x8 DINR
0xc DOUTR
0x10 KEYR0
0x14 KEYR1
0x18 KEYR2
0x1c KEYR3
0x20 IVR0
0x24 IVR1
0x28 IVR2
0x2c IVR3
0x30 KEYR4
0x34 KEYR5
0x38 KEYR6
0x3c KEYR7
0x40 SUSP0R
0x44 SUSP1R
0x48 SUSP2R
0x4c SUSP3R
0x50 SUSP4R
0x54 SUSP5R
0x58 SUSP6R
0x5c SUSP7R

CR

control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NPBLB
rw 		KEYSIZE
rw 		CHMOD2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GCMPH
rw 		DMAOUTEN
rw 		DMAINEN
rw 		ERRIE
rw 		CCFIE
rw 		ERRC
rw 		CCFC
rw 		CHMOD10
rw 		MODE
rw 		DATATYPE
rw 		EN
rw
Toggle Fields

EN

Bit 0: AES enable.

DATATYPE

Bits 1-2: Data type selection (for data in and data out to/from the cryptographic block).

MODE

Bits 3-4: AES operating mode.

CHMOD10

Bits 5-6: AES chaining mode Bit1 Bit0.

CCFC

Bit 7: Computation Complete Flag Clear.

ERRC

Bit 8: Error clear.

CCFIE

Bit 9: CCF flag interrupt enable.

ERRIE

Bit 10: Error interrupt enable.

DMAINEN

Bit 11: Enable DMA management of data input phase.

DMAOUTEN

Bit 12: Enable DMA management of data output phase.

GCMPH

Bits 13-14: Used only for GCM, CCM and GMAC algorithms and has no effect when other algorithms are selected.

CHMOD2

Bit 16: AES chaining mode Bit2.

KEYSIZE

Bit 18: Key size selection.

NPBLB

Bits 20-23: Number of padding bytes in last block of payload.

SR

status register

Offset: 0x4, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BUSY
r 		WRERR
r 		RDERR
r 		CCF
r
Toggle Fields

CCF

Bit 0: Computation complete flag.

RDERR

Bit 1: Read error flag.

WRERR

Bit 2: Write error flag.

BUSY

Bit 3: Busy flag.

DINR

data input register

Offset: 0x8, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_DINR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_DINR
rw
Toggle Fields

AES_DINR

Bits 0-31: Data Input Register.

DOUTR

data output register

Offset: 0xc, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_DOUTR
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_DOUTR
r
Toggle Fields

AES_DOUTR

Bits 0-31: Data output register.

KEYR0

key register 0

Offset: 0x10, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR0
rw
Toggle Fields

AES_KEYR0

Bits 0-31: Data Output Register (LSB key [31:0]).

KEYR1

key register 1

Offset: 0x14, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR1
rw
Toggle Fields

AES_KEYR1

Bits 0-31: AES key register (key [63:32]).

KEYR2

key register 2

Offset: 0x18, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR2
rw
Toggle Fields

AES_KEYR2

Bits 0-31: AES key register (key [95:64]).

KEYR3

key register 3

Offset: 0x1c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR3
rw
Toggle Fields

AES_KEYR3

Bits 0-31: AES key register (MSB key [127:96]).

IVR0

initialization vector register 0

Offset: 0x20, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_IVR0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_IVR0
rw
Toggle Fields

AES_IVR0

Bits 0-31: initialization vector register (LSB IVR [31:0]).

IVR1

initialization vector register 1

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_IVR1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_IVR1
rw
Toggle Fields

AES_IVR1

Bits 0-31: Initialization Vector Register (IVR [63:32]).

IVR2

initialization vector register 2

Offset: 0x28, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_IVR2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_IVR2
rw
Toggle Fields

AES_IVR2

Bits 0-31: Initialization Vector Register (IVR [95:64]).

IVR3

initialization vector register 3

Offset: 0x2c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_IVR3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_IVR3
rw
Toggle Fields

AES_IVR3

Bits 0-31: Initialization Vector Register (MSB IVR [127:96]).

KEYR4

key register 4

Offset: 0x30, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR4
rw
Toggle Fields

AES_KEYR4

Bits 0-31: AES key register (MSB key [159:128]).

KEYR5

key register 5

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR5
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR5
rw
Toggle Fields

AES_KEYR5

Bits 0-31: AES key register (MSB key [191:160]).

KEYR6

key register 6

Offset: 0x38, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR6
rw
Toggle Fields

AES_KEYR6

Bits 0-31: AES key register (MSB key [223:192]).

KEYR7

key register 7

Offset: 0x3c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_KEYR7
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_KEYR7
rw
Toggle Fields

AES_KEYR7

Bits 0-31: AES key register (MSB key [255:224]).

SUSP0R

AES suspend register 0

Offset: 0x40, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP0R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP0R
rw
Toggle Fields

AES_SUSP0R

Bits 0-31: AES suspend register 0.

SUSP1R

AES suspend register 1

Offset: 0x44, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP1R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP1R
rw
Toggle Fields

AES_SUSP1R

Bits 0-31: AES suspend register 1.

SUSP2R

AES suspend register 2

Offset: 0x48, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP2R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP2R
rw
Toggle Fields

AES_SUSP2R

Bits 0-31: AES suspend register 2.

SUSP3R

AES suspend register 3

Offset: 0x4c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP3R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP3R
rw
Toggle Fields

AES_SUSP3R

Bits 0-31: AES suspend register 3.

SUSP4R

AES suspend register 4

Offset: 0x50, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP4R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP4R
rw
Toggle Fields

AES_SUSP4R

Bits 0-31: AES suspend register 4.

SUSP5R

AES suspend register 5

Offset: 0x54, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP5R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP5R
rw
Toggle Fields

AES_SUSP5R

Bits 0-31: AES suspend register 5.

SUSP6R

AES suspend register 6

Offset: 0x58, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP6R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP6R
rw
Toggle Fields

AES_SUSP6R

Bits 0-31: AES suspend register 6.

SUSP7R

AES suspend register 7

Offset: 0x5c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AES_SUSP7R
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES_SUSP7R
rw
Toggle Fields

AES_SUSP7R

Bits 0-31: AES suspend register 7.

CRC

0x40023000: Cyclic redundancy check calculation unit

0/8 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 DR
0x4 IDR
0x8 CR
0x10 INIT
0x14 POL

DR

Data register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields

DR

Bits 0-31: Data register bits.

IDR

Independent data register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR
rw
Toggle Fields

IDR

Bits 0-31: General-purpose 32-bit data register bits.

CR

Control register

Offset: 0x8, reset: 0x00000000, access: Unspecified

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REV_OUT
rw 		REV_IN
rw 		POLYSIZE
rw 		RESET
w
Toggle Fields

RESET

Bit 0: RESET bit.

POLYSIZE

Bits 3-4: Polynomial size.

REV_IN

Bits 5-6: Reverse input data.

REV_OUT

Bit 7: Reverse output data.

INIT

Initial CRC value

Offset: 0x10, reset: 0xFFFFFFFF, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CRC_INIT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRC_INIT
rw
Toggle Fields

CRC_INIT

Bits 0-31: Programmable initial CRC value.

POL

polynomial

Offset: 0x14, reset: 0x04C11DB7, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
POL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POL
rw
Toggle Fields

POL

Bits 0-31: Programmable polynomial.

DBG

0x40015800: MCU debug component

2/16 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 IDCODE
0x4 CR
0x8 APB_FZ1
0xc APB_FZ2

IDCODE

DBGMCU_IDCODE

Offset: 0x0, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
REV_ID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEV_ID
r
Toggle Fields

DEV_ID

Bits 0-11: Device identifier.

REV_ID

Bits 16-31: Revision identifie.

CR

Debug MCU configuration register

Offset: 0x4, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBG_STANDBY
rw 		DBG_STOP
rw
Toggle Fields

DBG_STOP

Bit 1: Debug Stop mode.

DBG_STANDBY

Bit 2: Debug Standby mode.

APB_FZ1

Debug MCU APB1 freeze register1

Offset: 0x8, reset: 0x00000000, access: read-write

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBG_LPTIM1_STOP
rw 		DBG_LPTIM2_STOP
rw 		DBG_I2C1_STOP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBG_IWDG_STOP
rw 		DBG_WWDG_STOP
rw 		DBG_RTC_STOP
rw 		DBG_TIM3_STOP
rw 		DBG_TIM2_STOP
rw
Toggle Fields

DBG_TIM2_STOP

Bit 0: TIM2 counter stopped when core is halted.

DBG_TIM3_STOP

Bit 1: TIM3 counter stopped when core is halted.

DBG_RTC_STOP

Bit 10: RTC counter stopped when core is halted.

DBG_WWDG_STOP

Bit 11: Window watchdog counter stopped when core is halted.

DBG_IWDG_STOP

Bit 12: Independent watchdog counter stopped when core is halted.

DBG_I2C1_STOP

Bit 21: I2C1 SMBUS timeout counter stopped when core is halted.

DBG_LPTIM2_STOP

Bit 30: LPTIM2 counter stopped when core is halted.

DBG_LPTIM1_STOP

Bit 31: LPTIM1 counter stopped when core is halted.

APB_FZ2

Debug MCU APB1 freeze register 2

Offset: 0xc, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBG_TIM17_STOP
rw 		DBG_TIM16_STOP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBG_TIM14_STOP
rw 		DBG_TIM1_STOP
rw
Toggle Fields

DBG_TIM1_STOP

Bit 11: TIM1 counter stopped when core is halted.

DBG_TIM14_STOP

Bit 15: DBG_TIM14_STOP.

DBG_TIM16_STOP

Bit 17: DBG_TIM16_STOP.

DBG_TIM17_STOP

Bit 18: DBG_TIM17_STOP.

DMA

0x40020000: DMA controller

105/115 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ISR
0x4 IFCR
0x8 CR [1]
0xc NDTR [1]
0x10 PAR [1]
0x14 MAR [1]
0x1c CR [2]
0x20 NDTR [2]
0x24 PAR [2]
0x28 MAR [2]
0x30 CR [3]
0x34 NDTR [3]
0x38 PAR [3]
0x3c MAR [3]
0x44 CR [4]
0x48 NDTR [4]
0x4c PAR [4]
0x50 MAR [4]
0x58 CR [5]
0x5c NDTR [5]
0x60 PAR [5]
0x64 MAR [5]

ISR

low interrupt status register

Offset: 0x0, reset: 0x00000000, access: read-only

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TEIF5
r 		HTIF5
r 		TCIF5
r 		GIF5
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TEIF4
r 		HTIF4
r 		TCIF4
r 		GIF4
r 		TEIF3
r 		HTIF3
r 		TCIF3
r 		GIF3
r 		TEIF2
r 		HTIF2
r 		TCIF2
r 		GIF2
r 		TEIF1
r 		HTIF1
r 		TCIF1
r 		GIF1
r
Toggle Fields

GIF1

Bit 0: Channel 1 global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF1

Bit 1: Channel 1 transfer complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF1

Bit 2: Channel 1 half transfer flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF1

Bit 3: Channel 1 transfer error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF2

Bit 4: Channel 2 global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF2

Bit 5: Channel 2 transfer complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF2

Bit 6: Channel 2 half transfer flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF2

Bit 7: Channel 2 transfer error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF3

Bit 8: Channel 3 global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF3

Bit 9: Channel 3 transfer complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF3

Bit 10: Channel 3 half transfer flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF3

Bit 11: Channel 3 transfer error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF4

Bit 12: Channel 4 global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF4

Bit 13: Channel 4 transfer complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF4

Bit 14: Channel 4 half transfer flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF4

Bit 15: Channel 4 transfer error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF5

Bit 16: Channel 5 global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF5

Bit 17: Channel 5 transfer complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF5

Bit 18: Channel 5 half transfer flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF5

Bit 19: Channel 5 transfer error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

IFCR

DMA interrupt flag clear register

Offset: 0x4, reset: 0x00000000, access: write-only

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTEIF5
w 		CHTIF5
w 		CTCIF5
w 		CGIF5
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTEIF4
w 		CHTIF4
w 		CTCIF4
w 		CGIF4
w 		CTEIF3
w 		CHTIF3
w 		CTCIF3
w 		CGIF3
w 		CTEIF2
w 		CHTIF2
w 		CTCIF2
w 		CGIF2
w 		CTEIF1
w 		CHTIF1
w 		CTCIF1
w 		CGIF1
w
Toggle Fields

CGIF1

Bit 0: Clear channel 1 global interrupt flag.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF1

Bit 1: Clear channel 1 transfer complete flag.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF1

Bit 2: Clear channel 1 half transfer flag.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF1

Bit 3: Clear channel 1 transfer error flag.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF2

Bit 4: Clear channel 2 global interrupt flag.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF2

Bit 5: Clear channel 2 transfer complete flag.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF2

Bit 6: Clear channel 2 half transfer flag.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF2

Bit 7: Clear channel 2 transfer error flag.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF3

Bit 8: Clear channel 3 global interrupt flag.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF3

Bit 9: Clear channel 3 transfer complete flag.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF3

Bit 10: Clear channel 3 half transfer flag.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF3

Bit 11: Clear channel 3 transfer error flag.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF4

Bit 12: Clear channel 4 global interrupt flag.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF4

Bit 13: Clear channel 4 transfer complete flag.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF4

Bit 14: Clear channel 4 half transfer flag.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF4

Bit 15: Clear channel 4 transfer error flag.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF5

Bit 16: Clear channel 5 global interrupt flag.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF5

Bit 17: Clear channel 5 transfer complete flag.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF5

Bit 18: Clear channel 5 half transfer flag.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF5

Bit 19: Clear channel 5 transfer error flag.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CR [1]

DMA channel x configuration register

Offset: 0x8, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM2MEM
rw 		PL
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		TEIE
rw 		HTIE
rw 		TCIE
rw 		EN
rw
Toggle Fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [1]

DMA channel x number of data register

Offset: 0xc, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [1]

DMA channel x peripheral address register

Offset: 0x10, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields

PA

Bits 0-31: Peripheral address.

MAR [1]

DMA channel x memory address register

Offset: 0x14, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MA
rw
Toggle Fields

MA

Bits 0-31: Memory address.

CR [2]

DMA channel x configuration register

Offset: 0x1c, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM2MEM
rw 		PL
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		TEIE
rw 		HTIE
rw 		TCIE
rw 		EN
rw
Toggle Fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [2]

DMA channel x number of data register

Offset: 0x20, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [2]

DMA channel x peripheral address register

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields

PA

Bits 0-31: Peripheral address.

MAR [2]

DMA channel x memory address register

Offset: 0x28, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MA
rw
Toggle Fields

MA

Bits 0-31: Memory address.

CR [3]

DMA channel x configuration register

Offset: 0x30, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM2MEM
rw 		PL
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		TEIE
rw 		HTIE
rw 		TCIE
rw 		EN
rw
Toggle Fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [3]

DMA channel x number of data register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [3]

DMA channel x peripheral address register

Offset: 0x38, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields

PA

Bits 0-31: Peripheral address.

MAR [3]

DMA channel x memory address register

Offset: 0x3c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MA
rw
Toggle Fields

MA

Bits 0-31: Memory address.

CR [4]

DMA channel x configuration register

Offset: 0x44, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM2MEM
rw 		PL
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		TEIE
rw 		HTIE
rw 		TCIE
rw 		EN
rw
Toggle Fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [4]

DMA channel x number of data register

Offset: 0x48, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [4]

DMA channel x peripheral address register

Offset: 0x4c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields

PA

Bits 0-31: Peripheral address.

MAR [4]

DMA channel x memory address register

Offset: 0x50, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MA
rw
Toggle Fields

MA

Bits 0-31: Memory address.

CR [5]

DMA channel x configuration register

Offset: 0x58, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM2MEM
rw 		PL
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		TEIE
rw 		HTIE
rw 		TCIE
rw 		EN
rw
Toggle Fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [5]

DMA channel x number of data register

Offset: 0x5c, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [5]

DMA channel x peripheral address register

Offset: 0x60, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields

PA

Bits 0-31: Peripheral address.

MAR [5]

DMA channel x memory address register

Offset: 0x64, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MA
rw
Toggle Fields

MA

Bits 0-31: Memory address.

DMAMUX

0x40020800: DMAMUX

1/71 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 C0CR
0x4 C1CR
0x8 C2CR
0xc C3CR
0x10 C4CR
0x14 C5CR
0x18 C6CR
0x100 RG0CR
0x104 RG1CR
0x108 RG2CR
0x10c RG3CR
0x140 RGSR
0x144 RGCFR

C0CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C1CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x4, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C2CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x8, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C3CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0xc, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C4CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x10, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C5CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x14, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

C6CR

DMAMux - DMA request line multiplexer channel x control register

Offset: 0x18, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SYNC_ID
rw 		NBREQ
rw 		SPOL
rw 		SE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EGE
rw 		SOIE
rw 		DMAREQ_ID
rw
Toggle Fields

DMAREQ_ID

Bits 0-7: Input DMA request line selected.

SOIE

Bit 8: Interrupt enable at synchronization event overrun.

EGE

Bit 9: Event generation enable/disable.

SE

Bit 16: Synchronous operating mode enable/disable.

SPOL

Bits 17-18: Synchronization event type selector Defines the synchronization event on the selected synchronization input:.

NBREQ

Bits 19-23: Number of DMA requests to forward Defines the number of DMA requests forwarded before output event is generated. In synchronous mode, it also defines the number of DMA requests to forward after a synchronization event, then stop forwarding. The actual number of DMA requests forwarded is NBREQ+1. Note: This field can only be written when both SE and EGE bits are reset..

SYNC_ID

Bits 24-28: Synchronization input selected.

RG0CR

DMAMux - DMA request generator channel x control register

Offset: 0x100, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GNBREQ
rw 		GPOL
rw 		GE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIE
rw 		SIG_ID
rw
Toggle Fields

SIG_ID

Bits 0-4: DMA request trigger input selected.

OIE

Bit 8: Interrupt enable at trigger event overrun.

GE

Bit 16: DMA request generator channel enable/disable.

GPOL

Bits 17-18: DMA request generator trigger event type selection Defines the trigger event on the selected DMA request trigger input.

GNBREQ

Bits 19-23: Number of DMA requests to generate Defines the number of DMA requests generated after a trigger event, then stop generating. The actual number of generated DMA requests is GNBREQ+1. Note: This field can only be written when GE bit is reset..

RG1CR

DMAMux - DMA request generator channel x control register

Offset: 0x104, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GNBREQ
rw 		GPOL
rw 		GE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIE
rw 		SIG_ID
rw
Toggle Fields

SIG_ID

Bits 0-4: DMA request trigger input selected.

OIE

Bit 8: Interrupt enable at trigger event overrun.

GE

Bit 16: DMA request generator channel enable/disable.

GPOL

Bits 17-18: DMA request generator trigger event type selection Defines the trigger event on the selected DMA request trigger input.

GNBREQ

Bits 19-23: Number of DMA requests to generate Defines the number of DMA requests generated after a trigger event, then stop generating. The actual number of generated DMA requests is GNBREQ+1. Note: This field can only be written when GE bit is reset..

RG2CR

DMAMux - DMA request generator channel x control register

Offset: 0x108, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GNBREQ
rw 		GPOL
rw 		GE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIE
rw 		SIG_ID
rw
Toggle Fields

SIG_ID

Bits 0-4: DMA request trigger input selected.

OIE

Bit 8: Interrupt enable at trigger event overrun.

GE

Bit 16: DMA request generator channel enable/disable.

GPOL

Bits 17-18: DMA request generator trigger event type selection Defines the trigger event on the selected DMA request trigger input.

GNBREQ

Bits 19-23: Number of DMA requests to generate Defines the number of DMA requests generated after a trigger event, then stop generating. The actual number of generated DMA requests is GNBREQ+1. Note: This field can only be written when GE bit is reset..

RG3CR

DMAMux - DMA request generator channel x control register

Offset: 0x10c, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GNBREQ
rw 		GPOL
rw 		GE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIE
rw 		SIG_ID
rw
Toggle Fields

SIG_ID

Bits 0-4: DMA request trigger input selected.

OIE

Bit 8: Interrupt enable at trigger event overrun.

GE

Bit 16: DMA request generator channel enable/disable.

GPOL

Bits 17-18: DMA request generator trigger event type selection Defines the trigger event on the selected DMA request trigger input.

GNBREQ

Bits 19-23: Number of DMA requests to generate Defines the number of DMA requests generated after a trigger event, then stop generating. The actual number of generated DMA requests is GNBREQ+1. Note: This field can only be written when GE bit is reset..

RGSR

DMAMux - DMA request generator status register

Offset: 0x140, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OF
r
Toggle Fields

OF

Bits 0-3: Trigger event overrun flag The flag is set when a trigger event occurs on DMA request generator channel x, while the DMA request generator counter value is lower than GNBREQ. The flag is cleared by writing 1 to the corresponding COFx bit in DMAMUX_RGCFR register..

RGCFR

DMAMux - DMA request generator clear flag register

Offset: 0x144, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
COF
w
Toggle Fields

COF

Bits 0-3: Clear trigger event overrun flag Upon setting, this bit clears the corresponding overrun flag OFx in the DMAMUX_RGCSR register..

EXTI

0x40021800: External interrupt/event controller

156/156 fields covered. Toggle Registers

Show register map

RTSR1

EXTI rising trigger selection register

Offset: 0x0, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TR15
rw 		TR14
rw 		TR13
rw 		TR12
rw 		TR11
rw 		TR10
rw 		TR9
rw 		TR8
rw 		TR7
rw 		TR6
rw 		TR5
rw 		TR4
rw 		TR3
rw 		TR2
rw 		TR1
rw 		TR0
rw
Toggle Fields

TR0

Bit 0: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR1

Bit 1: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR2

Bit 2: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR3

Bit 3: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR4

Bit 4: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR5

Bit 5: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR6

Bit 6: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR7

Bit 7: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR8

Bit 8: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR9

Bit 9: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR10

Bit 10: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR11

Bit 11: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR12

Bit 12: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR13

Bit 13: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR14

Bit 14: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR15

Bit 15: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR16

Bit 16: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTSR1

EXTI falling trigger selection register

Offset: 0x4, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TR15
rw 		TR14
rw 		TR13
rw 		TR12
rw 		TR11
rw 		TR10
rw 		TR9
rw 		TR8
rw 		TR7
rw 		TR6
rw 		TR5
rw 		TR4
rw 		TR3
rw 		TR2
rw 		TR1
rw 		TR0
rw
Toggle Fields

TR0

Bit 0: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR1

Bit 1: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR2

Bit 2: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR3

Bit 3: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR4

Bit 4: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR5

Bit 5: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR6

Bit 6: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR7

Bit 7: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR8

Bit 8: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR9

Bit 9: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR10

Bit 10: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR11

Bit 11: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR12

Bit 12: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR13

Bit 13: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR14

Bit 14: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR15

Bit 15: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR16

Bit 16: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIER1

EXTI software interrupt event register

Offset: 0x8, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SWIER16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWIER15
rw 		SWIER14
rw 		SWIER13
rw 		SWIER12
rw 		SWIER11
rw 		SWIER10
rw 		SWIER9
rw 		SWIER8
rw 		SWIER7
rw 		SWIER6
rw 		SWIER5
rw 		SWIER4
rw 		SWIER3
rw 		SWIER2
rw 		SWIER1
rw 		SWIER0
rw
Toggle Fields

SWIER0

Bit 0: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER1

Bit 1: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER2

Bit 2: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER3

Bit 3: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER4

Bit 4: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER5

Bit 5: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER6

Bit 6: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER7

Bit 7: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER8

Bit 8: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER9

Bit 9: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER10

Bit 10: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER11

Bit 11: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER12

Bit 12: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER13

Bit 13: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER14

Bit 14: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER15

Bit 15: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

SWIER16

Bit 16: Rising trigger event configuration bit of Configurable Event input.

Allowed values:
1: Pend: Generates an interrupt request

RPR1

EXTI rising edge pending register

Offset: 0xc, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RPIF16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RPIF15
rw 		RPIF14
rw 		RPIF13
rw 		RPIF12
rw 		RPIF11
rw 		RPIF10
rw 		RPIF9
rw 		RPIF8
rw 		RPIF7
rw 		RPIF6
rw 		RPIF5
rw 		RPIF4
rw 		RPIF3
rw 		RPIF2
rw 		RPIF1
rw 		RPIF0
rw
Toggle Fields

RPIF0

Bit 0: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF1

Bit 1: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF2

Bit 2: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF3

Bit 3: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF4

Bit 4: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF5

Bit 5: configurable event inputs x rising edge Pending bit.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF6

Bit 6: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF7

Bit 7: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF8

Bit 8: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF9

Bit 9: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF10

Bit 10: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF11

Bit 11: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF12

Bit 12: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF13

Bit 13: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF14

Bit 14: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF15

Bit 15: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

RPIF16

Bit 16: configurable event inputs x rising edge Pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPR1

EXTI falling edge pending register

Offset: 0x10, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FPIF16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FPIF15
rw 		FPIF14
rw 		FPIF13
rw 		FPIF12
rw 		FPIF11
rw 		FPIF10
rw 		FPIF9
rw 		FPIF8
rw 		FPIF7
rw 		FPIF6
rw 		FPIF5
rw 		FPIF4
rw 		FPIF3
rw 		FPIF2
rw 		FPIF1
rw 		FPIF0
rw
Toggle Fields

FPIF0

Bit 0: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF1

Bit 1: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF2

Bit 2: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF3

Bit 3: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF4

Bit 4: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF5

Bit 5: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF6

Bit 6: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF7

Bit 7: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF8

Bit 8: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF9

Bit 9: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF10

Bit 10: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF11

Bit 11: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF12

Bit 12: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF13

Bit 13: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF14

Bit 14: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF15

Bit 15: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FPIF16

Bit 16: configurable event inputs x falling edge pending bit..

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

EXTICR1

EXTI external interrupt selection register

Offset: 0x60, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EXTI24_31
rw 		EXTI16_23
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI8_15
rw 		EXTI0_7
rw
Toggle Fields

EXTI0_7

Bits 0-7: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI8_15

Bits 8-15: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI16_23

Bits 16-23: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI24_31

Bits 24-31: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTICR2

EXTI external interrupt selection register

Offset: 0x64, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EXTI24_31
rw 		EXTI16_23
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI8_15
rw 		EXTI0_7
rw
Toggle Fields

EXTI0_7

Bits 0-7: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI8_15

Bits 8-15: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI16_23

Bits 16-23: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI24_31

Bits 24-31: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTICR3

EXTI external interrupt selection register

Offset: 0x68, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EXTI24_31
rw 		EXTI16_23
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI8_15
rw 		EXTI0_7
rw
Toggle Fields

EXTI0_7

Bits 0-7: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI8_15

Bits 8-15: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI16_23

Bits 16-23: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI24_31

Bits 24-31: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTICR4

EXTI external interrupt selection register

Offset: 0x6c, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EXTI24_31
rw 		EXTI16_23
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI8_15
rw 		EXTI0_7
rw
Toggle Fields

EXTI0_7

Bits 0-7: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI8_15

Bits 8-15: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI16_23

Bits 16-23: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

EXTI24_31

Bits 24-31: GPIO port selection.

Allowed values:
0: PA: GPIO port A selected
1: PB: GPIO port B selected
2: PC: GPIO port C selected
3: PD: GPIO port D selected
5: PF: GPIO port F selected

IMR1

EXTI CPU wakeup with interrupt mask register

Offset: 0x80, reset: 0xFFF80000, access: read-write

29/29 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IM31
rw 		IM30
rw 		IM29
rw 		IM28
rw 		IM26
rw 		IM25
rw 		IM24
rw 		IM23
rw 		IM22
rw 		IM21
rw 		IM20
rw 		IM19
rw 		IM16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IM15
rw 		IM14
rw 		IM13
rw 		IM12
rw 		IM11
rw 		IM10
rw 		IM9
rw 		IM8
rw 		IM7
rw 		IM6
rw 		IM5
rw 		IM4
rw 		IM3
rw 		IM2
rw 		IM1
rw 		IM0
rw
Toggle Fields

IM0

Bit 0: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM1

Bit 1: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM2

Bit 2: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM3

Bit 3: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM4

Bit 4: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM5

Bit 5: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM6

Bit 6: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM7

Bit 7: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM8

Bit 8: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM9

Bit 9: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM10

Bit 10: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM11

Bit 11: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM12

Bit 12: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM13

Bit 13: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM14

Bit 14: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM15

Bit 15: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM16

Bit 16: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM19

Bit 19: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM20

Bit 20: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM21

Bit 21: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM22

Bit 22: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM23

Bit 23: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM24

Bit 24: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM25

Bit 25: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM26

Bit 26: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM28

Bit 28: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM29

Bit 29: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM30

Bit 30: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

IM31

Bit 31: CPU wakeup with interrupt mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EMR1

EXTI CPU wakeup with event mask register

Offset: 0x84, reset: 0x00000000, access: read-write

26/26 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EM31
rw 		EM30
rw 		EM29
rw 		EM28
rw 		EM26
rw 		EM25
rw 		EM23
rw 		EM21
rw 		EM19
rw 		EM16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EM15
rw 		EM14
rw 		EM13
rw 		EM12
rw 		EM11
rw 		EM10
rw 		EM9
rw 		EM8
rw 		EM7
rw 		EM6
rw 		EM5
rw 		EM4
rw 		EM3
rw 		EM2
rw 		EM1
rw 		EM0
rw
Toggle Fields

EM0

Bit 0: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM1

Bit 1: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM2

Bit 2: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM3

Bit 3: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM4

Bit 4: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM5

Bit 5: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM6

Bit 6: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM7

Bit 7: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM8

Bit 8: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM9

Bit 9: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM10

Bit 10: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM11

Bit 11: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM12

Bit 12: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM13

Bit 13: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM14

Bit 14: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM15

Bit 15: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM16

Bit 16: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM19

Bit 19: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM21

Bit 21: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM23

Bit 23: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM25

Bit 25: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM26

Bit 26: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM28

Bit 28: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM29

Bit 29: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM30

Bit 30: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EM31

Bit 31: CPU wakeup with event mask on event input.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

FLASH

0x40022000: Flash

2/68 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ACR
0x8 KEYR
0xc OPTKEYR
0x10 SR
0x14 CR
0x18 ECCR
0x20 OPTR
0x24 PCROP1ASR
0x28 PCROP1AER
0x2c WRP1AR
0x30 WRP1BR
0x34 PCROP1BSR
0x38 PCROP1BER
0x80 SECR

ACR

Access control register

Offset: 0x0, reset: 0x00000600, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBG_SWEN
rw 		EMPTY
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ICRST
rw 		ICEN
rw 		PRFTEN
rw 		LATENCY
rw
Toggle Fields

LATENCY

Bits 0-2: Latency.

PRFTEN

Bit 8: Prefetch enable.

ICEN

Bit 9: Instruction cache enable.

ICRST

Bit 11: Instruction cache reset.

EMPTY

Bit 16: Flash User area empty.

DBG_SWEN

Bit 18: Debug access software enable.

KEYR

Flash key register

Offset: 0x8, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
KEYR
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEYR
w
Toggle Fields

KEYR

Bits 0-31: KEYR.

OPTKEYR

Option byte key register

Offset: 0xc, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OPTKEYR
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OPTKEYR
w
Toggle Fields

OPTKEYR

Bits 0-31: Option byte key.

SR

Status register

Offset: 0x10, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CFGBSY
rw 		BSY
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OPTVERR
rw 		RDERR
rw 		FASTERR
rw 		MISERR
rw 		PGSERR
rw 		SIZERR
rw 		PGAERR
rw 		WRPERR
rw 		PROGERR
rw 		OPERR
rw 		EOP
rw
Toggle Fields

EOP

Bit 0: End of operation.

OPERR

Bit 1: Operation error.

PROGERR

Bit 3: Programming error.

WRPERR

Bit 4: Write protected error.

PGAERR

Bit 5: Programming alignment error.

SIZERR

Bit 6: Size error.

PGSERR

Bit 7: Programming sequence error.

MISERR

Bit 8: Fast programming data miss error.

FASTERR

Bit 9: Fast programming error.

RDERR

Bit 14: PCROP read error.

OPTVERR

Bit 15: Option and Engineering bits loading validity error.

BSY

Bit 16: Busy.

CFGBSY

Bit 18: Programming or erase configuration busy..

CR

Flash control register

Offset: 0x14, reset: 0xC0000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LOCK
rw 		OPTLOCK
rw 		SEC_PROT
rw 		OBL_LAUNCH
rw 		RDERRIE
rw 		ERRIE
rw 		EOPIE
rw 		FSTPG
rw 		OPTSTRT
rw 		STRT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PNB
rw 		MER
rw 		PER
rw 		PG
rw
Toggle Fields

PG

Bit 0: Programming.

PER

Bit 1: Page erase.

MER

Bit 2: Mass erase.

PNB

Bits 3-8: Page number.

STRT

Bit 16: Start.

OPTSTRT

Bit 17: Options modification start.

FSTPG

Bit 18: Fast programming.

EOPIE

Bit 24: End of operation interrupt enable.

ERRIE

Bit 25: Error interrupt enable.

RDERRIE

Bit 26: PCROP read error interrupt enable.

OBL_LAUNCH

Bit 27: Force the option byte loading.

SEC_PROT

Bit 28: Securable memory area protection enable.

OPTLOCK

Bit 30: Options Lock.

LOCK

Bit 31: FLASH_CR Lock.

ECCR

Flash ECC register

Offset: 0x18, reset: 0x00000000, access: Unspecified

2/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ECCD
rw 		ECCC
rw 		ECCIE
rw 		SYSF_ECC
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDR_ECC
r
Toggle Fields

ADDR_ECC

Bits 0-13: ECC fail address.

SYSF_ECC

Bit 20: ECC fail for Corrected ECC Error or Double ECC Error in info block.

ECCIE

Bit 24: ECC correction interrupt enable.

ECCC

Bit 30: ECC correction.

ECCD

Bit 31: ECC detection.

OPTR

Flash option register

Offset: 0x20, reset: 0xF0000000, access: read-write

0/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IRHEN
rw 		NRST_MODE
rw 		nBOOT0
rw 		nBOOT1
rw 		nBOOT_SEL
rw 		RAM_PARITY_CHECK
rw 		WWDG_SW
rw 		IWDG_STDBY
rw 		IWDG_STOP
rw 		IDWG_SW
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
nRSTS_HDW
rw 		nRST_STDBY
rw 		nRST_STOP
rw 		BORR_LEV
rw 		BORF_LEV
rw 		BOREN
rw 		RDP
rw
Toggle Fields

RDP

Bits 0-7: Read protection level.

BOREN

Bit 8: BOR reset Level.

BORF_LEV

Bits 9-10: These bits contain the VDD supply level threshold that activates the reset.

BORR_LEV

Bits 11-12: These bits contain the VDD supply level threshold that releases the reset..

nRST_STOP

Bit 13: nRST_STOP.

nRST_STDBY

Bit 14: nRST_STDBY.

nRSTS_HDW

Bit 15: nRSTS_HDW.

IDWG_SW

Bit 16: Independent watchdog selection.

IWDG_STOP

Bit 17: Independent watchdog counter freeze in Stop mode.

IWDG_STDBY

Bit 18: Independent watchdog counter freeze in Standby mode.

WWDG_SW

Bit 19: Window watchdog selection.

RAM_PARITY_CHECK

Bit 22: SRAM parity check control.

nBOOT_SEL

Bit 24: nBOOT_SEL.

nBOOT1

Bit 25: Boot configuration.

nBOOT0

Bit 26: nBOOT0 option bit.

NRST_MODE

Bits 27-28: NRST_MODE.

IRHEN

Bit 29: Internal reset holder enable bit.

PCROP1ASR

Flash PCROP zone A Start address register

Offset: 0x24, reset: 4294967295, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PCROP1A_STRT
rw
Toggle Fields

PCROP1A_STRT

Bits 0-7: PCROP1A area start offset.

PCROP1AER

Flash PCROP zone A End address register

Offset: 0x28, reset: 0, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PCROP_RDP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PCROP1A_END
rw
Toggle Fields

PCROP1A_END

Bits 0-7: PCROP1A area end offset.

PCROP_RDP

Bit 31: PCROP area preserved when RDP level decreased.

WRP1AR

Flash WRP area A address register

Offset: 0x2c, reset: 255, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WRP1A_END
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WRP1A_STRT
rw
Toggle Fields

WRP1A_STRT

Bits 0-5: WRP area A start offset.

WRP1A_END

Bits 16-21: WRP area A end offset.

WRP1BR

Flash WRP area B address register

Offset: 0x30, reset: 255, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WRP1B_END
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WRP1B_STRT
rw
Toggle Fields

WRP1B_STRT

Bits 0-5: WRP area B start offset.

WRP1B_END

Bits 16-21: WRP area B end offset.

PCROP1BSR

Flash PCROP zone B Start address register

Offset: 0x34, reset: 4294967295, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PCROP1B_STRT
rw
Toggle Fields

PCROP1B_STRT

Bits 0-7: PCROP1B area start offset.

PCROP1BER

Flash PCROP zone B End address register

Offset: 0x38, reset: 0, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PCROP1B_END
rw
Toggle Fields

PCROP1B_END

Bits 0-7: PCROP1B area end offset.

SECR

Flash Security register

Offset: 0x80, reset: 0, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BOOT_LOCK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEC_SIZE
rw
Toggle Fields

SEC_SIZE

Bits 0-6: Securable memory area size.

BOOT_LOCK

Bit 16: used to force boot from user area.

FPU

0xe000ef34: Floting point unit

0/24 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 FPCCR
0x4 FPCAR
0x8 FPSCR

FPCCR

Floating-point context control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ASPEN
rw 		LSPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MONRDY
rw 		BFRDY
rw 		MMRDY
rw 		HFRDY
rw 		THREAD
rw 		USER
rw 		LSPACT
rw
Toggle Fields

LSPACT

Bit 0: LSPACT.

USER

Bit 1: USER.

THREAD

Bit 3: THREAD.

HFRDY

Bit 4: HFRDY.

MMRDY

Bit 5: MMRDY.

BFRDY

Bit 6: BFRDY.

MONRDY

Bit 8: MONRDY.

LSPEN

Bit 30: LSPEN.

ASPEN

Bit 31: ASPEN.

FPCAR

Floating-point context address register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDRESS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDRESS
rw
Toggle Fields

ADDRESS

Bits 3-31: Location of unpopulated floating-point.

FPSCR

Floating-point status control register

Offset: 0x8, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
N
rw 		Z
rw 		C
rw 		V
rw 		AHP
rw 		DN
rw 		FZ
rw 		RMode
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDC
rw 		IXC
rw 		UFC
rw 		OFC
rw 		DZC
rw 		IOC
rw
Toggle Fields

IOC

Bit 0: Invalid operation cumulative exception bit.

DZC

Bit 1: Division by zero cumulative exception bit..

OFC

Bit 2: Overflow cumulative exception bit.

UFC

Bit 3: Underflow cumulative exception bit.

IXC

Bit 4: Inexact cumulative exception bit.

IDC

Bit 7: Input denormal cumulative exception bit..

RMode

Bits 22-23: Rounding Mode control field.

FZ

Bit 24: Flush-to-zero mode control bit:.

DN

Bit 25: Default NaN mode control bit.

AHP

Bit 26: Alternative half-precision control bit.

V

Bit 28: Overflow condition code flag.

C

Bit 29: Carry condition code flag.

Z

Bit 30: Zero condition code flag.

N

Bit 31: Negative condition code flag.

FPU_CPACR

0xe000ed88: Floating point unit CPACR

0/1 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CPACR

CPACR

Coprocessor access control register

Offset: 0x0, reset: 0x0000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields

CP

Bits 20-23: CP.

GPIOA

0x50000000: General-purpose I/Os

161/177 fields covered. Toggle Registers

Show register map

MODER

GPIO port mode register

Offset: 0x0, reset: 0xEBFFFFFF, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x0C000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, reset: 0x24000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL7
rw 		AFSEL6
rw 		AFSEL5
rw 		AFSEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL3
rw 		AFSEL2
rw 		AFSEL1
rw 		AFSEL0
rw
Toggle Fields

AFSEL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL15
rw 		AFSEL14
rw 		AFSEL13
rw 		AFSEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL11
rw 		AFSEL10
rw 		AFSEL9
rw 		AFSEL8
rw
Toggle Fields

AFSEL8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

BRR

port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
Toggle Fields

BR0

Bit 0: Port Reset bit.

BR1

Bit 1: Port Reset bit.

BR2

Bit 2: Port Reset bit.

BR3

Bit 3: Port Reset bit.

BR4

Bit 4: Port Reset bit.

BR5

Bit 5: Port Reset bit.

BR6

Bit 6: Port Reset bit.

BR7

Bit 7: Port Reset bit.

BR8

Bit 8: Port Reset bit.

BR9

Bit 9: Port Reset bit.

BR10

Bit 10: Port Reset bit.

BR11

Bit 11: Port Reset bit.

BR12

Bit 12: Port Reset bit.

BR13

Bit 13: Port Reset bit.

BR14

Bit 14: Port Reset bit.

BR15

Bit 15: Port Reset bit.

GPIOB

0x50000400: General-purpose I/Os

161/177 fields covered. Toggle Registers

Show register map

MODER

GPIO port mode register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL7
rw 		AFSEL6
rw 		AFSEL5
rw 		AFSEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL3
rw 		AFSEL2
rw 		AFSEL1
rw 		AFSEL0
rw
Toggle Fields

AFSEL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL15
rw 		AFSEL14
rw 		AFSEL13
rw 		AFSEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL11
rw 		AFSEL10
rw 		AFSEL9
rw 		AFSEL8
rw
Toggle Fields

AFSEL8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

BRR

port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
Toggle Fields

BR0

Bit 0: Port Reset bit.

BR1

Bit 1: Port Reset bit.

BR2

Bit 2: Port Reset bit.

BR3

Bit 3: Port Reset bit.

BR4

Bit 4: Port Reset bit.

BR5

Bit 5: Port Reset bit.

BR6

Bit 6: Port Reset bit.

BR7

Bit 7: Port Reset bit.

BR8

Bit 8: Port Reset bit.

BR9

Bit 9: Port Reset bit.

BR10

Bit 10: Port Reset bit.

BR11

Bit 11: Port Reset bit.

BR12

Bit 12: Port Reset bit.

BR13

Bit 13: Port Reset bit.

BR14

Bit 14: Port Reset bit.

BR15

Bit 15: Port Reset bit.

GPIOC

0x50000800: General-purpose I/Os

161/177 fields covered. Toggle Registers

Show register map

MODER

GPIO port mode register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL7
rw 		AFSEL6
rw 		AFSEL5
rw 		AFSEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL3
rw 		AFSEL2
rw 		AFSEL1
rw 		AFSEL0
rw
Toggle Fields

AFSEL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL15
rw 		AFSEL14
rw 		AFSEL13
rw 		AFSEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL11
rw 		AFSEL10
rw 		AFSEL9
rw 		AFSEL8
rw
Toggle Fields

AFSEL8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

BRR

port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
Toggle Fields

BR0

Bit 0: Port Reset bit.

BR1

Bit 1: Port Reset bit.

BR2

Bit 2: Port Reset bit.

BR3

Bit 3: Port Reset bit.

BR4

Bit 4: Port Reset bit.

BR5

Bit 5: Port Reset bit.

BR6

Bit 6: Port Reset bit.

BR7

Bit 7: Port Reset bit.

BR8

Bit 8: Port Reset bit.

BR9

Bit 9: Port Reset bit.

BR10

Bit 10: Port Reset bit.

BR11

Bit 11: Port Reset bit.

BR12

Bit 12: Port Reset bit.

BR13

Bit 13: Port Reset bit.

BR14

Bit 14: Port Reset bit.

BR15

Bit 15: Port Reset bit.

GPIOD

0x50000c00: General-purpose I/Os

161/177 fields covered. Toggle Registers

Show register map

MODER

GPIO port mode register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL7
rw 		AFSEL6
rw 		AFSEL5
rw 		AFSEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL3
rw 		AFSEL2
rw 		AFSEL1
rw 		AFSEL0
rw
Toggle Fields

AFSEL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL15
rw 		AFSEL14
rw 		AFSEL13
rw 		AFSEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL11
rw 		AFSEL10
rw 		AFSEL9
rw 		AFSEL8
rw
Toggle Fields

AFSEL8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

BRR

port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
Toggle Fields

BR0

Bit 0: Port Reset bit.

BR1

Bit 1: Port Reset bit.

BR2

Bit 2: Port Reset bit.

BR3

Bit 3: Port Reset bit.

BR4

Bit 4: Port Reset bit.

BR5

Bit 5: Port Reset bit.

BR6

Bit 6: Port Reset bit.

BR7

Bit 7: Port Reset bit.

BR8

Bit 8: Port Reset bit.

BR9

Bit 9: Port Reset bit.

BR10

Bit 10: Port Reset bit.

BR11

Bit 11: Port Reset bit.

BR12

Bit 12: Port Reset bit.

BR13

Bit 13: Port Reset bit.

BR14

Bit 14: Port Reset bit.

BR15

Bit 15: Port Reset bit.

GPIOF

0x50001400: General-purpose I/Os

161/177 fields covered. Toggle Registers

Show register map

MODER

GPIO port mode register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL7
rw 		AFSEL6
rw 		AFSEL5
rw 		AFSEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL3
rw 		AFSEL2
rw 		AFSEL1
rw 		AFSEL0
rw
Toggle Fields

AFSEL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFSEL15
rw 		AFSEL14
rw 		AFSEL13
rw 		AFSEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFSEL11
rw 		AFSEL10
rw 		AFSEL9
rw 		AFSEL8
rw
Toggle Fields

AFSEL8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

AFSEL15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7

BRR

port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
Toggle Fields

BR0

Bit 0: Port Reset bit.

BR1

Bit 1: Port Reset bit.

BR2

Bit 2: Port Reset bit.

BR3

Bit 3: Port Reset bit.

BR4

Bit 4: Port Reset bit.

BR5

Bit 5: Port Reset bit.

BR6

Bit 6: Port Reset bit.

BR7

Bit 7: Port Reset bit.

BR8

Bit 8: Port Reset bit.

BR9

Bit 9: Port Reset bit.

BR10

Bit 10: Port Reset bit.

BR11

Bit 11: Port Reset bit.

BR12

Bit 12: Port Reset bit.

BR13

Bit 13: Port Reset bit.

BR14

Bit 14: Port Reset bit.

BR15

Bit 15: Port Reset bit.

I2C1

0x40005400: Inter-integrated circuit

76/76 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 OAR1
0xc OAR2
0x10 TIMINGR
0x14 TIMEOUTR
0x18 ISR
0x1c ICR
0x20 PECR
0x24 RXDR
0x28 TXDR

CR1

Control register 1

Offset: 0x0, reset: 0x00000000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PECEN
rw 		ALERTEN
rw 		SMBDEN
rw 		SMBHEN
rw 		GCEN
rw 		WUPEN
rw 		NOSTRETCH
rw 		SBC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXDMAEN
rw 		TXDMAEN
rw 		ANFOFF
rw 		DNF
rw 		ERRIE
rw 		TCIE
rw 		STOPIE
rw 		NACKIE
rw 		ADDRIE
rw 		RXIE
rw 		TXIE
rw 		PE
rw
Toggle Fields

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, reset: 0x00000000, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PECBYTE
rw 		AUTOEND
rw 		RELOAD
rw 		NBYTES
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NACK
rw 		STOP
rw 		START
rw 		HEAD10R
rw 		ADD10
rw 		RD_WRN
rw 		SADD
rw
Toggle Fields

SADD

Bits 0-9: Slave address bit (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA1EN
rw 		OA1MODE
rw 		OA1
rw
Toggle Fields

OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA2EN
rw 		OA2MSK
rw 		OA2
rw
Toggle Fields

OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRESC
rw 		SCLDEL
rw 		SDADEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SCLH
rw 		SCLL
rw
Toggle Fields

SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TEXTEN
rw 		TIMEOUTB
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIMOUTEN
rw 		TIDLE
rw 		TIMEOUTA
rw
Toggle Fields

TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, reset: 0x00000001, access: Unspecified

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDCODE
r 		DIR
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BUSY
r 		ALERT
r 		TIMEOUT
r 		PECERR
r 		OVR
r 		ARLO
r 		BERR
r 		TCR
r 		TC
r 		STOPF
r 		NACKF
r 		ADDR
r 		RXNE
r 		TXIS
rw 		TXE
rw
Toggle Fields

TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

TC

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, reset: 0x00000000, access: write-only

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ALERTCF
w 		TIMOUTCF
w 		PECCF
w 		OVRCF
w 		ARLOCF
w 		BERRCF
w 		STOPCF
w 		NACKCF
w 		ADDRCF
w
Toggle Fields

ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PEC
r
Toggle Fields

PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXDATA
r
Toggle Fields

RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXDATA
rw
Toggle Fields

TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

I2C2

0x40005800: Inter-integrated circuit

76/76 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 OAR1
0xc OAR2
0x10 TIMINGR
0x14 TIMEOUTR
0x18 ISR
0x1c ICR
0x20 PECR
0x24 RXDR
0x28 TXDR

CR1

Control register 1

Offset: 0x0, reset: 0x00000000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PECEN
rw 		ALERTEN
rw 		SMBDEN
rw 		SMBHEN
rw 		GCEN
rw 		WUPEN
rw 		NOSTRETCH
rw 		SBC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXDMAEN
rw 		TXDMAEN
rw 		ANFOFF
rw 		DNF
rw 		ERRIE
rw 		TCIE
rw 		STOPIE
rw 		NACKIE
rw 		ADDRIE
rw 		RXIE
rw 		TXIE
rw 		PE
rw
Toggle Fields

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, reset: 0x00000000, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PECBYTE
rw 		AUTOEND
rw 		RELOAD
rw 		NBYTES
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NACK
rw 		STOP
rw 		START
rw 		HEAD10R
rw 		ADD10
rw 		RD_WRN
rw 		SADD
rw
Toggle Fields

SADD

Bits 0-9: Slave address bit (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA1EN
rw 		OA1MODE
rw 		OA1
rw
Toggle Fields

OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA2EN
rw 		OA2MSK
rw 		OA2
rw
Toggle Fields

OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRESC
rw 		SCLDEL
rw 		SDADEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SCLH
rw 		SCLL
rw
Toggle Fields

SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TEXTEN
rw 		TIMEOUTB
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIMOUTEN
rw 		TIDLE
rw 		TIMEOUTA
rw
Toggle Fields

TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, reset: 0x00000001, access: Unspecified

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDCODE
r 		DIR
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BUSY
r 		ALERT
r 		TIMEOUT
r 		PECERR
r 		OVR
r 		ARLO
r 		BERR
r 		TCR
r 		TC
r 		STOPF
r 		NACKF
r 		ADDR
r 		RXNE
r 		TXIS
rw 		TXE
rw
Toggle Fields

TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

TC

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, reset: 0x00000000, access: write-only

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ALERTCF
w 		TIMOUTCF
w 		PECCF
w 		OVRCF
w 		ARLOCF
w 		BERRCF
w 		STOPCF
w 		NACKCF
w 		ADDRCF
w
Toggle Fields

ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PEC
r
Toggle Fields

PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXDATA
r
Toggle Fields

RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXDATA
rw
Toggle Fields

TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

IWDG

0x40003000: Independent watchdog

7/7 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 KR
0x4 PR
0x8 RLR
0xc SR
0x10 WINR

KR

Key register

Offset: 0x0, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields

KEY

Bits 0-15: Key value (write only, read 0x0000).

Allowed values:
21845: Enable: Enable access to PR, RLR and WINR registers (0x5555)
43690: Reset: Reset the watchdog value (0xAAAA)
52428: Start: Start the watchdog (0xCCCC)

PR

Prescaler register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PR
rw
Toggle Fields

PR

Bits 0-2: Prescaler divider.

Allowed values:
0: DivideBy4: Divider /4
1: DivideBy8: Divider /8
2: DivideBy16: Divider /16
3: DivideBy32: Divider /32
4: DivideBy64: Divider /64
5: DivideBy128: Divider /128
6: DivideBy256: Divider /256
7: DivideBy256bis: Divider /256

RLR

Reload register

Offset: 0x8, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RL
rw
Toggle Fields

RL

Bits 0-11: Watchdog counter reload value.

Allowed values: 0x0-0xfff

SR

Status register

Offset: 0xc, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WVU
r 		RVU
r 		PVU
r
Toggle Fields

PVU

Bit 0: Watchdog prescaler value update.

RVU

Bit 1: Watchdog counter reload value update.

WVU

Bit 2: Watchdog counter window value update.

WINR

Window register

Offset: 0x10, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WIN
rw
Toggle Fields

WIN

Bits 0-11: Watchdog counter window value.

Allowed values: 0x0-0xfff

LPTIM1

0x40007c00: Low power timer

8/44 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ISR
0x4 ICR
0x8 IER
0xc CFGR
0x10 CR
0x14 CMP
0x18 ARR
0x1c CNT
0x24 CFGR2

ISR

Interrupt and Status Register

Offset: 0x0, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWN
r 		UP
r 		ARROK
r 		CMPOK
r 		EXTTRIG
r 		ARRM
r 		CMPM
r
Toggle Fields

CMPM

Bit 0: Compare match.

ARRM

Bit 1: Autoreload match.

EXTTRIG

Bit 2: External trigger edge event.

CMPOK

Bit 3: Compare register update OK.

ARROK

Bit 4: Autoreload register update OK.

UP

Bit 5: Counter direction change down to up.

DOWN

Bit 6: Counter direction change up to down.

ICR

Interrupt Clear Register

Offset: 0x4, reset: 0x00000000, access: write-only

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWNCF
w 		UPCF
w 		ARROKCF
w 		CMPOKCF
w 		EXTTRIGCF
w 		ARRMCF
w 		CMPMCF
w
Toggle Fields

CMPMCF

Bit 0: compare match Clear Flag.

ARRMCF

Bit 1: Autoreload match Clear Flag.

EXTTRIGCF

Bit 2: External trigger valid edge Clear Flag.

CMPOKCF

Bit 3: Compare register update OK Clear Flag.

ARROKCF

Bit 4: Autoreload register update OK Clear Flag.

UPCF

Bit 5: Direction change to UP Clear Flag.

DOWNCF

Bit 6: Direction change to down Clear Flag.

IER

Interrupt Enable Register

Offset: 0x8, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWNIE
rw 		UPIE
rw 		ARROKIE
rw 		CMPOKIE
rw 		EXTTRIGIE
rw 		ARRMIE
rw 		CMPMIE
rw
Toggle Fields

CMPMIE

Bit 0: Compare match Interrupt Enable.

ARRMIE

Bit 1: Autoreload match Interrupt Enable.

EXTTRIGIE

Bit 2: External trigger valid edge Interrupt Enable.

CMPOKIE

Bit 3: Compare register update OK Interrupt Enable.

ARROKIE

Bit 4: Autoreload register update OK Interrupt Enable.

UPIE

Bit 5: Direction change to UP Interrupt Enable.

DOWNIE

Bit 6: Direction change to down Interrupt Enable.

CFGR

Configuration Register

Offset: 0xc, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ENC
rw 		COUNTMODE
rw 		PRELOAD
rw 		WAVPOL
rw 		WAVE
rw 		TIMOUT
rw 		TRIGEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRIGSEL
rw 		PRESC
rw 		TRGFLT
rw 		CKFLT
rw 		CKPOL
rw 		CKSEL
rw
Toggle Fields

CKSEL

Bit 0: Clock selector.

CKPOL

Bits 1-2: Clock Polarity.

CKFLT

Bits 3-4: Configurable digital filter for external clock.

TRGFLT

Bits 6-7: Configurable digital filter for trigger.

PRESC

Bits 9-11: Clock prescaler.

TRIGSEL

Bits 13-15: Trigger selector.

TRIGEN

Bits 17-18: Trigger enable and polarity.

TIMOUT

Bit 19: Timeout enable.

WAVE

Bit 20: Waveform shape.

WAVPOL

Bit 21: Waveform shape polarity.

PRELOAD

Bit 22: Registers update mode.

COUNTMODE

Bit 23: counter mode enabled.

ENC

Bit 24: Encoder mode enable.

CR

Control Register

Offset: 0x10, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSTARE
rw 		COUNTRST
rw 		CNTSTRT
rw 		SNGSTRT
rw 		ENABLE
rw
Toggle Fields

ENABLE

Bit 0: LPTIM Enable.

SNGSTRT

Bit 1: LPTIM start in single mode.

CNTSTRT

Bit 2: Timer start in continuous mode.

COUNTRST

Bit 3: Counter reset.

RSTARE

Bit 4: Reset after read enable.

CMP

Compare Register

Offset: 0x14, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMP
rw
Toggle Fields

CMP

Bits 0-15: Compare value.

ARR

Autoreload Register

Offset: 0x18, reset: 0x00000001, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Auto reload value.

CNT

Counter Register

Offset: 0x1c, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
r
Toggle Fields

CNT

Bits 0-15: Counter value.

CFGR2

LPTIM configuration register 2

Offset: 0x24, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IN2SEL
rw 		IN1SEL
rw
Toggle Fields

IN1SEL

Bits 0-1: LPTIMx Input 1 selection.

IN2SEL

Bits 4-5: LPTIM1 Input 2 selection.

LPTIM2

0x40009400: Low power timer

8/44 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ISR
0x4 ICR
0x8 IER
0xc CFGR
0x10 CR
0x14 CMP
0x18 ARR
0x1c CNT
0x24 CFGR2

ISR

Interrupt and Status Register

Offset: 0x0, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWN
r 		UP
r 		ARROK
r 		CMPOK
r 		EXTTRIG
r 		ARRM
r 		CMPM
r
Toggle Fields

CMPM

Bit 0: Compare match.

ARRM

Bit 1: Autoreload match.

EXTTRIG

Bit 2: External trigger edge event.

CMPOK

Bit 3: Compare register update OK.

ARROK

Bit 4: Autoreload register update OK.

UP

Bit 5: Counter direction change down to up.

DOWN

Bit 6: Counter direction change up to down.

ICR

Interrupt Clear Register

Offset: 0x4, reset: 0x00000000, access: write-only

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWNCF
w 		UPCF
w 		ARROKCF
w 		CMPOKCF
w 		EXTTRIGCF
w 		ARRMCF
w 		CMPMCF
w
Toggle Fields

CMPMCF

Bit 0: compare match Clear Flag.

ARRMCF

Bit 1: Autoreload match Clear Flag.

EXTTRIGCF

Bit 2: External trigger valid edge Clear Flag.

CMPOKCF

Bit 3: Compare register update OK Clear Flag.

ARROKCF

Bit 4: Autoreload register update OK Clear Flag.

UPCF

Bit 5: Direction change to UP Clear Flag.

DOWNCF

Bit 6: Direction change to down Clear Flag.

IER

Interrupt Enable Register

Offset: 0x8, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOWNIE
rw 		UPIE
rw 		ARROKIE
rw 		CMPOKIE
rw 		EXTTRIGIE
rw 		ARRMIE
rw 		CMPMIE
rw
Toggle Fields

CMPMIE

Bit 0: Compare match Interrupt Enable.

ARRMIE

Bit 1: Autoreload match Interrupt Enable.

EXTTRIGIE

Bit 2: External trigger valid edge Interrupt Enable.

CMPOKIE

Bit 3: Compare register update OK Interrupt Enable.

ARROKIE

Bit 4: Autoreload register update OK Interrupt Enable.

UPIE

Bit 5: Direction change to UP Interrupt Enable.

DOWNIE

Bit 6: Direction change to down Interrupt Enable.

CFGR

Configuration Register

Offset: 0xc, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ENC
rw 		COUNTMODE
rw 		PRELOAD
rw 		WAVPOL
rw 		WAVE
rw 		TIMOUT
rw 		TRIGEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRIGSEL
rw 		PRESC
rw 		TRGFLT
rw 		CKFLT
rw 		CKPOL
rw 		CKSEL
rw
Toggle Fields

CKSEL

Bit 0: Clock selector.

CKPOL

Bits 1-2: Clock Polarity.

CKFLT

Bits 3-4: Configurable digital filter for external clock.

TRGFLT

Bits 6-7: Configurable digital filter for trigger.

PRESC

Bits 9-11: Clock prescaler.

TRIGSEL

Bits 13-15: Trigger selector.

TRIGEN

Bits 17-18: Trigger enable and polarity.

TIMOUT

Bit 19: Timeout enable.

WAVE

Bit 20: Waveform shape.

WAVPOL

Bit 21: Waveform shape polarity.

PRELOAD

Bit 22: Registers update mode.

COUNTMODE

Bit 23: counter mode enabled.

ENC

Bit 24: Encoder mode enable.

CR

Control Register

Offset: 0x10, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSTARE
rw 		COUNTRST
rw 		CNTSTRT
rw 		SNGSTRT
rw 		ENABLE
rw
Toggle Fields

ENABLE

Bit 0: LPTIM Enable.

SNGSTRT

Bit 1: LPTIM start in single mode.

CNTSTRT

Bit 2: Timer start in continuous mode.

COUNTRST

Bit 3: Counter reset.

RSTARE

Bit 4: Reset after read enable.

CMP

Compare Register

Offset: 0x14, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMP
rw
Toggle Fields

CMP

Bits 0-15: Compare value.

ARR

Autoreload Register

Offset: 0x18, reset: 0x00000001, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Auto reload value.

CNT

Counter Register

Offset: 0x1c, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
r
Toggle Fields

CNT

Bits 0-15: Counter value.

CFGR2

LPTIM configuration register 2

Offset: 0x24, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IN2SEL
rw 		IN1SEL
rw
Toggle Fields

IN1SEL

Bits 0-1: LPTIMx Input 1 selection.

IN2SEL

Bits 4-5: LPTIM1 Input 2 selection.

LPUART

0x40008000: Universal synchronous asynchronous receiver transmitter

22/86 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 CR3
0xc BRR
0x18 RQR
0x1c ISR
0x20 ICR
0x24 RDR
0x28 TDR
0x2c PRESC

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

0/21 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXFFIE
rw 		TXFEIE
rw 		FIFOEN
rw 		M1
rw 		DEAT
rw 		DEDT0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMIE
rw 		MME
rw 		M0
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		UESM
rw 		UE
rw
Toggle Fields

UE

Bit 0: USART enable.

UESM

Bit 1: USART enable in Stop mode.

RE

Bit 2: Receiver enable.

TE

Bit 3: Transmitter enable.

IDLEIE

Bit 4: IDLE interrupt enable.

RXNEIE

Bit 5: RXNE interrupt enable.

TCIE

Bit 6: Transmission complete interrupt enable.

TXEIE

Bit 7: interrupt enable.

PEIE

Bit 8: PE interrupt enable.

PS

Bit 9: Parity selection.

PCE

Bit 10: Parity control enable.

WAKE

Bit 11: Receiver wakeup method.

M0

Bit 12: Word length.

MME

Bit 13: Mute mode enable.

CMIE

Bit 14: Character match interrupt enable.

DEDT0

Bits 16-20: DEDT0.

DEAT

Bits 21-25: DEAT0.

M1

Bit 28: Word length.

FIFOEN

Bit 29: FIFO mode enable.

TXFEIE

Bit 30: TXFIFO empty interrupt enable.

RXFFIE

Bit 31: RXFIFO Full interrupt enable.

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADD4_7
rw 		ADD0_3
rw 		MSBFIRST
rw 		TAINV
rw 		TXINV
rw 		RXINV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWAP
rw 		STOP
rw 		ADDM7
rw
Toggle Fields

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

STOP

Bits 12-13: STOP bits.

SWAP

Bit 15: Swap TX/RX pins.

RXINV

Bit 16: RX pin active level inversion.

TXINV

Bit 17: TX pin active level inversion.

TAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

ADD0_3

Bits 24-27: Address of the USART node.

ADD4_7

Bits 28-31: Address of the USART node.

CR3

Control register 3

Offset: 0x8, reset: 0x0000, access: read-write

0/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFTCFG
rw 		RXFTIE
rw 		RXFTCFG
rw 		TXFTIE
rw 		WUFIE
rw 		WUS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEP
rw 		DEM
rw 		DDRE
rw 		OVRDIS
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		HDSEL
rw 		EIE
rw
Toggle Fields

EIE

Bit 0: Error interrupt enable.

HDSEL

Bit 3: Half-duplex selection.

DMAR

Bit 6: DMA enable receiver.

DMAT

Bit 7: DMA enable transmitter.

RTSE

Bit 8: RTS enable.

CTSE

Bit 9: CTS enable.

CTSIE

Bit 10: CTS interrupt enable.

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

DEM

Bit 14: Driver enable mode.

DEP

Bit 15: Driver enable polarity selection.

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

TXFTIE

Bit 23: threshold interrupt enable.

RXFTCFG

Bits 25-27: Receive FIFO threshold configuration.

RXFTIE

Bit 28: RXFIFO threshold interrupt enable.

TXFTCFG

Bits 29-31: TXFIFO threshold configuration.

BRR

Baud rate register

Offset: 0xc, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BRR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRR
rw
Toggle Fields

BRR

Bits 0-19: BRR.

RQR

Request register

Offset: 0x18, reset: 0x0000, access: write-only

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFRQ
w 		RXFRQ
w 		MMRQ
w 		SBKRQ
w 		ABRRQ
w
Toggle Fields

ABRRQ

Bit 0: Auto baud rate request.

SBKRQ

Bit 1: Send break request.

MMRQ

Bit 2: Mute mode request.

RXFRQ

Bit 3: Receive data flush request.

TXFRQ

Bit 4: Transmit data flush request.

ISR

Interrupt & status register

Offset: 0x1c, reset: 0x00C0, access: read-only

21/21 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFT
r 		RXFT
r 		RXFF
r 		TXFE
r 		REACK
r 		TEACK
r 		WUF
r 		RWU
r 		SBKF
r 		CMF
r 		BUSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTS
r 		CTSIF
r 		TXE
r 		TC
r 		RXNE
r 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

TXFE

Bit 23: TXFIFO Empty.

RXFF

Bit 24: RXFIFO Full.

RXFT

Bit 26: RXFIFO threshold flag.

TXFT

Bit 27: TXFIFO threshold flag.

ICR

Interrupt flag clear register

Offset: 0x20, reset: 0x0000, access: write-only

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUCF
w 		CMCF
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTSCF
w 		TCCF
w 		IDLECF
w 		ORECF
w 		NCF
w 		FECF
w 		PECF
w
Toggle Fields

PECF

Bit 0: Parity error clear flag.

FECF

Bit 1: Framing error clear flag.

NCF

Bit 2: Noise detected clear flag.

ORECF

Bit 3: Overrun error clear flag.

IDLECF

Bit 4: Idle line detected clear flag.

TCCF

Bit 6: Transmission complete clear flag.

CTSCF

Bit 9: CTS clear flag.

CMCF

Bit 17: Character match clear flag.

WUCF

Bit 20: Wakeup from Stop mode clear flag.

RDR

Receive data register

Offset: 0x24, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDR
r
Toggle Fields

RDR

Bits 0-8: Receive data value.

TDR

Transmit data register

Offset: 0x28, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDR
rw
Toggle Fields

TDR

Bits 0-8: Transmit data value.

PRESC

Prescaler register

Offset: 0x2c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRESCALER
rw
Toggle Fields

PRESCALER

Bits 0-3: Clock prescaler.

MPU

0xe000ed90: Memory protection unit

6/19 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 TYPER
0x4 CTRL
0x8 RNR
0xc RBAR
0x10 RASR

TYPER

MPU type register

Offset: 0x0, reset: 0X00000800, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IREGION
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DREGION
r 		SEPARATE
r
Toggle Fields

SEPARATE

Bit 0: Separate flag.

DREGION

Bits 8-15: Number of MPU data regions.

IREGION

Bits 16-23: Number of MPU instruction regions.

CTRL

MPU control register

Offset: 0x4, reset: 0X00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRIVDEFENA
r 		HFNMIENA
r 		ENABLE
r
Toggle Fields

ENABLE

Bit 0: Enables the MPU.

HFNMIENA

Bit 1: Enables the operation of MPU during hard fault.

PRIVDEFENA

Bit 2: Enable priviliged software access to default memory map.

RNR

MPU region number register

Offset: 0x8, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REGION
rw
Toggle Fields

REGION

Bits 0-7: MPU region.

RBAR

MPU region base address register

Offset: 0xc, reset: 0X00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDR
rw 		VALID
rw 		REGION
rw
Toggle Fields

REGION

Bits 0-3: MPU region field.

VALID

Bit 4: MPU region number valid.

ADDR

Bits 5-31: Region base address field.

RASR

MPU region attribute and size register

Offset: 0x10, reset: 0X00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
XN
rw 		AP
rw 		TEX
rw 		S
rw 		C
rw 		B
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRD
rw 		SIZE
rw 		ENABLE
rw
Toggle Fields

ENABLE

Bit 0: Region enable bit..

SIZE

Bits 1-5: Size of the MPU protection region.

SRD

Bits 8-15: Subregion disable bits.

B

Bit 16: memory attribute.

C

Bit 17: memory attribute.

S

Bit 18: Shareable memory attribute.

TEX

Bits 19-21: memory attribute.

AP

Bits 24-26: Access permission.

XN

Bit 28: Instruction access disable bit.

NVIC

0xe000e100: Nested Vectored Interrupt Controller

0/37 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ISER
0x80 ICER
0x100 ISPR
0x180 ICPR
0x300 IPR0
0x304 IPR1
0x308 IPR2
0x30c IPR3
0x310 IPR4
0x314 IPR5
0x318 IPR6
0x31c IPR7
0x320 IPR8

ISER

Interrupt Set Enable Register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETENA
rw
Toggle Fields

SETENA

Bits 0-31: SETENA.

ICER

Interrupt Clear Enable Register

Offset: 0x80, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRENA
rw
Toggle Fields

CLRENA

Bits 0-31: CLRENA.

ISPR

Interrupt Set-Pending Register

Offset: 0x100, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETPEND
rw
Toggle Fields

SETPEND

Bits 0-31: SETPEND.

ICPR

Interrupt Clear-Pending Register

Offset: 0x180, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRPEND
rw
Toggle Fields

CLRPEND

Bits 0-31: CLRPEND.

IPR0

Interrupt Priority Register 0

Offset: 0x300, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_3
rw 		PRI_2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_1
rw 		PRI_0
rw
Toggle Fields

PRI_0

Bits 0-7: priority for interrupt 0.

PRI_1

Bits 8-15: priority for interrupt 1.

PRI_2

Bits 16-23: priority for interrupt 2.

PRI_3

Bits 24-31: priority for interrupt 3.

IPR1

Interrupt Priority Register 1

Offset: 0x304, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_7
rw 		PRI_6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_5
rw 		PRI_4
rw
Toggle Fields

PRI_4

Bits 0-7: priority for interrupt n.

PRI_5

Bits 8-15: priority for interrupt n.

PRI_6

Bits 16-23: priority for interrupt n.

PRI_7

Bits 24-31: priority for interrupt n.

IPR2

Interrupt Priority Register 2

Offset: 0x308, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_11
rw 		PRI_10
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_9
rw 		PRI_8
rw
Toggle Fields

PRI_8

Bits 0-7: priority for interrupt n.

PRI_9

Bits 8-15: priority for interrupt n.

PRI_10

Bits 16-23: priority for interrupt n.

PRI_11

Bits 24-31: priority for interrupt n.

IPR3

Interrupt Priority Register 3

Offset: 0x30c, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_15
rw 		PRI_14
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_13
rw 		PRI_12
rw
Toggle Fields

PRI_12

Bits 0-7: priority for interrupt n.

PRI_13

Bits 8-15: priority for interrupt n.

PRI_14

Bits 16-23: priority for interrupt n.

PRI_15

Bits 24-31: priority for interrupt n.

IPR4

Interrupt Priority Register 4

Offset: 0x310, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_19
rw 		PRI_18
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_17
rw 		PRI_16
rw
Toggle Fields

PRI_16

Bits 0-7: priority for interrupt n.

PRI_17

Bits 8-15: priority for interrupt n.

PRI_18

Bits 16-23: priority for interrupt n.

PRI_19

Bits 24-31: priority for interrupt n.

IPR5

Interrupt Priority Register 5

Offset: 0x314, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_23
rw 		PRI_22
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_21
rw 		PRI_20
rw
Toggle Fields

PRI_20

Bits 0-7: priority for interrupt n.

PRI_21

Bits 8-15: priority for interrupt n.

PRI_22

Bits 16-23: priority for interrupt n.

PRI_23

Bits 24-31: priority for interrupt n.

IPR6

Interrupt Priority Register 6

Offset: 0x318, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_27
rw 		PRI_26
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_25
rw 		PRI_24
rw
Toggle Fields

PRI_24

Bits 0-7: priority for interrupt n.

PRI_25

Bits 8-15: priority for interrupt n.

PRI_26

Bits 16-23: priority for interrupt n.

PRI_27

Bits 24-31: priority for interrupt n.

IPR7

Interrupt Priority Register 7

Offset: 0x31c, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_31
rw 		PRI_30
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_29
rw 		PRI_28
rw
Toggle Fields

PRI_28

Bits 0-7: priority for interrupt n.

PRI_29

Bits 8-15: priority for interrupt n.

PRI_30

Bits 16-23: priority for interrupt n.

PRI_31

Bits 24-31: priority for interrupt n.

IPR8

Interrupt Priority Register 8

Offset: 0x320, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields

NVIC_STIR

0xe000ef00: Nested vectored interrupt controller

0/1 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 STIR

STIR

Software trigger interrupt register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTID
rw
Toggle Fields

INTID

Bits 0-8: Software generated interrupt ID.

PWR

0x40007000: Power control

12/148 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 CR3
0xc CR4
0x10 SR1
0x14 SR2
0x18 SCR
0x20 PUCRA
0x24 PDCRA
0x28 PUCRB
0x2c PDCRB
0x30 PUCRC
0x34 PDCRC
0x38 PUCRD
0x3c PDCRD
0x48 PUCRF
0x4c PDCRF

CR1

Power control register 1

Offset: 0x0, reset: 0x00000200, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LPR
rw 		VOS
rw 		DBP
rw 		FPD_LPSLP
rw 		FPD_LPRUN
rw 		FPD_STOP
rw 		LPMS
rw
Toggle Fields

LPMS

Bits 0-2: Low-power mode selection.

FPD_STOP

Bit 3: Flash memory powered down during Stop mode.

FPD_LPRUN

Bit 4: Flash memory powered down during Low-power run mode.

FPD_LPSLP

Bit 5: Flash memory powered down during Low-power sleep mode.

DBP

Bit 8: Disable backup domain write protection.

VOS

Bits 9-10: Voltage scaling range selection.

LPR

Bit 14: Low-power run.

CR2

Power control register 2

Offset: 0x4, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PVDRT
rw 		PVDFT
rw 		PVDE
rw
Toggle Fields

PVDE

Bit 0: Power voltage detector enable.

PVDFT

Bits 1-3: Power voltage detector falling threshold selection.

PVDRT

Bits 4-6: Power voltage detector rising threshold selection.

CR3

Power control register 3

Offset: 0x8, reset: 0X00008000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EIWUL
rw 		APC
rw 		ULPEN
rw 		RRS
rw 		EWUP6
rw 		EWUP5
rw 		EWUP4
rw 		EWUP2
rw 		EWUP1
rw
Toggle Fields

EWUP1

Bit 0: Enable Wakeup pin WKUP1.

EWUP2

Bit 1: Enable Wakeup pin WKUP2.

EWUP4

Bit 3: Enable Wakeup pin WKUP4.

EWUP5

Bit 4: Enable WKUP5 wakeup pin.

EWUP6

Bit 5: Enable WKUP6 wakeup pin.

RRS

Bit 8: SRAM retention in Standby mode.

ULPEN

Bit 9: Enable the periodical sampling mode for PDR detection.

APC

Bit 10: Apply pull-up and pull-down configuration.

EIWUL

Bit 15: Enable internal wakeup line.

CR4

Power control register 4

Offset: 0xc, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VBRS
rw 		VBE
rw 		WP6
rw 		WP5
rw 		WP4
rw 		WP2
rw 		WP1
rw
Toggle Fields

WP1

Bit 0: Wakeup pin WKUP1 polarity.

WP2

Bit 1: Wakeup pin WKUP2 polarity.

WP4

Bit 3: Wakeup pin WKUP4 polarity.

WP5

Bit 4: Wakeup pin WKUP5 polarity.

WP6

Bit 5: WKUP6 wakeup pin polarity.

VBE

Bit 8: VBAT battery charging enable.

VBRS

Bit 9: VBAT battery charging resistor selection.

SR1

Power status register 1

Offset: 0x10, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WUFI
r 		SBF
r 		WUF6
r 		WUF5
r 		WUF4
r 		WUF2
r 		WUF1
r
Toggle Fields

WUF1

Bit 0: Wakeup flag 1.

WUF2

Bit 1: Wakeup flag 2.

WUF4

Bit 3: Wakeup flag 4.

WUF5

Bit 4: Wakeup flag 5.

WUF6

Bit 5: Wakeup flag 6.

SBF

Bit 8: Standby flag.

WUFI

Bit 15: Wakeup flag internal.

SR2

Power status register 2

Offset: 0x14, reset: 0x00000000, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PVDO
r 		VOSF
r 		REGLPF
r 		REGLPS
r 		FLASH_RDY
r
Toggle Fields

FLASH_RDY

Bit 7: Flash ready flag.

REGLPS

Bit 8: Low-power regulator started.

REGLPF

Bit 9: Low-power regulator flag.

VOSF

Bit 10: Voltage scaling flag.

PVDO

Bit 11: Power voltage detector output.

SCR

Power status clear register

Offset: 0x18, reset: 0x00000000, access: write-only

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CSBF
w 		CWUF6
w 		CWUF5
w 		CWUF4
w 		CWUF2
w 		CWUF1
w
Toggle Fields

CWUF1

Bit 0: Clear wakeup flag 1.

CWUF2

Bit 1: Clear wakeup flag 2.

CWUF4

Bit 3: Clear wakeup flag 4.

CWUF5

Bit 4: Clear wakeup flag 5.

CWUF6

Bit 5: Clear wakeup flag 6.

CSBF

Bit 8: Clear standby flag.

PUCRA

Power Port A pull-up control register

Offset: 0x20, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PU15
rw 		PU14
rw 		PU13
rw 		PU12
rw 		PU11
rw 		PU10
rw 		PU9
rw 		PU8
rw 		PU7
rw 		PU6
rw 		PU5
rw 		PU4
rw 		PU3
rw 		PU2
rw 		PU1
rw 		PU0
rw
Toggle Fields

PU0

Bit 0: Port A pull-up bit y (y=0..15).

PU1

Bit 1: Port A pull-up bit y (y=0..15).

PU2

Bit 2: Port A pull-up bit y (y=0..15).

PU3

Bit 3: Port A pull-up bit y (y=0..15).

PU4

Bit 4: Port A pull-up bit y (y=0..15).

PU5

Bit 5: Port A pull-up bit y (y=0..15).

PU6

Bit 6: Port A pull-up bit y (y=0..15).

PU7

Bit 7: Port A pull-up bit y (y=0..15).

PU8

Bit 8: Port A pull-up bit y (y=0..15).

PU9

Bit 9: Port A pull-up bit y (y=0..15).

PU10

Bit 10: Port A pull-up bit y (y=0..15).

PU11

Bit 11: Port A pull-up bit y (y=0..15).

PU12

Bit 12: Port A pull-up bit y (y=0..15).

PU13

Bit 13: Port A pull-up bit y (y=0..15).

PU14

Bit 14: Port A pull-up bit y (y=0..15).

PU15

Bit 15: Port A pull-up bit y (y=0..15).

PDCRA

Power Port A pull-down control register

Offset: 0x24, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD15
rw 		PD14
rw 		PD13
rw 		PD12
rw 		PD11
rw 		PD10
rw 		PD9
rw 		PD8
rw 		PD7
rw 		PD6
rw 		PD5
rw 		PD4
rw 		PD3
rw 		PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields

PD0

Bit 0: Port A pull-down bit y (y=0..15).

PD1

Bit 1: Port A pull-down bit y (y=0..15).

PD2

Bit 2: Port A pull-down bit y (y=0..15).

PD3

Bit 3: Port A pull-down bit y (y=0..15).

PD4

Bit 4: Port A pull-down bit y (y=0..15).

PD5

Bit 5: Port A pull-down bit y (y=0..15).

PD6

Bit 6: Port A pull-down bit y (y=0..15).

PD7

Bit 7: Port A pull-down bit y (y=0..15).

PD8

Bit 8: Port A pull-down bit y (y=0..15).

PD9

Bit 9: Port A pull-down bit y (y=0..15).

PD10

Bit 10: Port A pull-down bit y (y=0..15).

PD11

Bit 11: Port A pull-down bit y (y=0..15).

PD12

Bit 12: Port A pull-down bit y (y=0..15).

PD13

Bit 13: Port A pull-down bit y (y=0..15).

PD14

Bit 14: Port A pull-down bit y (y=0..15).

PD15

Bit 15: Port A pull-down bit y (y=0..15).

PUCRB

Power Port B pull-up control register

Offset: 0x28, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PU15
rw 		PU14
rw 		PU13
rw 		PU12
rw 		PU11
rw 		PU10
rw 		PU9
rw 		PU8
rw 		PU7
rw 		PU6
rw 		PU5
rw 		PU4
rw 		PU3
rw 		PU2
rw 		PU1
rw 		PU0
rw
Toggle Fields

PU0

Bit 0: Port B pull-up bit y (y=0..15).

PU1

Bit 1: Port B pull-up bit y (y=0..15).

PU2

Bit 2: Port B pull-up bit y (y=0..15).

PU3

Bit 3: Port B pull-up bit y (y=0..15).

PU4

Bit 4: Port B pull-up bit y (y=0..15).

PU5

Bit 5: Port B pull-up bit y (y=0..15).

PU6

Bit 6: Port B pull-up bit y (y=0..15).

PU7

Bit 7: Port B pull-up bit y (y=0..15).

PU8

Bit 8: Port B pull-up bit y (y=0..15).

PU9

Bit 9: Port B pull-up bit y (y=0..15).

PU10

Bit 10: Port B pull-up bit y (y=0..15).

PU11

Bit 11: Port B pull-up bit y (y=0..15).

PU12

Bit 12: Port B pull-up bit y (y=0..15).

PU13

Bit 13: Port B pull-up bit y (y=0..15).

PU14

Bit 14: Port B pull-up bit y (y=0..15).

PU15

Bit 15: Port B pull-up bit y (y=0..15).

PDCRB

Power Port B pull-down control register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD15
rw 		PD14
rw 		PD13
rw 		PD12
rw 		PD11
rw 		PD10
rw 		PD9
rw 		PD8
rw 		PD7
rw 		PD6
rw 		PD5
rw 		PD4
rw 		PD3
rw 		PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields

PD0

Bit 0: Port B pull-down bit y (y=0..15).

PD1

Bit 1: Port B pull-down bit y (y=0..15).

PD2

Bit 2: Port B pull-down bit y (y=0..15).

PD3

Bit 3: Port B pull-down bit y (y=0..15).

PD4

Bit 4: Port B pull-down bit y (y=0..15).

PD5

Bit 5: Port B pull-down bit y (y=0..15).

PD6

Bit 6: Port B pull-down bit y (y=0..15).

PD7

Bit 7: Port B pull-down bit y (y=0..15).

PD8

Bit 8: Port B pull-down bit y (y=0..15).

PD9

Bit 9: Port B pull-down bit y (y=0..15).

PD10

Bit 10: Port B pull-down bit y (y=0..15).

PD11

Bit 11: Port B pull-down bit y (y=0..15).

PD12

Bit 12: Port B pull-down bit y (y=0..15).

PD13

Bit 13: Port B pull-down bit y (y=0..15).

PD14

Bit 14: Port B pull-down bit y (y=0..15).

PD15

Bit 15: Port B pull-down bit y (y=0..15).

PUCRC

Power Port C pull-up control register

Offset: 0x30, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PU15
rw 		PU14
rw 		PU13
rw 		PU7
rw 		PU6
rw
Toggle Fields

PU6

Bit 6: Port C pull-up bit y (y=0..15).

PU7

Bit 7: Port C pull-up bit y (y=0..15).

PU13

Bit 13: Port C pull-up bit y (y=0..15).

PU14

Bit 14: Port C pull-up bit y (y=0..15).

PU15

Bit 15: Port C pull-up bit y (y=0..15).

PDCRC

Power Port C pull-down control register

Offset: 0x34, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD15
rw 		PD14
rw 		PD13
rw 		PD12
rw 		PD11
rw 		PD10
rw 		PD9
rw 		PD8
rw 		PD7
rw 		PD6
rw 		PD5
rw 		PD4
rw 		PD3
rw 		PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields

PD0

Bit 0: Port C pull-down bit y (y=0..15).

PD1

Bit 1: Port C pull-down bit y (y=0..15).

PD2

Bit 2: Port C pull-down bit y (y=0..15).

PD3

Bit 3: Port C pull-down bit y (y=0..15).

PD4

Bit 4: Port C pull-down bit y (y=0..15).

PD5

Bit 5: Port C pull-down bit y (y=0..15).

PD6

Bit 6: Port C pull-down bit y (y=0..15).

PD7

Bit 7: Port C pull-down bit y (y=0..15).

PD8

Bit 8: Port C pull-down bit y (y=0..15).

PD9

Bit 9: Port C pull-down bit y (y=0..15).

PD10

Bit 10: Port C pull-down bit y (y=0..15).

PD11

Bit 11: Port C pull-down bit y (y=0..15).

PD12

Bit 12: Port C pull-down bit y (y=0..15).

PD13

Bit 13: Port C pull-down bit y (y=0..15).

PD14

Bit 14: Port C pull-down bit y (y=0..15).

PD15

Bit 15: Port C pull-down bit y (y=0..15).

PUCRD

Power Port D pull-up control register

Offset: 0x38, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PU3
rw 		PU2
rw 		PU1
rw 		PU0
rw
Toggle Fields

PU0

Bit 0: Port D pull-up bit y (y=0..15).

PU1

Bit 1: Port D pull-up bit y (y=0..15).

PU2

Bit 2: Port D pull-up bit y (y=0..15).

PU3

Bit 3: Port D pull-up bit y (y=0..15).

PDCRD

Power Port D pull-down control register

Offset: 0x3c, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD9
rw 		PD8
rw 		PD6
rw 		PD5
rw 		PD4
rw 		PD3
rw 		PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields

PD0

Bit 0: Port D pull-down bit y (y=0..15).

PD1

Bit 1: Port D pull-down bit y (y=0..15).

PD2

Bit 2: Port D pull-down bit y (y=0..15).

PD3

Bit 3: Port D pull-down bit y (y=0..15).

PD4

Bit 4: Port D pull-down bit y (y=0..15).

PD5

Bit 5: Port D pull-down bit y (y=0..15).

PD6

Bit 6: Port D pull-down bit y (y=0..15).

PD8

Bit 8: Port D pull-down bit y (y=0..15).

PD9

Bit 9: Port D pull-down bit y (y=0..15).

PUCRF

Power Port F pull-up control register

Offset: 0x48, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PU2
rw 		PU1
rw 		PU0
rw
Toggle Fields

PU0

Bit 0: Port F pull-up bit y (y=0..15).

PU1

Bit 1: Port F pull-up bit y (y=0..15).

PU2

Bit 2: Port F pull-up bit y (y=0..15).

PDCRF

Power Port F pull-down control register

Offset: 0x4c, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields

PD0

Bit 0: Port F pull-down bit y (y=0..15).

PD1

Bit 1: Port F pull-down bit y (y=0..15).

PD2

Bit 2: Port F pull-down bit y (y=0..15).

RCC

0x40021000: Reset and clock control

10/169 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR
0x4 ICSCR
0x8 CFGR
0xc PLLSYSCFGR
0x18 CIER
0x1c CIFR
0x20 CICR
0x24 IOPRSTR
0x28 AHBRSTR
0x2c APBRSTR1
0x30 APBRSTR2
0x34 IOPENR
0x38 AHBENR
0x3c APBENR1
0x40 APBENR2
0x44 IOPSMENR
0x48 AHBSMENR
0x4c APBSMENR1
0x50 APBSMENR2
0x54 CCIPR
0x5c BDCR
0x60 CSR

CR

Clock control register

Offset: 0x0, reset: 0x00000063, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLRDY
rw 		PLLON
rw 		CSSON
rw 		HSEBYP
rw 		HSERDY
rw 		HSEON
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HSIDIV
rw 		HSIRDY
rw 		HSIKERON
rw 		HSION
rw
Toggle Fields

HSION

Bit 8: HSI16 clock enable.

HSIKERON

Bit 9: HSI16 always enable for peripheral kernels.

HSIRDY

Bit 10: HSI16 clock ready flag.

HSIDIV

Bits 11-13: HSI16 clock division factor.

HSEON

Bit 16: HSE clock enable.

HSERDY

Bit 17: HSE clock ready flag.

HSEBYP

Bit 18: HSE crystal oscillator bypass.

CSSON

Bit 19: Clock security system enable.

PLLON

Bit 24: PLL enable.

PLLRDY

Bit 25: PLL clock ready flag.

ICSCR

Internal clock sources calibration register

Offset: 0x4, reset: 0x10000000, access: Unspecified

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HSITRIM
rw 		HSICAL
r
Toggle Fields

HSICAL

Bits 0-7: HSI16 clock calibration.

HSITRIM

Bits 8-14: HSI16 clock trimming.

CFGR

Clock configuration register

Offset: 0x8, reset: 0x00000000, access: Unspecified

2/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MCOPRE
r 		MCOSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PPRE
rw 		HPRE
rw 		SWS
r 		SW
rw
Toggle Fields

SW

Bits 0-2: System clock switch.

SWS

Bits 3-5: System clock switch status.

HPRE

Bits 8-11: AHB prescaler.

PPRE

Bits 12-14: APB prescaler.

MCOSEL

Bits 24-26: Microcontroller clock output.

MCOPRE

Bits 28-30: Microcontroller clock output prescaler.

PLLSYSCFGR

PLL configuration register

Offset: 0xc, reset: 0x00001000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLR
rw 		PLLREN
rw 		PLLQ
rw 		PLLQEN
rw 		PLLP
rw 		PLLPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PLLN
rw 		PLLM
rw 		PLLSRC
rw
Toggle Fields

PLLSRC

Bits 0-1: PLL input clock source.

PLLM

Bits 4-6: Division factor M of the PLL input clock divider.

PLLN

Bits 8-14: PLL frequency multiplication factor N.

PLLPEN

Bit 16: PLLPCLK clock output enable.

PLLP

Bits 17-21: PLL VCO division factor P for PLLPCLK clock output.

PLLQEN

Bit 24: PLLQCLK clock output enable.

PLLQ

Bits 25-27: PLL VCO division factor Q for PLLQCLK clock output.

PLLREN

Bit 28: PLLRCLK clock output enable.

PLLR

Bits 29-31: PLL VCO division factor R for PLLRCLK clock output.

CIER

Clock interrupt enable register

Offset: 0x18, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PLLSYSRDYIE
rw 		HSERDYIE
rw 		HSIRDYIE
rw 		LSERDYIE
rw 		LSIRDYIE
rw
Toggle Fields

LSIRDYIE

Bit 0: LSI ready interrupt enable.

LSERDYIE

Bit 1: LSE ready interrupt enable.

HSIRDYIE

Bit 3: HSI ready interrupt enable.

HSERDYIE

Bit 4: HSE ready interrupt enable.

PLLSYSRDYIE

Bit 5: PLL ready interrupt enable.

CIFR

Clock interrupt flag register

Offset: 0x1c, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LSECSSF
r 		CSSF
r 		PLLSYSRDYF
r 		HSERDYF
r 		HSIRDYF
r 		LSERDYF
r 		LSIRDYF
r
Toggle Fields

LSIRDYF

Bit 0: LSI ready interrupt flag.

LSERDYF

Bit 1: LSE ready interrupt flag.

HSIRDYF

Bit 3: HSI ready interrupt flag.

HSERDYF

Bit 4: HSE ready interrupt flag.

PLLSYSRDYF

Bit 5: PLL ready interrupt flag.

CSSF

Bit 8: Clock security system interrupt flag.

LSECSSF

Bit 9: LSE Clock security system interrupt flag.

CICR

Clock interrupt clear register

Offset: 0x20, reset: 0x00000000, access: write-only

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LSECSSC
w 		CSSC
w 		PLLSYSRDYC
w 		HSERDYC
w 		HSIRDYC
w 		LSERDYC
w 		LSIRDYC
w
Toggle Fields

LSIRDYC

Bit 0: LSI ready interrupt clear.

LSERDYC

Bit 1: LSE ready interrupt clear.

HSIRDYC

Bit 3: HSI ready interrupt clear.

HSERDYC

Bit 4: HSE ready interrupt clear.

PLLSYSRDYC

Bit 5: PLL ready interrupt clear.

CSSC

Bit 8: Clock security system interrupt clear.

LSECSSC

Bit 9: LSE Clock security system interrupt clear.

IOPRSTR

GPIO reset register

Offset: 0x24, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOPFRST
rw 		IOPDRST
rw 		IOPCRST
rw 		IOPBRST
rw 		IOPARST
rw
Toggle Fields

IOPARST

Bit 0: I/O port A reset.

IOPBRST

Bit 1: I/O port B reset.

IOPCRST

Bit 2: I/O port C reset.

IOPDRST

Bit 3: I/O port D reset.

IOPFRST

Bit 5: I/O port F reset.

AHBRSTR

AHB peripheral reset register

Offset: 0x28, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RNGRST
rw 		AESRST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCRST
rw 		FLASHRST
rw 		DMARST
rw
Toggle Fields

DMARST

Bit 0: DMA1 reset.

FLASHRST

Bit 8: FLITF reset.

CRCRST

Bit 12: CRC reset.

AESRST

Bit 16: AES hardware accelerator reset.

RNGRST

Bit 18: Random number generator reset.

APBRSTR1

APB peripheral reset register 1

Offset: 0x2c, reset: 0x00000000, access: read-write

0/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPTIM1RST
rw 		LPTIM2RST
rw 		PWRRST
rw 		DBGRST
rw 		I2C2RST
rw 		I2C1RST
rw 		LPUART1RST
rw 		USART2RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2RST
rw 		TIM3RST
rw 		TIM2RST
rw
Toggle Fields

TIM2RST

Bit 0: TIM2 timer reset.

TIM3RST

Bit 1: TIM3 timer reset.

SPI2RST

Bit 14: SPI2 reset.

USART2RST

Bit 17: USART2 reset.

LPUART1RST

Bit 20: LPUART1 reset.

I2C1RST

Bit 21: I2C1 reset.

I2C2RST

Bit 22: I2C2 reset.

DBGRST

Bit 27: Debug support reset.

PWRRST

Bit 28: Power interface reset.

LPTIM2RST

Bit 30: Low Power Timer 2 reset.

LPTIM1RST

Bit 31: Low Power Timer 1 reset.

APBRSTR2

APB peripheral reset register 2

Offset: 0x30, reset: 0x00000000, access: read-write

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADCRST
rw 		TIM17RST
rw 		TIM16RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM14RST
rw 		USART1RST
rw 		SPI1RST
rw 		TIM1RST
rw 		SYSCFGRST
rw
Toggle Fields

SYSCFGRST

Bit 0: SYSCFG, COMP and VREFBUF reset.

TIM1RST

Bit 11: TIM1 timer reset.

SPI1RST

Bit 12: SPI1 reset.

USART1RST

Bit 14: USART1 reset.

TIM14RST

Bit 15: TIM14 timer reset.

TIM16RST

Bit 17: TIM16 timer reset.

TIM17RST

Bit 18: TIM17 timer reset.

ADCRST

Bit 20: ADC reset.

IOPENR

GPIO clock enable register

Offset: 0x34, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOPFEN
rw 		IOPDEN
rw 		IOPCEN
rw 		IOPBEN
rw 		IOPAEN
rw
Toggle Fields

IOPAEN

Bit 0: I/O port A clock enable.

IOPBEN

Bit 1: I/O port B clock enable.

IOPCEN

Bit 2: I/O port C clock enable.

IOPDEN

Bit 3: I/O port D clock enable.

IOPFEN

Bit 5: I/O port F clock enable.

AHBENR

AHB peripheral clock enable register

Offset: 0x38, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RNGEN
rw 		AESEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCEN
rw 		FLASHEN
rw 		DMAEN
rw
Toggle Fields

DMAEN

Bit 0: DMA clock enable.

FLASHEN

Bit 8: Flash memory interface clock enable.

CRCEN

Bit 12: CRC clock enable.

AESEN

Bit 16: AES hardware accelerator.

RNGEN

Bit 18: Random number generator clock enable.

APBENR1

APB peripheral clock enable register 1

Offset: 0x3c, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPTIM1EN
rw 		LPTIM2EN
rw 		PWREN
rw 		DBGEN
rw 		I2C2EN
rw 		I2C1EN
rw 		LPUART1EN
rw 		USART2EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2EN
rw 		WWDGEN
rw 		RTCAPBEN
rw 		TIM3EN
rw 		TIM2EN
rw
Toggle Fields

TIM2EN

Bit 0: TIM2 timer clock enable.

TIM3EN

Bit 1: TIM3 timer clock enable.

RTCAPBEN

Bit 10: RTC APB clock enable.

WWDGEN

Bit 11: WWDG clock enable.

SPI2EN

Bit 14: SPI2 clock enable.

USART2EN

Bit 17: USART2 clock enable.

LPUART1EN

Bit 20: LPUART1 clock enable.

I2C1EN

Bit 21: I2C1 clock enable.

I2C2EN

Bit 22: I2C2 clock enable.

DBGEN

Bit 27: Debug support clock enable.

PWREN

Bit 28: Power interface clock enable.

LPTIM2EN

Bit 30: LPTIM2 clock enable.

LPTIM1EN

Bit 31: LPTIM1 clock enable.

APBENR2

APB peripheral clock enable register 2

Offset: 0x40, reset: 0x00000000, access: read-write

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADCEN
rw 		TIM17EN
rw 		TIM16EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM14EN
rw 		USART1EN
rw 		SPI1EN
rw 		TIM1EN
rw 		SYSCFGEN
rw
Toggle Fields

SYSCFGEN

Bit 0: SYSCFG, COMP and VREFBUF clock enable.

TIM1EN

Bit 11: TIM1 timer clock enable.

SPI1EN

Bit 12: SPI1 clock enable.

USART1EN

Bit 14: USART1 clock enable.

TIM14EN

Bit 15: TIM14 timer clock enable.

TIM16EN

Bit 17: TIM16 timer clock enable.

TIM17EN

Bit 18: TIM16 timer clock enable.

ADCEN

Bit 20: ADC clock enable.

IOPSMENR

GPIO in Sleep mode clock enable register

Offset: 0x44, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOPFSMEN
rw 		IOPDSMEN
rw 		IOPCSMEN
rw 		IOPBSMEN
rw 		IOPASMEN
rw
Toggle Fields

IOPASMEN

Bit 0: I/O port A clock enable during Sleep mode.

IOPBSMEN

Bit 1: I/O port B clock enable during Sleep mode.

IOPCSMEN

Bit 2: I/O port C clock enable during Sleep mode.

IOPDSMEN

Bit 3: I/O port D clock enable during Sleep mode.

IOPFSMEN

Bit 5: I/O port F clock enable during Sleep mode.

AHBSMENR

AHB peripheral clock enable in Sleep mode register

Offset: 0x48, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RNGSMEN
rw 		AESSMEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCSMEN
rw 		SRAMSMEN
rw 		FLASHSMEN
rw 		DMASMEN
rw
Toggle Fields

DMASMEN

Bit 0: DMA clock enable during Sleep mode.

FLASHSMEN

Bit 8: Flash memory interface clock enable during Sleep mode.

SRAMSMEN

Bit 9: SRAM clock enable during Sleep mode.

CRCSMEN

Bit 12: CRC clock enable during Sleep mode.

AESSMEN

Bit 16: AES hardware accelerator clock enable during Sleep mode.

RNGSMEN

Bit 18: Random number generator clock enable during Sleep mode.

APBSMENR1

APB peripheral clock enable in Sleep mode register 1

Offset: 0x4c, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPTIM1SMEN
rw 		LPTIM2SMEN
rw 		PWRSMEN
rw 		DBGSMEN
rw 		I2C2SMEN
rw 		I2C1SMEN
rw 		LPUART1SMEN
rw 		USART2SMEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2SMEN
rw 		WWDGSMEN
rw 		RTCAPBSMEN
rw 		TIM3SMEN
rw 		TIM2SMEN
rw
Toggle Fields

TIM2SMEN

Bit 0: TIM2 timer clock enable during Sleep mode.

TIM3SMEN

Bit 1: TIM3 timer clock enable during Sleep mode.

RTCAPBSMEN

Bit 10: RTC APB clock enable during Sleep mode.

WWDGSMEN

Bit 11: WWDG clock enable during Sleep mode.

SPI2SMEN

Bit 14: SPI2 clock enable during Sleep mode.

USART2SMEN

Bit 17: USART2 clock enable during Sleep mode.

LPUART1SMEN

Bit 20: LPUART1 clock enable during Sleep mode.

I2C1SMEN

Bit 21: I2C1 clock enable during Sleep mode.

I2C2SMEN

Bit 22: I2C2 clock enable during Sleep mode.

DBGSMEN

Bit 27: Debug support clock enable during Sleep mode.

PWRSMEN

Bit 28: Power interface clock enable during Sleep mode.

LPTIM2SMEN

Bit 30: Low Power Timer 2 clock enable during Sleep mode.

LPTIM1SMEN

Bit 31: Low Power Timer 1 clock enable during Sleep mode.

APBSMENR2

APB peripheral clock enable in Sleep mode register 2

Offset: 0x50, reset: 0x00000000, access: read-write

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADCSMEN
rw 		TIM17SMEN
rw 		TIM16SMEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM14SMEN
rw 		USART1SMEN
rw 		SPI1SMEN
rw 		TIM1SMEN
rw 		SYSCFGSMEN
rw
Toggle Fields

SYSCFGSMEN

Bit 0: SYSCFG, COMP and VREFBUF clock enable during Sleep mode.

TIM1SMEN

Bit 11: TIM1 timer clock enable during Sleep mode.

SPI1SMEN

Bit 12: SPI1 clock enable during Sleep mode.

USART1SMEN

Bit 14: USART1 clock enable during Sleep mode.

TIM14SMEN

Bit 15: TIM14 timer clock enable during Sleep mode.

TIM16SMEN

Bit 17: TIM16 timer clock enable during Sleep mode.

TIM17SMEN

Bit 18: TIM16 timer clock enable during Sleep mode.

ADCSMEN

Bit 20: ADC clock enable during Sleep mode.

CCIPR

Peripherals independent clock configuration register

Offset: 0x54, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADCSEL
rw 		RNGDIV
rw 		RNGSEL
rw 		TIM1SEL
rw 		LPTIM2SEL
rw 		LPTIM1SEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2S2SEL
rw 		I2C1SEL
rw 		LPUART1SEL
rw 		USART1SEL
rw
Toggle Fields

USART1SEL

Bits 0-1: USART1 clock source selection.

LPUART1SEL

Bits 10-11: LPUART1 clock source selection.

I2C1SEL

Bits 12-13: I2C1 clock source selection.

I2S2SEL

Bits 14-15: I2S1 clock source selection.

LPTIM1SEL

Bits 18-19: LPTIM1 clock source selection.

LPTIM2SEL

Bits 20-21: LPTIM2 clock source selection.

TIM1SEL

Bit 22: TIM1 clock source selection.

RNGSEL

Bits 26-27: RNG clock source selection.

RNGDIV

Bits 28-29: Division factor of RNG clock divider.

ADCSEL

Bits 30-31: ADCs clock source selection.

BDCR

RTC domain control register

Offset: 0x5c, reset: 0x00000000, access: read-write

0/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LSCOSEL
rw 		LSCOEN
rw 		BDRST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTCEN
rw 		RTCSEL
rw 		LSECSSD
rw 		LSECSSON
rw 		LSEDRV
rw 		LSEBYP
rw 		LSERDY
rw 		LSEON
rw
Toggle Fields

LSEON

Bit 0: LSE oscillator enable.

LSERDY

Bit 1: LSE oscillator ready.

LSEBYP

Bit 2: LSE oscillator bypass.

LSEDRV

Bits 3-4: LSE oscillator drive capability.

LSECSSON

Bit 5: CSS on LSE enable.

LSECSSD

Bit 6: CSS on LSE failure Detection.

RTCSEL

Bits 8-9: RTC clock source selection.

RTCEN

Bit 15: RTC clock enable.

BDRST

Bit 16: RTC domain software reset.

LSCOEN

Bit 24: Low-speed clock output (LSCO) enable.

LSCOSEL

Bit 25: Low-speed clock output selection.

CSR

Control/status register

Offset: 0x60, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPWRRSTF
rw 		WWDGRSTF
rw 		IWDGRSTF
rw 		SFTRSTF
rw 		PWRRSTF
rw 		PINRSTF
rw 		OBLRSTF
rw 		RMVF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LSIRDY
rw 		LSION
rw
Toggle Fields

LSION

Bit 0: LSI oscillator enable.

LSIRDY

Bit 1: LSI oscillator ready.

RMVF

Bit 23: Remove reset flags.

OBLRSTF

Bit 25: Option byte loader reset flag.

PINRSTF

Bit 26: Pin reset flag.

PWRRSTF

Bit 27: BOR or POR/PDR flag.

SFTRSTF

Bit 28: Software reset flag.

IWDGRSTF

Bit 29: Independent window watchdog reset flag.

WWDGRSTF

Bit 30: Window watchdog reset flag.

LPWRRSTF

Bit 31: Low-power reset flag.

RNG

0x40025000: Random number generator

4/10 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR
0x4 SR
0x8 DR

CR

control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BYP
rw 		CED
rw 		IE
rw 		RNGEN
rw
Toggle Fields

RNGEN

Bit 2: Random number generator enable.

IE

Bit 3: Interrupt enable.

CED

Bit 5: Clock error detection.

BYP

Bit 6: Bypass mode enable.

SR

status register

Offset: 0x4, reset: 0x00000000, access: Unspecified

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEIS
rw 		CEIS
rw 		SECS
r 		CECS
r 		DRDY
r
Toggle Fields

DRDY

Bit 0: Data ready.

CECS

Bit 1: Clock error current status.

SECS

Bit 2: Seed error current status.

CEIS

Bit 5: Clock error interrupt status.

SEIS

Bit 6: Seed error interrupt status.

DR

data register

Offset: 0x8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RNDATA
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RNDATA
r
Toggle Fields

RNDATA

Bits 0-31: Random data.

RTC

0x40002800: Real-time clock

32/123 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 TR
0x4 DR
0x8 SSR
0xc ICSR
0x10 PRER
0x14 WUTR
0x18 CR
0x24 WPR
0x28 CALR
0x2c SHIFTR
0x30 TSTR
0x34 TSDR
0x38 TSSSR
0x40 ALRMAR
0x44 ALRMASSR
0x48 ALRMBR
0x4c ALRMBSSR
0x50 SR
0x54 MISR
0x5c SCR

TR

time register

Offset: 0x0, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
rw 		MNU
rw 		ST
rw 		SU
rw
Toggle Fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

DR

date register

Offset: 0x4, reset: 0x00002101, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
YT
rw 		YU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDU
rw 		MT
rw 		MU
rw 		DT
rw 		DU
rw
Toggle Fields

DU

Bits 0-3: Date units in BCD format.

DT

Bits 4-5: Date tens in BCD format.

MU

Bits 8-11: Month units in BCD format.

MT

Bit 12: Month tens in BCD format.

WDU

Bits 13-15: Week day units.

YU

Bits 16-19: Year units in BCD format.

YT

Bits 20-23: Year tens in BCD format.

SSR

sub second register

Offset: 0x8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
r
Toggle Fields

SS

Bits 0-15: Sub second value.

ICSR

initialization and status register

Offset: 0xc, reset: 0x00000007, access: Unspecified

6/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RECALPF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INIT
rw 		INITF
r 		RSF
rw 		INITS
r 		SHPF
rw 		WUTWF
r 		ALRBWF
r 		ALRAWF
r
Toggle Fields

ALRAWF

Bit 0: Alarm A write flag.

ALRBWF

Bit 1: Alarm B write flag.

WUTWF

Bit 2: Wakeup timer write flag.

SHPF

Bit 3: Shift operation pending.

INITS

Bit 4: Initialization status flag.

RSF

Bit 5: Registers synchronization flag.

INITF

Bit 6: Initialization flag.

INIT

Bit 7: Initialization mode.

RECALPF

Bit 16: Recalibration pending Flag.

PRER

prescaler register

Offset: 0x10, reset: 0x007F00FF, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PREDIV_A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PREDIV_S
rw
Toggle Fields

PREDIV_S

Bits 0-14: Synchronous prescaler factor.

PREDIV_A

Bits 16-22: Asynchronous prescaler factor.

WUTR

wakeup timer register

Offset: 0x14, reset: 0x0000FFFF, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WUT
rw
Toggle Fields

WUT

Bits 0-15: Wakeup auto-reload value bits.

CR

control register

Offset: 0x18, reset: 0x00000000, access: read-write

0/26 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OUT2EN
rw 		TAMPALRM_TYPE
rw 		TAMPALRM_PU
rw 		TAMPOE
rw 		TAMPTS
rw 		ITSE
rw 		COE
rw 		OSEL
rw 		POL
rw 		COSEL
rw 		BKP
rw 		SUB1H
rw 		ADD1H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSIE
rw 		WUTIE
rw 		ALRBIE
rw 		ALRAIE
rw 		TSE
rw 		WUTE
rw 		ALRBE
rw 		ALRAE
rw 		FMT
rw 		BYPSHAD
rw 		REFCKON
rw 		TSEDGE
rw 		WUCKSEL
rw
Toggle Fields

WUCKSEL

Bits 0-2: WUCKSEL.

TSEDGE

Bit 3: TSEDGE.

REFCKON

Bit 4: REFCKON.

BYPSHAD

Bit 5: BYPSHAD.

FMT

Bit 6: FMT.

ALRAE

Bit 8: ALRAE.

ALRBE

Bit 9: ALRBE.

WUTE

Bit 10: WUTE.

TSE

Bit 11: TSE.

ALRAIE

Bit 12: ALRAIE.

ALRBIE

Bit 13: ALRBIE.

WUTIE

Bit 14: WUTIE.

TSIE

Bit 15: TSIE.

ADD1H

Bit 16: ADD1H.

SUB1H

Bit 17: SUB1H.

BKP

Bit 18: BKP.

COSEL

Bit 19: COSEL.

POL

Bit 20: POL.

OSEL

Bits 21-22: OSEL.

COE

Bit 23: COE.

ITSE

Bit 24: ITSE.

TAMPTS

Bit 25: TAMPTS.

TAMPOE

Bit 26: TAMPOE.

TAMPALRM_PU

Bit 29: TAMPALRM_PU.

TAMPALRM_TYPE

Bit 30: TAMPALRM_TYPE.

OUT2EN

Bit 31: OUT2EN.

WPR

write protection register

Offset: 0x24, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields

KEY

Bits 0-7: Write protection key.

CALR

calibration register

Offset: 0x28, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CALP
rw 		CALW8
rw 		CALW16
rw 		CALM
rw
Toggle Fields

CALM

Bits 0-8: Calibration minus.

CALW16

Bit 13: Use a 16-second calibration cycle period.

CALW8

Bit 14: Use an 8-second calibration cycle period.

CALP

Bit 15: Increase frequency of RTC by 488.5 ppm.

SHIFTR

shift control register

Offset: 0x2c, reset: 0x00000000, access: write-only

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADD1S
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SUBFS
w
Toggle Fields

SUBFS

Bits 0-14: Subtract a fraction of a second.

ADD1S

Bit 31: Add one second.

TSTR

time stamp time register

Offset: 0x30, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
r 		HT
r 		HU
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
r 		MNU
r 		ST
r 		SU
r
Toggle Fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

TSDR

time stamp date register

Offset: 0x34, reset: 0x00000000, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDU
r 		MT
r 		MU
r 		DT
r 		DU
r
Toggle Fields

DU

Bits 0-3: Date units in BCD format.

DT

Bits 4-5: Date tens in BCD format.

MU

Bits 8-11: Month units in BCD format.

MT

Bit 12: Month tens in BCD format.

WDU

Bits 13-15: Week day units.

TSSSR

timestamp sub second register

Offset: 0x38, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
r
Toggle Fields

SS

Bits 0-15: Sub second value.

ALRMAR

alarm A register

Offset: 0x40, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSK4
rw 		WDSEL
rw 		DT
rw 		DU
rw 		MSK3
rw 		PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSK2
rw 		MNT
rw 		MNU
rw 		MSK1
rw 		ST
rw 		SU
rw
Toggle Fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MSK1

Bit 7: Alarm A seconds mask.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

MSK2

Bit 15: Alarm A minutes mask.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

MSK3

Bit 23: Alarm A hours mask.

DU

Bits 24-27: Date units or day in BCD format.

DT

Bits 28-29: Date tens in BCD format.

WDSEL

Bit 30: Week day selection.

MSK4

Bit 31: Alarm A date mask.

ALRMASSR

alarm A sub second register

Offset: 0x44, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MASKSS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
rw
Toggle Fields

SS

Bits 0-14: Sub seconds value.

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

ALRMBR

alarm B register

Offset: 0x48, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSK4
rw 		WDSEL
rw 		DT
rw 		DU
rw 		MSK3
rw 		PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSK2
rw 		MNT
rw 		MNU
rw 		MSK1
rw 		ST
rw 		SU
rw
Toggle Fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MSK1

Bit 7: Alarm B seconds mask.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

MSK2

Bit 15: Alarm B minutes mask.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

MSK3

Bit 23: Alarm B hours mask.

DU

Bits 24-27: Date units or day in BCD format.

DT

Bits 28-29: Date tens in BCD format.

WDSEL

Bit 30: Week day selection.

MSK4

Bit 31: Alarm B date mask.

ALRMBSSR

alarm B sub second register

Offset: 0x4c, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MASKSS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
rw
Toggle Fields

SS

Bits 0-14: Sub seconds value.

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

SR

status register

Offset: 0x50, reset: 0x00000000, access: read-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ITSF
r 		TSOVF
r 		TSF
r 		WUTF
r 		ALRBF
r 		ALRAF
r
Toggle Fields

ALRAF

Bit 0: ALRAF.

ALRBF

Bit 1: ALRBF.

WUTF

Bit 2: WUTF.

TSF

Bit 3: TSF.

TSOVF

Bit 4: TSOVF.

ITSF

Bit 5: ITSF.

MISR

masked interrupt status register

Offset: 0x54, reset: 0x00000000, access: read-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ITSMF
r 		TSOVMF
r 		TSMF
r 		WUTMF
r 		ALRBMF
r 		ALRAMF
r
Toggle Fields

ALRAMF

Bit 0: ALRAMF.

ALRBMF

Bit 1: ALRBMF.

WUTMF

Bit 2: WUTMF.

TSMF

Bit 3: TSMF.

TSOVMF

Bit 4: TSOVMF.

ITSMF

Bit 5: ITSMF.

SCR

status clear register

Offset: 0x5c, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CITSF
rw 		CTSOVF
rw 		CTSF
rw 		CWUTF
rw 		CALRBF
rw 		CALRAF
rw
Toggle Fields

CALRAF

Bit 0: CALRAF.

CALRBF

Bit 1: CALRBF.

CWUTF

Bit 2: CWUTF.

CTSF

Bit 3: CTSF.

CTSOVF

Bit 4: CTSOVF.

CITSF

Bit 5: CITSF.

SCB

0xe000ed00: System control block

5/31 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CPUID
0x4 ICSR
0x8 VTOR
0xc AIRCR
0x10 SCR
0x14 CCR
0x1c SHPR2
0x20 SHPR3

CPUID

CPUID base register

Offset: 0x0, reset: 0x410FC241, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Implementer
r 		Variant
r 		Architecture
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PartNo
r 		Revision
r
Toggle Fields

Revision

Bits 0-3: Revision number.

PartNo

Bits 4-15: Part number of the processor.

Architecture

Bits 16-19: Reads as 0xF.

Variant

Bits 20-23: Variant number.

Implementer

Bits 24-31: Implementer code.

ICSR

Interrupt control and state register

Offset: 0x4, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NMIPENDSET
rw 		PENDSVSET
rw 		PENDSVCLR
rw 		PENDSTSET
rw 		PENDSTCLR
rw 		ISRPENDING
rw 		VECTPENDING
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VECTPENDING
rw 		RETTOBASE
rw 		VECTACTIVE
rw
Toggle Fields

VECTACTIVE

Bits 0-8: Active vector.

RETTOBASE

Bit 11: Return to base level.

VECTPENDING

Bits 12-18: Pending vector.

ISRPENDING

Bit 22: Interrupt pending flag.

PENDSTCLR

Bit 25: SysTick exception clear-pending bit.

PENDSTSET

Bit 26: SysTick exception set-pending bit.

PENDSVCLR

Bit 27: PendSV clear-pending bit.

PENDSVSET

Bit 28: PendSV set-pending bit.

NMIPENDSET

Bit 31: NMI set-pending bit..

VTOR

Vector table offset register

Offset: 0x8, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TBLOFF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TBLOFF
rw
Toggle Fields

TBLOFF

Bits 7-31: Vector table base offset field.

AIRCR

Application interrupt and reset control register

Offset: 0xc, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VECTKEYSTAT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ENDIANESS
rw 		SYSRESETREQ
rw 		VECTCLRACTIVE
rw
Toggle Fields

VECTCLRACTIVE

Bit 1: VECTCLRACTIVE.

SYSRESETREQ

Bit 2: SYSRESETREQ.

ENDIANESS

Bit 15: ENDIANESS.

VECTKEYSTAT

Bits 16-31: Register key.

SCR

System control register

Offset: 0x10, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEVEONPEND
rw 		SLEEPDEEP
rw 		SLEEPONEXIT
rw
Toggle Fields

SLEEPONEXIT

Bit 1: SLEEPONEXIT.

SLEEPDEEP

Bit 2: SLEEPDEEP.

SEVEONPEND

Bit 4: Send Event on Pending bit.

CCR

Configuration and control register

Offset: 0x14, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STKALIGN
rw 		BFHFNMIGN
rw 		DIV_0_TRP
rw 		UNALIGN__TRP
rw 		USERSETMPEND
rw 		NONBASETHRDENA
rw
Toggle Fields

NONBASETHRDENA

Bit 0: Configures how the processor enters Thread mode.

USERSETMPEND

Bit 1: USERSETMPEND.

UNALIGN__TRP

Bit 3: UNALIGN_ TRP.

DIV_0_TRP

Bit 4: DIV_0_TRP.

BFHFNMIGN

Bit 8: BFHFNMIGN.

STKALIGN

Bit 9: STKALIGN.

SHPR2

System handler priority registers

Offset: 0x1c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_11
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields

PRI_11

Bits 24-31: Priority of system handler 11.

SHPR3

System handler priority registers

Offset: 0x20, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_15
rw 		PRI_14
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields

PRI_14

Bits 16-23: Priority of system handler 14.

PRI_15

Bits 24-31: Priority of system handler 15.

SCB_ACTRL

0xe000e008: System control block ACTLR

0/5 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 ACTRL

ACTRL

Auxiliary control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DISOOFP
rw 		DISFPCA
rw 		DISFOLD
rw 		DISDEFWBUF
rw 		DISMCYCINT
rw
Toggle Fields

DISMCYCINT

Bit 0: DISMCYCINT.

DISDEFWBUF

Bit 1: DISDEFWBUF.

DISFOLD

Bit 2: DISFOLD.

DISFPCA

Bit 8: DISFPCA.

DISOOFP

Bit 9: DISOOFP.

SPI1

0x40013000: Serial peripheral interface/Inter-IC sound

52/52 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 SR
0xc DR
0x10 CRCPR
0x14 RXCRCR
0x18 TXCRCR
0x1c I2SCFGR
0x20 I2SPR

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		CRCL
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

Allowed values:
0: EightBit: 8-bit CRC length
1: SixteenBit: 16-bit CRC length

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LDMA_TX
rw 		LDMA_RX
rw 		FRXTH
rw 		DS
rw 		TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		NSSP
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

Allowed values:
0: NoPulse: No NSS pulse
1: PulseGenerated: NSS pulse generated

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

DS

Bits 8-11: Data size.

Allowed values:
3: FourBit: 4-bit
4: FiveBit: 5-bit
5: SixBit: 6-bit
6: SevenBit: 7-bit
7: EightBit: 8-bit
8: NineBit: 9-bit
9: TenBit: 10-bit
10: ElevenBit: 11-bit
11: TwelveBit: 12-bit
12: ThirteenBit: 13-bit
13: FourteenBit: 14-bit
14: FifteenBit: 15-bit
15: SixteenBit: 16-bit

FRXTH

Bit 12: FIFO reception threshold.

Allowed values:
0: Half: RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)
1: Quarter: RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)

LDMA_RX

Bit 13: Last DMA transfer for reception.

Allowed values:
0: Even: Number of data to transfer for receive is even
1: Odd: Number of data to transfer for receive is odd

LDMA_TX

Bit 14: Last DMA transfer for transmission.

Allowed values:
0: Even: Number of data to transfer for transmit is even
1: Odd: Number of data to transfer for transmit is odd

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FTLVL
r 		FRLVL
r 		FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

UDR

Bit 3: Underrun flag.

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

FRLVL

Bits 9-10: FIFO reception level.

Allowed values:
0: Empty: Rx FIFO Empty
1: Quarter: Rx 1/4 FIFO
2: Half: Rx 1/2 FIFO
3: Full: Rx FIFO full

FTLVL

Bits 11-12: FIFO transmission level.

Allowed values:
0: Empty: Tx FIFO Empty
1: Quarter: Tx 1/4 FIFO
2: Half: Tx 1/2 FIFO
3: Full: Tx FIFO full

DR

data register

Offset: 0xc, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields

DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

I2SCFGR

configuration register

Offset: 0x1c, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Inactive state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

prescaler register

Offset: 0x20, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields

I2SDIV

Bits 0-7: linear prescaler.

Allowed values: 0x2-0xff

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

SPI2

0x40003800: Serial peripheral interface/Inter-IC sound

52/52 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 SR
0xc DR
0x10 CRCPR
0x14 RXCRCR
0x18 TXCRCR
0x1c I2SCFGR
0x20 I2SPR

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		CRCL
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

Allowed values:
0: EightBit: 8-bit CRC length
1: SixteenBit: 16-bit CRC length

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LDMA_TX
rw 		LDMA_RX
rw 		FRXTH
rw 		DS
rw 		TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		NSSP
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

Allowed values:
0: NoPulse: No NSS pulse
1: PulseGenerated: NSS pulse generated

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

DS

Bits 8-11: Data size.

Allowed values:
3: FourBit: 4-bit
4: FiveBit: 5-bit
5: SixBit: 6-bit
6: SevenBit: 7-bit
7: EightBit: 8-bit
8: NineBit: 9-bit
9: TenBit: 10-bit
10: ElevenBit: 11-bit
11: TwelveBit: 12-bit
12: ThirteenBit: 13-bit
13: FourteenBit: 14-bit
14: FifteenBit: 15-bit
15: SixteenBit: 16-bit

FRXTH

Bit 12: FIFO reception threshold.

Allowed values:
0: Half: RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)
1: Quarter: RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)

LDMA_RX

Bit 13: Last DMA transfer for reception.

Allowed values:
0: Even: Number of data to transfer for receive is even
1: Odd: Number of data to transfer for receive is odd

LDMA_TX

Bit 14: Last DMA transfer for transmission.

Allowed values:
0: Even: Number of data to transfer for transmit is even
1: Odd: Number of data to transfer for transmit is odd

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FTLVL
r 		FRLVL
r 		FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

UDR

Bit 3: Underrun flag.

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

FRLVL

Bits 9-10: FIFO reception level.

Allowed values:
0: Empty: Rx FIFO Empty
1: Quarter: Rx 1/4 FIFO
2: Half: Rx 1/2 FIFO
3: Full: Rx FIFO full

FTLVL

Bits 11-12: FIFO transmission level.

Allowed values:
0: Empty: Tx FIFO Empty
1: Quarter: Tx 1/4 FIFO
2: Half: Tx 1/2 FIFO
3: Full: Tx FIFO full

DR

data register

Offset: 0xc, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields

DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

I2SCFGR

configuration register

Offset: 0x1c, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Inactive state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

prescaler register

Offset: 0x20, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields

I2SDIV

Bits 0-7: linear prescaler.

Allowed values: 0x2-0xff

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

STK

0xe000e010: SysTick timer

0/9 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CSR
0x4 RVR
0x8 CVR
0xc CALIB

CSR

SysTick control and status register

Offset: 0x0, reset: 0X00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
COUNTFLAG
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLKSOURCE
rw 		TICKINT
rw 		ENABLE
rw
Toggle Fields

ENABLE

Bit 0: Counter enable.

TICKINT

Bit 1: SysTick exception request enable.

CLKSOURCE

Bit 2: Clock source selection.

COUNTFLAG

Bit 16: COUNTFLAG.

RVR

SysTick reload value register

Offset: 0x4, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RELOAD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RELOAD
rw
Toggle Fields

RELOAD

Bits 0-23: RELOAD value.

CVR

SysTick current value register

Offset: 0x8, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CURRENT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CURRENT
rw
Toggle Fields

CURRENT

Bits 0-23: Current counter value.

CALIB

SysTick calibration value register

Offset: 0xc, reset: 0X00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NOREF
rw 		SKEW
rw 		TENMS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TENMS
rw
Toggle Fields

TENMS

Bits 0-23: Calibration value.

SKEW

Bit 30: SKEW flag: Indicates whether the TENMS value is exact.

NOREF

Bit 31: NOREF flag. Reads as zero.

SYSCFG

0x40010000: System configuration controller

0/22 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CFGR1
0x18 CFGR2

CFGR1

SYSCFG configuration register 1

Offset: 0x0, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
I2C_PAx_FMP
rw 		I2C2_FMP
rw 		I2C1_FMP
rw 		I2C_PBx_FMP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOOSTEN
rw 		IR_MOD
rw 		IR_POL
rw 		PA11_PA12_RMP
rw 		MEM_MODE
rw
Toggle Fields

MEM_MODE

Bits 0-1: Memory mapping selection bits.

PA11_PA12_RMP

Bit 4: PA11 and PA12 remapping bit..

IR_POL

Bit 5: IR output polarity selection.

IR_MOD

Bits 6-7: IR Modulation Envelope signal selection..

BOOSTEN

Bit 8: I/O analog switch voltage booster enable.

I2C_PBx_FMP

Bits 16-19: Fast Mode Plus (FM+) driving capability activation bits.

I2C1_FMP

Bit 20: FM+ driving capability activation for I2C1.

I2C2_FMP

Bit 21: FM+ driving capability activation for I2C2.

I2C_PAx_FMP

Bits 22-23: Fast Mode Plus (FM+) driving capability activation bits.

CFGR2

SYSCFG configuration register 1

Offset: 0x18, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PB2_CDEN
rw 		PB1_CDEN
rw 		PB0_CDEN
rw 		PA13_CDEN
rw 		PA6_CDEN
rw 		PA5_CDEN
rw 		PA3_CDEN
rw 		PA1_CDEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRAM_PEF
rw 		ECC_LOCK
rw 		PVD_LOCK
rw 		SRAM_PARITY_LOCK
rw 		LOCKUP_LOCK
rw
Toggle Fields

LOCKUP_LOCK

Bit 0: Cortex-M0+ LOCKUP bit enable bit.

SRAM_PARITY_LOCK

Bit 1: SRAM parity lock bit.

PVD_LOCK

Bit 2: PVD lock enable bit.

ECC_LOCK

Bit 3: ECC error lock bit.

SRAM_PEF

Bit 8: SRAM parity error flag.

PA1_CDEN

Bit 16: PA1_CDEN.

PA3_CDEN

Bit 17: PA3_CDEN.

PA5_CDEN

Bit 18: PA5_CDEN.

PA6_CDEN

Bit 19: PA6_CDEN.

PA13_CDEN

Bit 20: PA13_CDEN.

PB0_CDEN

Bit 21: PB0_CDEN.

PB1_CDEN

Bit 22: PB1_CDEN.

PB2_CDEN

Bit 23: PB2_CDEN.

SYSCFG_ITLINE

0x40010080: System configuration controller

51/51 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x80 ITLINE0
0x84 ITLINE1
0x88 ITLINE2
0x8c ITLINE3
0x90 ITLINE4
0x94 ITLINE5
0x98 ITLINE6
0x9c ITLINE7
0xa4 ITLINE9
0xa8 ITLINE10
0xac ITLINE11
0xb0 ITLINE12
0xb4 ITLINE13
0xb8 ITLINE14
0xbc ITLINE15
0xc0 ITLINE16
0xc4 ITLINE17
0xc8 ITLINE18
0xcc ITLINE19
0xd4 ITLINE21
0xd8 ITLINE22
0xdc ITLINE23
0xe0 ITLINE24
0xe4 ITLINE25
0xe8 ITLINE26
0xec ITLINE27
0xf0 ITLINE28
0xf4 ITLINE29
0xfc ITLINE31

ITLINE0

interrupt line 0 status register

Offset: 0x80, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WWDG
r
Toggle Fields

WWDG

Bit 0: Window watchdog interrupt pending flag.

ITLINE1

interrupt line 1 status register

Offset: 0x84, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PVDOUT
r
Toggle Fields

PVDOUT

Bit 0: PVD supply monitoring interrupt request pending (EXTI line 16)..

ITLINE2

interrupt line 2 status register

Offset: 0x88, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTC
r 		TAMP
r
Toggle Fields

TAMP

Bit 0: TAMP.

RTC

Bit 1: RTC.

ITLINE3

interrupt line 3 status register

Offset: 0x8c, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FLASH_ECC
r 		FLASH_ITF
r
Toggle Fields

FLASH_ITF

Bit 0: FLASH_ITF.

FLASH_ECC

Bit 1: FLASH_ECC.

ITLINE4

interrupt line 4 status register

Offset: 0x90, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RCC
r
Toggle Fields

RCC

Bit 0: RCC.

ITLINE5

interrupt line 5 status register

Offset: 0x94, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI1
r 		EXTI0
r
Toggle Fields

EXTI0

Bit 0: EXTI0.

EXTI1

Bit 1: EXTI1.

ITLINE6

interrupt line 6 status register

Offset: 0x98, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI3
r 		EXTI2
r
Toggle Fields

EXTI2

Bit 0: EXTI2.

EXTI3

Bit 1: EXTI3.

ITLINE7

interrupt line 7 status register

Offset: 0x9c, reset: 0x00000000, access: read-only

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI15
r 		EXTI14
r 		EXTI13
r 		EXTI12
r 		EXTI11
r 		EXTI10
r 		EXTI9
r 		EXTI8
r 		EXTI7
r 		EXTI6
r 		EXTI5
r 		EXTI4
r
Toggle Fields

EXTI4

Bit 0: EXTI4.

EXTI5

Bit 1: EXTI5.

EXTI6

Bit 2: EXTI6.

EXTI7

Bit 3: EXTI7.

EXTI8

Bit 4: EXTI8.

EXTI9

Bit 5: EXTI9.

EXTI10

Bit 6: EXTI10.

EXTI11

Bit 7: EXTI11.

EXTI12

Bit 8: EXTI12.

EXTI13

Bit 9: EXTI13.

EXTI14

Bit 10: EXTI14.

EXTI15

Bit 11: EXTI15.

ITLINE9

interrupt line 9 status register

Offset: 0xa4, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMA1_CH1
r
Toggle Fields

DMA1_CH1

Bit 0: DMA1_CH1.

ITLINE10

interrupt line 10 status register

Offset: 0xa8, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMA1_CH3
r 		DMA1_CH2
r
Toggle Fields

DMA1_CH2

Bit 0: DMA1_CH1.

DMA1_CH3

Bit 1: DMA1_CH3.

ITLINE11

interrupt line 11 status register

Offset: 0xac, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMA1_CH5
r 		DMA1_CH4
r 		DMAMUX
r
Toggle Fields

DMAMUX

Bit 0: DMAMUX.

DMA1_CH4

Bit 1: DMA1_CH4.

DMA1_CH5

Bit 2: DMA1_CH5.

ITLINE12

interrupt line 12 status register

Offset: 0xb0, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADC
r
Toggle Fields

ADC

Bit 0: ADC.

ITLINE13

interrupt line 13 status register

Offset: 0xb4, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM1_BRK
r 		TIM1_UPD
r 		TIM1_TRG
r 		TIM1_CCU
r
Toggle Fields

TIM1_CCU

Bit 0: TIM1_CCU.

TIM1_TRG

Bit 1: TIM1_TRG.

TIM1_UPD

Bit 2: TIM1_UPD.

TIM1_BRK

Bit 3: TIM1_BRK.

ITLINE14

interrupt line 14 status register

Offset: 0xb8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM1_CC
r
Toggle Fields

TIM1_CC

Bit 0: TIM1_CC.

ITLINE15

interrupt line 15 status register

Offset: 0xbc, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM2
r
Toggle Fields

TIM2

Bit 0: TIM2.

ITLINE16

interrupt line 16 status register

Offset: 0xc0, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM3
r
Toggle Fields

TIM3

Bit 0: TIM3.

ITLINE17

interrupt line 17 status register

Offset: 0xc4, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LPTIM1
r
Toggle Fields

LPTIM1

Bit 2: LPTIM1.

ITLINE18

interrupt line 18 status register

Offset: 0xc8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LPTIM2
r
Toggle Fields

LPTIM2

Bit 1: LPTIM2.

ITLINE19

interrupt line 19 status register

Offset: 0xcc, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM14
r
Toggle Fields

TIM14

Bit 0: TIM14.

ITLINE21

interrupt line 21 status register

Offset: 0xd4, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM16
r
Toggle Fields

TIM16

Bit 0: TIM16.

ITLINE22

interrupt line 22 status register

Offset: 0xd8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIM17
r
Toggle Fields

TIM17

Bit 0: TIM17.

ITLINE23

interrupt line 23 status register

Offset: 0xdc, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2C1
r
Toggle Fields

I2C1

Bit 0: I2C1.

ITLINE24

interrupt line 24 status register

Offset: 0xe0, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2C2
r
Toggle Fields

I2C2

Bit 0: I2C2.

ITLINE25

interrupt line 25 status register

Offset: 0xe4, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI1
r
Toggle Fields

SPI1

Bit 0: SPI1.

ITLINE26

interrupt line 26 status register

Offset: 0xe8, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2
r
Toggle Fields

SPI2

Bit 0: SPI2.

ITLINE27

interrupt line 27 status register

Offset: 0xec, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USART1
r
Toggle Fields

USART1

Bit 0: USART1.

ITLINE28

interrupt line 28 status register

Offset: 0xf0, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USART2
r
Toggle Fields

USART2

Bit 0: USART2.

ITLINE29

interrupt line 29 status register

Offset: 0xf4, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USART5
r
Toggle Fields

USART5

Bit 2: USART5.

ITLINE31

interrupt line 31 status register

Offset: 0xfc, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AES
r 		RNG
r
Toggle Fields

RNG

Bit 0: RNG.

AES

Bit 1: AES.

TAMP

0x4000b000: Tamper and backup registers

15/52 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0xc FLTCR
0x2c IER
0x30 SR
0x34 MISR
0x3c SCR
0x100 BKP0R
0x104 BKP1R
0x108 BKP2R
0x10c BKP3R
0x110 BKP4R

CR1

control register 1

Offset: 0x0, reset: 0xFFFF0000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ITAMP6E
rw 		ITAMP5E
rw 		ITAMP4E
rw 		ITAMP3E
rw 		ITAMP1E
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2E
rw 		TAMP1E
rw
Toggle Fields

TAMP1E

Bit 0: TAMP1E.

TAMP2E

Bit 1: TAMP2E.

ITAMP1E

Bit 16: ITAMP1E.

ITAMP3E

Bit 18: ITAMP3E.

ITAMP4E

Bit 19: ITAMP4E.

ITAMP5E

Bit 20: ITAMP5E.

ITAMP6E

Bit 21: ITAMP6E.

CR2

control register 2

Offset: 0x4, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TAMP2TRG
rw 		TAMP1TRG
rw 		TAMP2MSK
rw 		TAMP1MSK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2NOER
rw 		TAMP1NOER
rw
Toggle Fields

TAMP1NOER

Bit 0: TAMP1NOER.

TAMP2NOER

Bit 1: TAMP2NOER.

TAMP1MSK

Bit 16: TAMP1MSK.

TAMP2MSK

Bit 17: TAMP2MSK.

TAMP1TRG

Bit 24: TAMP1TRG.

TAMP2TRG

Bit 25: TAMP2TRG.

FLTCR

TAMP filter control register

Offset: 0xc, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMPPUDIS
rw 		TAMPPRCH
rw 		TAMPFLT
rw 		TAMPFREQ
rw
Toggle Fields

TAMPFREQ

Bits 0-2: TAMPFREQ.

TAMPFLT

Bits 3-4: TAMPFLT.

TAMPPRCH

Bits 5-6: TAMPPRCH.

TAMPPUDIS

Bit 7: TAMPPUDIS.

IER

TAMP interrupt enable register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ITAMP6IE
rw 		ITAMP5IE
rw 		ITAMP4IE
rw 		ITAMP3IE
rw 		ITAMP1IE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2IE
rw 		TAMP1IE
rw
Toggle Fields

TAMP1IE

Bit 0: TAMP1IE.

TAMP2IE

Bit 1: TAMP2IE.

ITAMP1IE

Bit 16: ITAMP1IE.

ITAMP3IE

Bit 18: ITAMP3IE.

ITAMP4IE

Bit 19: ITAMP4IE.

ITAMP5IE

Bit 20: ITAMP5IE.

ITAMP6IE

Bit 21: ITAMP6IE.

SR

TAMP status register

Offset: 0x30, reset: 0x00000000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ITAMP7F
r 		ITAMP6F
r 		ITAMP5F
r 		ITAMP4F
r 		ITAMP3F
r 		ITAMP1F
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2F
r 		TAMP1F
r
Toggle Fields

TAMP1F

Bit 0: TAMP1F.

TAMP2F

Bit 1: TAMP2F.

ITAMP1F

Bit 16: ITAMP1F.

ITAMP3F

Bit 18: ITAMP3F.

ITAMP4F

Bit 19: ITAMP4F.

ITAMP5F

Bit 20: ITAMP5F.

ITAMP6F

Bit 21: ITAMP6F.

ITAMP7F

Bit 22: ITAMP7F.

MISR

TAMP masked interrupt status register

Offset: 0x34, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ITAMP6MF
r 		ITAMP5MF
r 		ITAMP4MF
r 		ITAMP3MF
r 		ITAMP1MF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2MF
r 		TAMP1MF
r
Toggle Fields

TAMP1MF

Bit 0: TAMP1MF:.

TAMP2MF

Bit 1: TAMP2MF.

ITAMP1MF

Bit 16: ITAMP1MF.

ITAMP3MF

Bit 18: ITAMP3MF.

ITAMP4MF

Bit 19: ITAMP4MF.

ITAMP5MF

Bit 20: ITAMP5MF.

ITAMP6MF

Bit 21: ITAMP6MF.

SCR

TAMP status clear register

Offset: 0x3c, reset: 0x00000000, access: write-only

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CITAMP7F
w 		CITAMP6F
w 		CITAMP5F
w 		CITAMP4F
w 		CITAMP3F
w 		CITAMP1F
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTAMP2F
w 		CTAMP1F
w
Toggle Fields

CTAMP1F

Bit 0: CTAMP1F.

CTAMP2F

Bit 1: CTAMP2F.

CITAMP1F

Bit 16: CITAMP1F.

CITAMP3F

Bit 18: CITAMP3F.

CITAMP4F

Bit 19: CITAMP4F.

CITAMP5F

Bit 20: CITAMP5F.

CITAMP6F

Bit 21: CITAMP6F.

CITAMP7F

Bit 22: CITAMP7F.

BKP0R

TAMP backup register

Offset: 0x100, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields

BKP

Bits 0-31: BKP.

BKP1R

TAMP backup register

Offset: 0x104, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields

BKP

Bits 0-31: BKP.

BKP2R

TAMP backup register

Offset: 0x108, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields

BKP

Bits 0-31: BKP.

BKP3R

TAMP backup register

Offset: 0x10c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields

BKP

Bits 0-31: BKP.

BKP4R

TAMP backup register

Offset: 0x110, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields

BKP

Bits 0-31: BKP.

TIM1

0x40012c00: Advanced-timers

34/199 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 SMCR
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x1c CCMR2_Input
0x1c CCMR2_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x30 RCR
0x34 CCR1
0x38 CCR2
0x3c CCR3
0x40 CCR4
0x44 BDTR
0x48 DCR
0x4c DMAR
0x50 OR1
0x54 CCMR3_Output
0x58 CCR5
0x5c CCR6
0x60 AF1
0x64 AF2
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MMS2
rw 		OIS6
rw 		OIS5
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIS4
rw 		OIS3N
rw 		OIS3
rw 		OIS2N
rw 		OIS2
rw 		OIS1N
rw 		OIS1
rw 		TI1S
rw 		MMS
rw 		CCDS
rw 		CCUS
rw 		CCPC
rw
Toggle Fields

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

MMS

Bits 4-6: Master mode selection.

TI1S

Bit 7: TI1 selection.

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

OIS2

Bit 10: Output Idle state 2.

OIS2N

Bit 11: Output Idle state 2.

OIS3

Bit 12: Output Idle state 3.

OIS3N

Bit 13: Output Idle state 3.

OIS4

Bit 14: Output Idle state 4.

OIS5

Bit 16: Output Idle state 5 (OC5 output).

OIS6

Bit 18: Output Idle state 6 (OC6 output).

MMS2

Bits 20-23: Master mode selection 2.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw 		SMS_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS_4
rw 		OCCS
rw 		SMS
rw
Toggle Fields

SMS

Bits 0-2: Slave mode selection.

OCCS

Bit 3: OCREF clear selection.

TS_4

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

ETF

Bits 8-11: External trigger filter.

ETPS

Bits 12-13: External trigger prescaler.

ECE

Bit 14: External clock enable.

ETP

Bit 15: External trigger polarity.

SMS_3

Bit 16: Slave mode selection - bit 3.

TS

Bits 20-21: Trigger selection.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		COMDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		BIE
rw 		TIE
rw 		COMIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

COMIE

Bit 5: COM interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CC6IF
rw 		CC5IF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SBIF
rw 		CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		B2IF
rw 		BIF
rw 		TIF
rw 		COMIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

BIF

Bit 7: Break interrupt flag.

B2IF

Bit 8: Break 2 interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

SBIF

Bit 13: System Break interrupt flag.

CC5IF

Bit 16: Compare 5 interrupt flag.

CC6IF

Bit 17: Compare 6 interrupt flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
B2G
w 		BG
w 		TG
w 		COMG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

CC2G

Bit 2: Capture/compare 2 generation.

CC3G

Bit 3: Capture/compare 3 generation.

CC4G

Bit 4: Capture/compare 4 generation.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

BG

Bit 7: Break generation.

B2G

Bit 8: Break 2 generation.

CCMR1_Input

capture/compare mode register 1 (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC2CE
rw 		OC2M
rw 		OC2PE
rw 		OC2FE
rw 		CC2S
rw 		OC1CE
rw 		OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output Compare 1 fast enable.

OC1PE

Bit 3: Output Compare 1 preload enable.

OC1M

Bits 4-6: Output Compare 1 mode.

OC1CE

Bit 7: Output Compare 1 clear enable.

CC2S

Bits 8-9: Capture/Compare 2 selection.

OC2FE

Bit 10: Output Compare 2 fast enable.

OC2PE

Bit 11: Output Compare 2 preload enable.

OC2M

Bits 12-14: Output Compare 2 mode.

OC2CE

Bit 15: Output Compare 2 clear enable.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC2M_3
rw 		OC1M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC2CE
rw 		OC2M
rw 		OC2PE
rw 		OC2FE
rw 		CC2S
rw 		OC1CE
rw 		OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output Compare 1 fast enable.

OC1PE

Bit 3: Output Compare 1 preload enable.

OC1M

Bits 4-6: Output Compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC1CE

Bit 7: Output Compare 1 clear enable.

CC2S

Bits 8-9: Capture/Compare 2 selection.

OC2FE

Bit 10: Output Compare 2 fast enable.

OC2PE

Bit 11: Output Compare 2 preload enable.

OC2M

Bits 12-14: Output Compare 2 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC2CE

Bit 15: Output Compare 2 clear enable.

OC1M_3

Bit 16: Output Compare 1 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC2M_3

Bit 24: Output Compare 2 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCMR2_Input

capture/compare mode register 2 (output mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC4CE
rw 		OC4M
rw 		OC4PE
rw 		OC4FE
rw 		CC4S
rw 		OC3CE
rw 		OC3M
rw 		OC3PE
rw 		OC3FE
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

OC3FE

Bit 2: Output compare 3 fast enable.

OC3PE

Bit 3: Output compare 3 preload enable.

OC3M

Bits 4-6: Output compare 3 mode.

OC3CE

Bit 7: Output compare 3 clear enable.

CC4S

Bits 8-9: Capture/Compare 4 selection.

OC4FE

Bit 10: Output compare 4 fast enable.

OC4PE

Bit 11: Output compare 4 preload enable.

OC4M

Bits 12-14: Output compare 4 mode.

OC4CE

Bit 15: Output compare 4 clear enable.

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC4M_3
rw 		OC3M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC4CE
rw 		OC4M
rw 		OC4PE
rw 		OC4FE
rw 		CC4S
rw 		OC3CE
rw 		OC3M
rw 		OC3PE
rw 		OC3FE
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

OC3FE

Bit 2: Output compare 3 fast enable.

OC3PE

Bit 3: Output compare 3 preload enable.

OC3M

Bits 4-6: Output compare 3 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC3CE

Bit 7: Output compare 3 clear enable.

CC4S

Bits 8-9: Capture/Compare 4 selection.

OC4FE

Bit 10: Output compare 4 fast enable.

OC4PE

Bit 11: Output compare 4 preload enable.

OC4M

Bits 12-14: Output compare 4 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC4CE

Bit 15: Output compare 4 clear enable.

OC3M_3

Bit 16: Output Compare 3 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC4M_3

Bit 24: Output Compare 4 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CC6P
rw 		CC6E
rw 		CC5P
rw 		CC5E
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3NE
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2NE
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1NE
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NE

Bit 2: Capture/Compare 1 complementary output enable.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NE

Bit 6: Capture/Compare 2 complementary output enable.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NE

Bit 10: Capture/Compare 3 complementary output enable.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 complementary output polarity.

CC5E

Bit 16: Capture/Compare 5 output enable.

CC5P

Bit 17: Capture/Compare 5 output polarity.

CC6E

Bit 20: Capture/Compare 6 output enable.

CC6P

Bit 21: Capture/Compare 6 output polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: Unspecified

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
UIFCPY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields

CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

UIFCPY

Bit 31: UIF copy.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REP
rw
Toggle Fields

REP

Bits 0-15: Repetition counter value.

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1
rw
Toggle Fields

CCR1

Bits 0-15: Capture/Compare 1 value.

Allowed values: 0x0-0xffff

CCR2

capture/compare register 2

Offset: 0x38, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR2
rw
Toggle Fields

CCR2

Bits 0-15: Capture/Compare 2 value.

Allowed values: 0x0-0xffff

CCR3

capture/compare register 3

Offset: 0x3c, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR3
rw
Toggle Fields

CCR3

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR4

capture/compare register 4

Offset: 0x40, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR4
rw
Toggle Fields

CCR4

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, reset: 0x0000, access: read-write

3/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BK2ID
rw 		BKBID
rw 		BK2DSRM
rw 		BKDSRM
rw 		BK2P
rw 		BK2E
rw 		BK2F
rw 		BKF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MOE
rw 		AOE
rw 		BKP
rw 		BKE
rw 		OSSR
rw 		OSSI
rw 		LOCK
rw 		DTG
rw
Toggle Fields

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are forced to idle level

OSSR

Bit 11: Off-state selection for Run mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are enabled with their inactive level

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

Allowed values:
0: DisabledIdle: OC/OCN are disabled or forced idle depending on OSSI
1: Enabled: OC/OCN are enabled if CCxE/CCxNE are set

BKF

Bits 16-19: Break filter.

BK2F

Bits 20-23: Break 2 filter.

BK2E

Bit 24: Break 2 enable.

BK2P

Bit 25: Break 2 polarity.

BKDSRM

Bit 26: Break Disarm.

BK2DSRM

Bit 27: Break2 Disarm.

BKBID

Bit 28: Break Bidirectional.

BK2ID

Bit 29: Break2 bidirectional.

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR1

option register 1

Offset: 0x50, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCREF_CLR
rw
Toggle Fields

OCREF_CLR

Bit 0: Ocref_clr source selection.

CCMR3_Output

capture/compare mode register 2 (output mode)

Offset: 0x54, reset: 0x00000000, access: read-write

4/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC6M_3
rw 		OC5M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC6CE
rw 		OC6M
rw 		OC6PE
rw 		OC6FE
rw 		OC5CE
rw 		OC5M
rw 		OC5PE
rw 		OC5FE
rw
Toggle Fields

OC5FE

Bit 2: Output compare 5 fast enable.

OC5PE

Bit 3: Output compare 5 preload enable.

OC5M

Bits 4-6: Output compare 5 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC5CE

Bit 7: Output compare 5 clear enable.

OC6FE

Bit 10: Output compare 6 fast enable.

OC6PE

Bit 11: Output compare 6 preload enable.

OC6M

Bits 12-14: Output compare 6 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC6CE

Bit 15: Output compare 6 clear enable.

OC5M_3

Bit 16: Output Compare 5 mode bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC6M_3

Bit 24: Output Compare 6 mode bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCR5

capture/compare register 4

Offset: 0x58, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GC5C3
rw 		GC5C2
rw 		GC5C1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR5
rw
Toggle Fields

CCR5

Bits 0-15: Capture/Compare value.

GC5C1

Bit 29: Group Channel 5 and Channel 1.

GC5C2

Bit 30: Group Channel 5 and Channel 2.

GC5C3

Bit 31: Group Channel 5 and Channel 3.

CCR6

capture/compare register 4

Offset: 0x5c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR6
rw
Toggle Fields

CCR6

Bits 0-15: Capture/Compare value.

AF1

DMA address for full transfer

Offset: 0x60, reset: 0x00000001, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ETRSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETRSEL
rw 		BKCMP2P
rw 		BKCMP1P
rw 		BKINP
rw 		BKCMP2E
rw 		BKCMP1E
rw 		BKINE
rw
Toggle Fields

BKINE

Bit 0: BRK BKIN input enable.

BKCMP1E

Bit 1: BRK COMP1 enable.

BKCMP2E

Bit 2: BRK COMP2 enable.

BKINP

Bit 9: BRK BKIN input polarity.

BKCMP1P

Bit 10: BRK COMP1 input polarity.

BKCMP2P

Bit 11: BRK COMP2 input polarity.

ETRSEL

Bits 14-16: ETR source selection.

AF2

DMA address for full transfer

Offset: 0x64, reset: 0x00000001, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BK2CMP2P
rw 		BK2CMP1P
rw 		BK2INP
rw 		BK2DFBK0E
rw 		BK2CMP2E
rw 		BK2CMP1E
rw 		BK2INE
rw
Toggle Fields

BK2INE

Bit 0: BRK2 BKIN input enable.

BK2CMP1E

Bit 1: BRK2 COMP1 enable.

BK2CMP2E

Bit 2: BRK2 COMP2 enable.

BK2DFBK0E

Bit 8: BRK2 DFSDM_BREAK0 enable.

BK2INP

Bit 9: BRK2 BKIN input polarity.

BK2CMP1P

Bit 10: BRK2 COMP1 input polarity.

BK2CMP2P

Bit 11: BRK2 COMP2 input polarity.

TISEL

TIM1 timer input selection register

Offset: 0x68, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TI4SEL3_0
rw 		TI3SEL3_0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI2SEL3_0
rw 		TI1SEL3_0
rw
Toggle Fields

TI1SEL3_0

Bits 0-3: selects TI1[0] to TI1[15] input.

TI2SEL3_0

Bits 8-11: selects TI2[0] to TI2[15] input.

TI3SEL3_0

Bits 16-19: selects TI3[0] to TI3[15] input.

TI4SEL3_0

Bits 24-27: selects TI4[0] to TI4[15] input.

TIM14

0x40002000: General purpose timers

11/32 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x34 CCR1
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

6/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1OF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC1M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC1CE
rw 		OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: CC1S.

OC1FE

Bit 2: OC1FE.

OC1PE

Bit 3: OC1PE.

OC1M

Bits 4-6: OC1M.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy
4: ForceInactive: OCyREF is forced low
5: ForceActive: OCyREF is forced high
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active
7: PwmMode2: Inversely to PwmMode1

OC1CE

Bit 7: OC1CE.

OC1M_3

Bit 16: Output Compare 1 mode - bit 3.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
UIFCPY
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields

CNT

Bits 0-15: low counter value.

UIFCPY

Bit 31: UIF Copy.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Low Auto-reload value.

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1
rw
Toggle Fields

CCR1

Bits 0-15: Low Capture/Compare 1 value.

TISEL

TIM timer input selection register

Offset: 0x68, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TISEL
rw
Toggle Fields

TISEL

Bits 0-3: TI1[0] to TI1[15] input selection.

TIM16

0x40014400: General purpose timers

12/68 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x30 RCR
0x34 CCR1
0x44 BDTR
0x48 DCR
0x4c DMAR
0x60 AF1
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

6/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIS1N
rw 		OIS1
rw 		CCDS
rw 		CCUS
rw 		CCPC
rw
Toggle Fields

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
COMDE
rw 		CC1DE
rw 		UDE
rw 		BIE
rw 		COMIE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

COMIE

Bit 5: COM interrupt enable.

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

COMDE

Bit 13: COM DMA request enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1OF
rw 		BIF
rw 		COMIF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

BIF

Bit 7: Break interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BG
w 		COMG
w 		CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

1/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC1M_2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output Compare 1 fast enable.

OC1PE

Bit 3: Output Compare 1 preload enable.

OC1M

Bits 4-6: Output Compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy
4: ForceInactive: OCyREF is forced low
5: ForceActive: OCyREF is forced high
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active
7: PwmMode2: Inversely to PwmMode1

OC1M_2

Bit 16: Output Compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1NP
rw 		CC1NE
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NE

Bit 2: Capture/Compare 1 complementary output enable.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
UIFCPY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields

CNT

Bits 0-15: counter value.

UIFCPY

Bit 31: UIF Copy.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Auto-reload value.

RCR

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REP
rw
Toggle Fields

REP

Bits 0-7: Repetition counter value.

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1
rw
Toggle Fields

CCR1

Bits 0-15: Capture/Compare 1 value.

BDTR

break and dead-time register

Offset: 0x44, reset: 0x0000, access: read-write

0/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKBID
rw 		BKDSRM
rw 		BKF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MOE
rw 		AOE
rw 		BKP
rw 		BKE
rw 		OSSR
rw 		OSSI
rw 		LOCK
rw 		DTG
rw
Toggle Fields

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

BKF

Bits 16-19: Break filter.

BKDSRM

Bit 26: Break Disarm.

BKBID

Bit 28: Break Bidirectional.

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields

DMAB

Bits 0-15: DMA register for burst accesses.

AF1

TIM17 option register 1

Offset: 0x60, reset: 0x0000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKCMP2P
rw 		BKCMP1P
rw 		BKINP
rw 		BKDFBK1E
rw 		BKCMP2E
rw 		BKCMP1E
rw 		BKINE
rw
Toggle Fields

BKINE

Bit 0: BRK BKIN input enable.

BKCMP1E

Bit 1: BRK COMP1 enable.

BKCMP2E

Bit 2: BRK COMP2 enable.

BKDFBK1E

Bit 8: BRK DFSDM_BREAK1 enable.

BKINP

Bit 9: BRK BKIN input polarity.

BKCMP1P

Bit 10: BRK COMP1 input polarity.

BKCMP2P

Bit 11: BRK COMP2 input polarit.

TISEL

input selection register

Offset: 0x68, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1SEL
rw
Toggle Fields

TI1SEL

Bits 0-3: selects input.

TIM17

0x40014800: General purpose timers

12/68 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x30 RCR
0x34 CCR1
0x44 BDTR
0x48 DCR
0x4c DMAR
0x60 AF1
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

6/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIS1N
rw 		OIS1
rw 		CCDS
rw 		CCUS
rw 		CCPC
rw
Toggle Fields

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
COMDE
rw 		CC1DE
rw 		UDE
rw 		BIE
rw 		COMIE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

COMIE

Bit 5: COM interrupt enable.

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

COMDE

Bit 13: COM DMA request enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1OF
rw 		BIF
rw 		COMIF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

BIF

Bit 7: Break interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BG
w 		COMG
w 		CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

1/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC1M_2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output Compare 1 fast enable.

OC1PE

Bit 3: Output Compare 1 preload enable.

OC1M

Bits 4-6: Output Compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy
4: ForceInactive: OCyREF is forced low
5: ForceActive: OCyREF is forced high
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active
7: PwmMode2: Inversely to PwmMode1

OC1M_2

Bit 16: Output Compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1NP
rw 		CC1NE
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NE

Bit 2: Capture/Compare 1 complementary output enable.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
UIFCPY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields

CNT

Bits 0-15: counter value.

UIFCPY

Bit 31: UIF Copy.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields

ARR

Bits 0-15: Auto-reload value.

RCR

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REP
rw
Toggle Fields

REP

Bits 0-7: Repetition counter value.

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1
rw
Toggle Fields

CCR1

Bits 0-15: Capture/Compare 1 value.

BDTR

break and dead-time register

Offset: 0x44, reset: 0x0000, access: read-write

0/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKBID
rw 		BKDSRM
rw 		BKF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MOE
rw 		AOE
rw 		BKP
rw 		BKE
rw 		OSSR
rw 		OSSI
rw 		LOCK
rw 		DTG
rw
Toggle Fields

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

BKF

Bits 16-19: Break filter.

BKDSRM

Bit 26: Break Disarm.

BKBID

Bit 28: Break Bidirectional.

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields

DMAB

Bits 0-15: DMA register for burst accesses.

AF1

TIM17 option register 1

Offset: 0x60, reset: 0x0000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKCMP2P
rw 		BKCMP1P
rw 		BKINP
rw 		BKDFBK1E
rw 		BKCMP2E
rw 		BKCMP1E
rw 		BKINE
rw
Toggle Fields

BKINE

Bit 0: BRK BKIN input enable.

BKCMP1E

Bit 1: BRK COMP1 enable.

BKCMP2E

Bit 2: BRK COMP2 enable.

BKDFBK1E

Bit 8: BRK DFSDM_BREAK1 enable.

BKINP

Bit 9: BRK BKIN input polarity.

BKCMP1P

Bit 10: BRK COMP1 input polarity.

BKCMP2P

Bit 11: BRK COMP2 input polarit.

TISEL

input selection register

Offset: 0x68, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1SEL
rw
Toggle Fields

TI1SEL

Bits 0-3: selects input.

TIM2

0x40000000: General-purpose-timers

20/118 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 SMCR
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x1c CCMR2_Input
0x1c CCMR2_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x34 CCR1
0x38 CCR2
0x3c CCR3
0x40 CCR4
0x48 DCR
0x4c DMAR
0x50 OR1
0x60 AF1
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields

CCDS

Bit 3: Capture/compare DMA selection.

MMS

Bits 4-6: Master mode selection.

TI1S

Bit 7: TI1 selection.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS_4_3
rw 		SMS_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		OCCS
rw 		SMS
rw
Toggle Fields

SMS

Bits 0-2: Slave mode selection.

OCCS

Bit 3: OCREF clear selection.

TS

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

ETF

Bits 8-11: External trigger filter.

ETPS

Bits 12-13: External trigger prescaler.

ECE

Bit 14: External clock enable.

ETP

Bit 15: External trigger polarity.

SMS_3

Bit 16: Slave mode selection - bit 3.

TS_4_3

Bits 20-21: Trigger selection.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

CC2G

Bit 2: Capture/compare 2 generation.

CC3G

Bit 3: Capture/compare 3 generation.

CC4G

Bit 4: Capture/compare 4 generation.

TG

Bit 6: Trigger generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/compare 2 selection.

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC2M_3
rw 		OC1M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC2CE
rw 		OC2M
rw 		OC2PE
rw 		OC2FE
rw 		CC2S
rw 		OC1CE
rw 		OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output compare 1 fast enable.

OC1PE

Bit 3: Output compare 1 preload enable.

OC1M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC1CE

Bit 7: Output compare 1 clear enable.

CC2S

Bits 8-9: Capture/Compare 2 selection.

OC2FE

Bit 10: Output compare 2 fast enable.

OC2PE

Bit 11: Output compare 2 preload enable.

OC2M

Bits 12-14: Output compare 2 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC2CE

Bit 15: Output compare 2 clear enable.

OC1M_3

Bit 16: Output Compare 1 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC2M_3

Bit 24: Output Compare 2 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

IC3PSC

Bits 2-3: Input capture 3 prescaler.

IC3F

Bits 4-7: Input capture 3 filter.

CC4S

Bits 8-9: Capture/Compare 4 selection.

IC4PSC

Bits 10-11: Input capture 4 prescaler.

IC4F

Bits 12-15: Input capture 4 filter.

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC4M_3
rw 		OC3M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC4CE
rw 		OC4M
rw 		OC4PE
rw 		OC4FE
rw 		CC4S
rw 		OC3CE
rw 		OC3M
rw 		OC3PE
rw 		OC3FE
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

OC3FE

Bit 2: Output compare 3 fast enable.

OC3PE

Bit 3: Output compare 3 preload enable.

OC3M

Bits 4-6: Output compare 3 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC3CE

Bit 7: Output compare 3 clear enable.

CC4S

Bits 8-9: Capture/Compare 4 selection.

OC4FE

Bit 10: Output compare 4 fast enable.

OC4PE

Bit 11: Output compare 4 preload enable.

OC4M

Bits 12-14: Output compare 4 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC4CE

Bit 15: Output compare 4 clear enable.

OC3M_3

Bit 16: Output Compare 3 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC4M_3

Bit 24: Output Compare 4 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT_L
rw
Toggle Fields

CNT_L

Bits 0-15: Low counter value.

CNT_H

Bits 16-31: High counter value (TIM2 only).

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR_L
rw
Toggle Fields

ARR_L

Bits 0-15: Low Auto-reload value.

ARR_H

Bits 16-31: High Auto-reload value (TIM2 only).

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR1_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1_L
rw
Toggle Fields

CCR1_L

Bits 0-15: Low Capture/Compare 1 value.

CCR1_H

Bits 16-31: High Capture/Compare 1 value (TIM2 only).

CCR2

capture/compare register 2

Offset: 0x38, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR2_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR2_L
rw
Toggle Fields

CCR2_L

Bits 0-15: Low Capture/Compare 2 value.

CCR2_H

Bits 16-31: High Capture/Compare 2 value (TIM2 only).

CCR3

capture/compare register 3

Offset: 0x3c, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR3_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR3_L
rw
Toggle Fields

CCR3_L

Bits 0-15: Low Capture/Compare value.

CCR3_H

Bits 16-31: High Capture/Compare value (TIM2 only).

CCR4

capture/compare register 4

Offset: 0x40, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR4_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR4_L
rw
Toggle Fields

CCR4_L

Bits 0-15: Low Capture/Compare value.

CCR4_H

Bits 16-31: High Capture/Compare value (TIM2 only).

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR1

TIM option register

Offset: 0x50, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOCREF_CLR
rw
Toggle Fields

IOCREF_CLR

Bit 0: IOCREF_CLR.

AF1

TIM alternate function option register 1

Offset: 0x60, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ETRSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETRSEL
rw
Toggle Fields

ETRSEL

Bits 14-17: External trigger source selection.

TISEL

TIM alternate function option register 1

Offset: 0x68, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI2SEL
rw 		TI1SEL
rw
Toggle Fields

TI1SEL

Bits 0-3: TI1SEL.

TI2SEL

Bits 8-11: TI2SEL.

TIM3

0x40000400: General-purpose-timers

20/118 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR1
0x4 CR2
0x8 SMCR
0xc DIER
0x10 SR
0x14 EGR
0x18 CCMR1_Input
0x18 CCMR1_Output
0x1c CCMR2_Input
0x1c CCMR2_Output
0x20 CCER
0x24 CNT
0x28 PSC
0x2c ARR
0x34 CCR1
0x38 CCR2
0x3c CCR3
0x40 CCR4
0x48 DCR
0x4c DMAR
0x50 OR1
0x60 AF1
0x68 TISEL

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UIFREMAP
rw 		CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields

CCDS

Bit 3: Capture/compare DMA selection.

MMS

Bits 4-6: Master mode selection.

TI1S

Bit 7: TI1 selection.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS_4_3
rw 		SMS_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		OCCS
rw 		SMS
rw
Toggle Fields

SMS

Bits 0-2: Slave mode selection.

OCCS

Bit 3: OCREF clear selection.

TS

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

ETF

Bits 8-11: External trigger filter.

ETPS

Bits 12-13: External trigger prescaler.

ECE

Bit 14: External clock enable.

ETP

Bit 15: External trigger polarity.

SMS_3

Bit 16: Slave mode selection - bit 3.

TS_4_3

Bits 20-21: Trigger selection.

DIER

DMA/Interrupt enable register

Offset: 0xc, reset: 0x0000, access: read-write

1/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC1G

Bit 1: Capture/compare 1 generation.

CC2G

Bit 2: Capture/compare 2 generation.

CC3G

Bit 3: Capture/compare 3 generation.

CC4G

Bit 4: Capture/compare 4 generation.

TG

Bit 6: Trigger generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/compare 2 selection.

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC2M_3
rw 		OC1M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC2CE
rw 		OC2M
rw 		OC2PE
rw 		OC2FE
rw 		CC2S
rw 		OC1CE
rw 		OC1M
rw 		OC1PE
rw 		OC1FE
rw 		CC1S
rw
Toggle Fields

CC1S

Bits 0-1: Capture/Compare 1 selection.

OC1FE

Bit 2: Output compare 1 fast enable.

OC1PE

Bit 3: Output compare 1 preload enable.

OC1M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC1CE

Bit 7: Output compare 1 clear enable.

CC2S

Bits 8-9: Capture/Compare 2 selection.

OC2FE

Bit 10: Output compare 2 fast enable.

OC2PE

Bit 11: Output compare 2 preload enable.

OC2M

Bits 12-14: Output compare 2 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC2CE

Bit 15: Output compare 2 clear enable.

OC1M_3

Bit 16: Output Compare 1 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC2M_3

Bit 24: Output Compare 2 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

IC3PSC

Bits 2-3: Input capture 3 prescaler.

IC3F

Bits 4-7: Input capture 3 filter.

CC4S

Bits 8-9: Capture/Compare 4 selection.

IC4PSC

Bits 10-11: Input capture 4 prescaler.

IC4F

Bits 12-15: Input capture 4 filter.

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, reset: 0x00000000, access: read-write

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OC4M_3
rw 		OC3M_3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OC4CE
rw 		OC4M
rw 		OC4PE
rw 		OC4FE
rw 		CC4S
rw 		OC3CE
rw 		OC3M
rw 		OC3PE
rw 		OC3FE
rw 		CC3S
rw
Toggle Fields

CC3S

Bits 0-1: Capture/Compare 3 selection.

OC3FE

Bit 2: Output compare 3 fast enable.

OC3PE

Bit 3: Output compare 3 preload enable.

OC3M

Bits 4-6: Output compare 3 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC3CE

Bit 7: Output compare 3 clear enable.

CC4S

Bits 8-9: Capture/Compare 4 selection.

OC4FE

Bit 10: Output compare 4 fast enable.

OC4PE

Bit 11: Output compare 4 preload enable.

OC4M

Bits 12-14: Output compare 4 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNTTIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC4CE

Bit 15: Output compare 4 clear enable.

OC3M_3

Bit 16: Output Compare 3 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC4M_3

Bit 24: Output Compare 4 mode - bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT_L
rw
Toggle Fields

CNT_L

Bits 0-15: Low counter value.

CNT_H

Bits 16-31: High counter value (TIM2 only).

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR_L
rw
Toggle Fields

ARR_L

Bits 0-15: Low Auto-reload value.

ARR_H

Bits 16-31: High Auto-reload value (TIM2 only).

CCR1

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR1_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR1_L
rw
Toggle Fields

CCR1_L

Bits 0-15: Low Capture/Compare 1 value.

CCR1_H

Bits 16-31: High Capture/Compare 1 value (TIM2 only).

CCR2

capture/compare register 2

Offset: 0x38, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR2_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR2_L
rw
Toggle Fields

CCR2_L

Bits 0-15: Low Capture/Compare 2 value.

CCR2_H

Bits 16-31: High Capture/Compare 2 value (TIM2 only).

CCR3

capture/compare register 3

Offset: 0x3c, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR3_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR3_L
rw
Toggle Fields

CCR3_L

Bits 0-15: Low Capture/Compare value.

CCR3_H

Bits 16-31: High Capture/Compare value (TIM2 only).

CCR4

capture/compare register 4

Offset: 0x40, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR4_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR4_L
rw
Toggle Fields

CCR4_L

Bits 0-15: Low Capture/Compare value.

CCR4_H

Bits 16-31: High Capture/Compare value (TIM2 only).

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR1

TIM option register

Offset: 0x50, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOCREF_CLR
rw
Toggle Fields

IOCREF_CLR

Bit 0: IOCREF_CLR.

AF1

TIM alternate function option register 1

Offset: 0x60, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ETRSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETRSEL
rw
Toggle Fields

ETRSEL

Bits 14-17: External trigger source selection.

TISEL

TIM alternate function option register 1

Offset: 0x68, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI2SEL
rw 		TI1SEL
rw
Toggle Fields

TI1SEL

Bits 0-3: TI1SEL.

TI2SEL

Bits 8-11: TI2SEL.

USART1

0x40013800: Universal synchronous asynchronous receiver transmitter

124/124 fields covered. Toggle Registers

Show register map

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

24/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXFFIE
rw 		TXFEIE
rw 		FIFOEN
rw 		M1
rw 		EOBIE
rw 		RTOIE
rw 		DEAT
rw 		DEDT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVER8
rw 		CMIE
rw 		MME
rw 		M0
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		UESM
rw 		UE
rw
Toggle Fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: DEDT.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: DEAT.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

FIFOEN

Bit 29: FIFO mode enable.

Allowed values:
0: Disabled: FIFO mode is disabled
1: Enabled: FIFO mode is enabled

TXFEIE

Bit 30: TXFIFO empty interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when TXFE = 1 in the USART_ISR register

RXFFIE

Bit 31: RXFIFO Full interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when RXFF = 1 in the USART_ISR register

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADD
rw 		RTOEN
rw 		ABRMOD
rw 		ABREN
rw 		MSBFIRST
rw 		DATAINV
rw 		TXINV
rw 		RXINV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWAP
rw 		LINEN
rw 		STOP
rw 		CLKEN
rw 		CPOL
rw 		CPHA
rw 		LBCL
rw 		LBDIE
rw 		LBDL
rw 		ADDM7
rw 		DIS_NSS
rw 		SLVEN
rw
Toggle Fields

SLVEN

Bit 0: Synchronous Slave mode enable.

Allowed values:
0: Disabled: Slave mode disabled
1: Enabled: Slave mode enabled

DIS_NSS

Bit 3: When the DSI_NSS bit is set, the NSS pin input will be ignored.

Allowed values:
0: Disabled: SPI slave selection depends on NSS input pin
1: Enabled: SPI slave is always selected and NSS input pin is ignored

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, reset: 0x0000, access: read-write

24/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFTCFG
rw 		RXFTIE
rw 		RXFTCFG
rw 		TCBGTIE
rw 		TXFTIE
rw 		WUFIE
rw 		WUS
rw 		SCARCNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEP
rw 		DEM
rw 		DDRE
rw 		OVRDIS
rw 		ONEBIT
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		SCEN
rw 		NACK
rw 		HDSEL
rw 		IRLP
rw 		IREN
rw 		EIE
rw
Toggle Fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: Ir mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: Ir low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

TXFTIE

Bit 23: threshold interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when Transmit FIFO reaches the threshold programmed in TXFTCFG

TCBGTIE

Bit 24: Tr Complete before guard time, interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated whenever TCBGT=1 in the USART_ISR register

RXFTCFG

Bits 25-27: Receive FIFO threshold configuration.

Allowed values:
0: Depth_1_8: RXFIFO reaches 1/8 of its depth
1: Depth_1_4: RXFIFO reaches 1/4 of its depth
2: Depth_1_2: RXFIFO reaches 1/2 of its depth
3: Depth_3_4: RXFIFO reaches 3/4 of its depth
4: Depth_7_8: RXFIFO reaches 7/8 of its depth
5: Full: RXFIFO becomes full

RXFTIE

Bit 28: RXFIFO threshold interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when Receive FIFO reaches the threshold programmed in RXFTCFG

TXFTCFG

Bits 29-31: TXFIFO threshold configuration.

Allowed values:
0: Depth_1_8: TXFIFO reaches 1/8 of its depth
1: Depth_1_4: TXFIFO reaches 1/4 of its depth
2: Depth_1_2: TXFIFO reaches 1/2 of its depth
3: Depth_3_4: TXFIFO reaches 3/4 of its depth
4: Depth_7_8: TXFIFO reaches 7/8 of its depth
5: Empty: TXFIFO becomes empty

BRR

Baud rate register

Offset: 0xc, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRR
rw
Toggle Fields

BRR

Bits 0-15: Baud rate.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GT
rw 		PSC
rw
Toggle Fields

PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

GT

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BLEN
rw 		RTO
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTO
rw
Toggle Fields

RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, reset: 0x0000, access: write-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFRQ
w 		RXFRQ
w 		MMRQ
w 		SBKRQ
w 		ABRRQ
w
Toggle Fields

ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, reset: 0x00C0, access: read-only

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFT
r 		RXFT
r 		TCBGT
r 		RXFF
r 		TXFE
r 		REACK
r 		TEACK
r 		WUF
r 		RWU
r 		SBKF
r 		CMF
r 		BUSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ABRF
r 		ABRE
r 		UDR
r 		EOBF
r 		RTOF
r 		CTS
r 		CTSIF
r 		LBDF
r 		TXE
r 		TC
r 		RXNE
r 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

LBDF

Bit 8: LBDF.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

RTOF

Bit 11: RTOF.

EOBF

Bit 12: EOBF.

UDR

Bit 13: SPI slave underrun error flag.

ABRE

Bit 14: ABRE.

ABRF

Bit 15: ABRF.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

TXFE

Bit 23: TXFIFO Empty.

RXFF

Bit 24: RXFIFO Full.

TCBGT

Bit 25: Transmission complete before guard time flag.

RXFT

Bit 26: RXFIFO threshold flag.

TXFT

Bit 27: TXFIFO threshold flag.

ICR

Interrupt flag clear register

Offset: 0x20, reset: 0x0000, access: write-only

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUCF
w 		CMCF
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UDRCF
w 		EOBCF
w 		RTOCF
w 		CTSCF
w 		LBDCF
w 		TCBGTCF
w 		TCCF
w 		TXFECF
w 		IDLECF
w 		ORECF
w 		NCF
w 		FECF
w 		PECF
w
Toggle Fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TXFECF

Bit 5: TXFIFO empty clear flag.

Allowed values:
1: Clear: Clear the TXFE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

TCBGTCF

Bit 7: Transmission complete before Guard time clear flag.

Allowed values:
1: Clear: Clear the TCBGT flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of block clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

UDRCF

Bit 13: SPI slave underrun clear flag.

Allowed values:
1: Clear: Clear the UDR flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDR
r
Toggle Fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDR
rw
Toggle Fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

PRESC

Prescaler register

Offset: 0x2c, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRESCALER
rw
Toggle Fields

PRESCALER

Bits 0-3: Clock prescaler.

Allowed values:
0: Div1: /1
1: Div2: /2
2: Div4: /4
3: Div6: /6
4: Div8: /8
5: Div10: /10
6: Div12: /12
7: Div16: /16
8: Div32: /32
9: Div64: /64
10: Div128: /128
11: Div256: /256

USART2

0x40004400: Universal synchronous asynchronous receiver transmitter

124/124 fields covered. Toggle Registers

Show register map

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

24/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXFFIE
rw 		TXFEIE
rw 		FIFOEN
rw 		M1
rw 		EOBIE
rw 		RTOIE
rw 		DEAT
rw 		DEDT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVER8
rw 		CMIE
rw 		MME
rw 		M0
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		UESM
rw 		UE
rw
Toggle Fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: DEDT.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: DEAT.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

FIFOEN

Bit 29: FIFO mode enable.

Allowed values:
0: Disabled: FIFO mode is disabled
1: Enabled: FIFO mode is enabled

TXFEIE

Bit 30: TXFIFO empty interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when TXFE = 1 in the USART_ISR register

RXFFIE

Bit 31: RXFIFO Full interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when RXFF = 1 in the USART_ISR register

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADD
rw 		RTOEN
rw 		ABRMOD
rw 		ABREN
rw 		MSBFIRST
rw 		DATAINV
rw 		TXINV
rw 		RXINV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWAP
rw 		LINEN
rw 		STOP
rw 		CLKEN
rw 		CPOL
rw 		CPHA
rw 		LBCL
rw 		LBDIE
rw 		LBDL
rw 		ADDM7
rw 		DIS_NSS
rw 		SLVEN
rw
Toggle Fields

SLVEN

Bit 0: Synchronous Slave mode enable.

Allowed values:
0: Disabled: Slave mode disabled
1: Enabled: Slave mode enabled

DIS_NSS

Bit 3: When the DSI_NSS bit is set, the NSS pin input will be ignored.

Allowed values:
0: Disabled: SPI slave selection depends on NSS input pin
1: Enabled: SPI slave is always selected and NSS input pin is ignored

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, reset: 0x0000, access: read-write

24/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFTCFG
rw 		RXFTIE
rw 		RXFTCFG
rw 		TCBGTIE
rw 		TXFTIE
rw 		WUFIE
rw 		WUS
rw 		SCARCNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEP
rw 		DEM
rw 		DDRE
rw 		OVRDIS
rw 		ONEBIT
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		SCEN
rw 		NACK
rw 		HDSEL
rw 		IRLP
rw 		IREN
rw 		EIE
rw
Toggle Fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: Ir mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: Ir low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

TXFTIE

Bit 23: threshold interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when Transmit FIFO reaches the threshold programmed in TXFTCFG

TCBGTIE

Bit 24: Tr Complete before guard time, interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated whenever TCBGT=1 in the USART_ISR register

RXFTCFG

Bits 25-27: Receive FIFO threshold configuration.

Allowed values:
0: Depth_1_8: RXFIFO reaches 1/8 of its depth
1: Depth_1_4: RXFIFO reaches 1/4 of its depth
2: Depth_1_2: RXFIFO reaches 1/2 of its depth
3: Depth_3_4: RXFIFO reaches 3/4 of its depth
4: Depth_7_8: RXFIFO reaches 7/8 of its depth
5: Full: RXFIFO becomes full

RXFTIE

Bit 28: RXFIFO threshold interrupt enable.

Allowed values:
0: Disabled: Interrupt inhibited
1: Enabled: USART interrupt generated when Receive FIFO reaches the threshold programmed in RXFTCFG

TXFTCFG

Bits 29-31: TXFIFO threshold configuration.

Allowed values:
0: Depth_1_8: TXFIFO reaches 1/8 of its depth
1: Depth_1_4: TXFIFO reaches 1/4 of its depth
2: Depth_1_2: TXFIFO reaches 1/2 of its depth
3: Depth_3_4: TXFIFO reaches 3/4 of its depth
4: Depth_7_8: TXFIFO reaches 7/8 of its depth
5: Empty: TXFIFO becomes empty

BRR

Baud rate register

Offset: 0xc, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRR
rw
Toggle Fields

BRR

Bits 0-15: Baud rate.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GT
rw 		PSC
rw
Toggle Fields

PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

GT

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BLEN
rw 		RTO
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTO
rw
Toggle Fields

RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, reset: 0x0000, access: write-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFRQ
w 		RXFRQ
w 		MMRQ
w 		SBKRQ
w 		ABRRQ
w
Toggle Fields

ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, reset: 0x00C0, access: read-only

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TXFT
r 		RXFT
r 		TCBGT
r 		RXFF
r 		TXFE
r 		REACK
r 		TEACK
r 		WUF
r 		RWU
r 		SBKF
r 		CMF
r 		BUSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ABRF
r 		ABRE
r 		UDR
r 		EOBF
r 		RTOF
r 		CTS
r 		CTSIF
r 		LBDF
r 		TXE
r 		TC
r 		RXNE
r 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

LBDF

Bit 8: LBDF.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

RTOF

Bit 11: RTOF.

EOBF

Bit 12: EOBF.

UDR

Bit 13: SPI slave underrun error flag.

ABRE

Bit 14: ABRE.

ABRF

Bit 15: ABRF.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

TXFE

Bit 23: TXFIFO Empty.

RXFF

Bit 24: RXFIFO Full.

TCBGT

Bit 25: Transmission complete before guard time flag.

RXFT

Bit 26: RXFIFO threshold flag.

TXFT

Bit 27: TXFIFO threshold flag.

ICR

Interrupt flag clear register

Offset: 0x20, reset: 0x0000, access: write-only

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUCF
w 		CMCF
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UDRCF
w 		EOBCF
w 		RTOCF
w 		CTSCF
w 		LBDCF
w 		TCBGTCF
w 		TCCF
w 		TXFECF
w 		IDLECF
w 		ORECF
w 		NCF
w 		FECF
w 		PECF
w
Toggle Fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TXFECF

Bit 5: TXFIFO empty clear flag.

Allowed values:
1: Clear: Clear the TXFE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

TCBGTCF

Bit 7: Transmission complete before Guard time clear flag.

Allowed values:
1: Clear: Clear the TCBGT flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of block clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

UDRCF

Bit 13: SPI slave underrun clear flag.

Allowed values:
1: Clear: Clear the UDR flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDR
r
Toggle Fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDR
rw
Toggle Fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

PRESC

Prescaler register

Offset: 0x2c, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRESCALER
rw
Toggle Fields

PRESCALER

Bits 0-3: Clock prescaler.

Allowed values:
0: Div1: /1
1: Div2: /2
2: Div4: /4
3: Div6: /6
4: Div8: /8
5: Div10: /10
6: Div12: /12
7: Div16: /16
8: Div32: /32
9: Div64: /64
10: Div128: /128
11: Div256: /256

VREFBUF

0x40010030: System configuration controller

1/5 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CSR
0x4 CCR

CSR

VREFBUF control and status register

Offset: 0x0, reset: 0x00000002, access: Unspecified

1/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VRS
rw 		VRR
r 		HIZ
rw 		ENVR
rw
Toggle Fields

ENVR

Bit 0: Voltage reference buffer mode enable This bit is used to enable the voltage reference buffer mode..

HIZ

Bit 1: High impedance mode This bit controls the analog switch to connect or not the VREF+ pin. Refer to Table196: VREF buffer modes for the mode descriptions depending on ENVR bit configuration..

VRR

Bit 3: Voltage reference buffer ready.

VRS

Bits 4-6: Voltage reference scale These bits select the value generated by the voltage reference buffer. Other: Reserved.

CCR

VREFBUF calibration control register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRIM
rw
Toggle Fields

TRIM

Bits 0-5: Trimming code These bits are automatically initialized after reset with the trimming value stored in the Flash memory during the production test. Writing into these bits allows to tune the internal reference buffer voltage..

WWDG

0x40002c00: System window watchdog

6/6 fields covered. Toggle Registers

Show register map

Offset Name
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x0 CR
0x4 CFR
0x8 SR

CR

Control register

Offset: 0x0, reset: 0x0000007F, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDGA
rw 		T
rw
Toggle Fields

T

Bits 0-6: 7-bit counter (MSB to LSB).

Allowed values: 0x0-0x7f

WDGA

Bit 7: Activation bit.

Allowed values:
0: Disabled: Watchdog disabled
1: Enabled: Watchdog enabled

CFR

Configuration register

Offset: 0x4, reset: 0x0000007F, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDGTB
rw 		EWI
rw 		W
rw
Toggle Fields

W

Bits 0-6: 7-bit window value.

Allowed values: 0x0-0x7f

EWI

Bit 9: Early wakeup interrupt.

Allowed values:
1: Enable: interrupt occurs whenever the counter reaches the value 0x40

WDGTB

Bits 11-13: Timer base.

Allowed values:
4: Div16: Counter clock (PCLK1 div 4096) div 16
5: Div32: Counter clock (PCLK1 div 4096) div 32
6: Div64: Counter clock (PCLK1 div 4096) div 64
7: Div128: Counter clock (PCLK1 div 4096) div 128
0: Div1: Counter clock (PCLK1 div 4096) div 1
1: Div2: Counter clock (PCLK1 div 4096) div 2
2: Div4: Counter clock (PCLK1 div 4096) div 4
3: Div8: Counter clock (PCLK1 div 4096) div 8

SR

Status register

Offset: 0x8, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EWIF
rw
Toggle Fields

EWIF

Bit 0: Early wakeup interrupt flag.

Allowed values:
1: Pending: The EWI Interrupt Service Routine has been triggered
0: Finished: The EWI Interrupt Service Routine has been serviced